Integrating satellite TV into the smart home ecosystem is often a question for users, especially when it comes to a combination of classic receivers and modern Android TVs. Connecting a plate of Tricolor to a Xiaomi TV is a process that requires careful attention to the choice of cables and the right procedure, since directly inserting an antenna cable into a Smart TV connector is usually impossible without a special module.
Modern panels from Xiaomi Mi TV run on the Android TV operating system, which is focused on streaming over the Internet, but support for external sources of signal through HDMI ports is flawlessly implemented, this interface will be the main bridge between your satellite receiver and the TV matrix, providing high-resolution image transmission.
In this article, we will discuss in detail all stages of installation, from checking the configuration to the final configuration of the channels, so that you can enjoy your favorite transmissions in the maximum quality without unnecessary technical difficulties.
Equipment inspection and preparation for installation
Before starting physical work, you need to make sure that you have all the necessary components, since the absence of even one cable can stop the entire process. The standard set of equipment Tricolor usually includes a satellite antenna (plate), a converter, a bracket for mounting and the receiver itself, but cables for connecting to the TV often have to be purchased separately.
Make sure your receiver supports Full HD or 4K image output if your Xiaomi TV has a high-resolution array, otherwise you won’t be able to unlock the screen’s potential. Also check the integrity of the antenna cable going from plate to converter, as oxidized contacts or inflections can significantly reduce signal strength.
- 📡 Satellite antenna with installed converter, aimed at the satellite.
- 📺 Satellite receiver (prefix) Tricolor with remote control.
- 🔌 Cable HDMI-HDMI for high-definition video and audio signal transmission.
- 🔋 Power supply unit for the receiver and a network filter for protection against voltage surges.
It is important to determine the location of the receiver in advance: it should not block the infrared receiver of the TV if you plan to control the volume of the universal remote.
⚠️ Warning: Never connect the antenna cable from the plate directly into the antenna connector on the back of the Xiaomi TV unless you have a built-in satellite tuner. DVB-S2, as this can lead to overloading of the inlet path and the output of the tuner module.
Physical connection of the receiver to the TV
The process of connecting equipment begins with switching the video signal, for which we will use the digital interface HDMI, which provides the transmission of uncompressed video stream and multichannel sound, which is critical for quality TV viewing.
Take an HDMI cable and plug one end of it into a connector labeled HDMI OUT or simply HDMI on the back of the Tricolor receiver. The second end of the cable must be inserted into any free HDMI IN port on the Xiaomi TV body, remembering the port number, as it will be necessary to select the signal source.
☑️ Checking connections
After connecting the video, you need to connect the antenna cable: one end of it should already be screwed into the converter on the plate, and the other end with the F-type threaded connection is gently screwed into the LNB IN or Satellite In connector on the rear panel of the receiver.
Do not put excessive effort when twisting the antenna cable so as not to break the thread on the converter, but make sure that the connection is dense and the central vein of the cable is not closed to the braid.
Entry setting and initial activation
Once all the cables are connected, you need to turn on the equipment in the right order: first turn on the receiver Tricolor button on the case or remote, waiting for the boot of the console operating system. Only after the menu or screensaver appears on the screen you can go to the settings of the TV itself.
Take the remote from the Xiaomi TV and click the signal source select button, which is often indicated as Input or the image of the square with the arrow. In the menu that appears on the screen, select the HDMI port that you connected the cable to, for example, HDMI 1 or HDMI 2.
If the image appears, but it is stretched or has black fields at the edges, you need to go to the image settings of the Tricolor receiver through its menu and select the 16:9 screen format and the resolution corresponding to your TV model.
At this stage, the system may request an update to the receiver software, and this process cannot be interrupted, as this may lead to a software failure.
What do you do if there's no signal?
Solving resolution and sound problems
Often users are faced with a situation where the picture is, but it does not fill the entire screen or the colors look faded. This is solved through the receiver settings menu, where you need to find the System section or screen settings.
This section should force you to set a resolution of 1080p or 2160p (4K) if your receiver model supports Ultra HD, and check the color space settings by selecting RGB or YUV mode depending on which picture looks more natural.
| Parameter | Recommended value | Description |
|---|---|---|
| Permission | 1920x1080 or 3840x2160 | Maximum resolution of the TV matrix |
| Frequency of personnel | 50 Hz or 60 Hz | Depends on the broadcasting standard (PAL/NTSC) |
| Screen format | 16:9 | Standard for Modern Large-format TV |
| Sound. | PCM or Dolby Digital | The choice depends on the connected audio system |
If the audio is delayed or absent, check the audio settings in the receiver menu and make sure that the HDMI digital output is selected, not the analog output.
Using HDMI CEC function on Xiaomi
One of the most convenient features of modern Xiaomi TVs is support for HDMI CEC technology, which allows you to control connected devices from one remote control. By activating this option, you can turn on the Tricolor receiver and switch channels using only the remote control from the TV.
To enable this feature, you need to go to the settings of the Xiaomi TV by selecting the Settings section. → General. → External devices (or Entrances) to find a point CEC or MI Remote Control and switch the switch to active position.
💡
If the console stopped controlling the console after the TV update, try reconnecting the HDMI cable when the devices are off or resetting the CEC settings in the TV menu.
Once the CEC is activated when switching the signal source to HDMI, the TV will automatically command the receiver to turn on if it is in standby mode. This greatly simplifies operation, eliminating the need to search for a second remote in the dark.
It is worth noting that not all models of Tricolor receivers fully support CEC protocols, so the functionality can be limited only to on / off without controlling the menu.
Alternative connectivity options and CI+ modules
If you don’t want to use an external receiver and take up space, you might want to consider using the Common Interface (CI+) module built into your TV, but there’s an important caveat: most Xiaomi TVs sold on the market don’t have a built-in DVB-S2 satellite tuner.
Having a CI+ or Common Interface connector on the back doesn’t guarantee work with Tricolor satellite maps, as this slot is often only designed for DVB-T2 or DVB-C digital terrestrial broadcasting.
⚠️ Note: Before purchasing the access module CI+ and Tricolor cards be sure to check the specification of your specific Xiaomi model on the official website. DVB-S2, module CI+ It will not work and you will still need an external receiver.
Owners of TVs without a satellite tuner can rely on external consoles, which, by the way, often have a more convenient interface and functionality of recording airwaves than built-in solutions.
💡
The external receiver is the most versatile and stable solution for watching Tricolor on Xiaomi TVs, guaranteeing compatibility and full functionality.