The Xiaomi Pad 6 tablet is a powerful device that does great multimedia and office work. However, to unlock the full creative potential of the gadget, it often requires the use of a graphic pen. Model owners are wondering how to connect a stylus to the Xiaomi Pad 6 to begin drawing or taking handwritten notes with maximum accuracy.
The process of interaction of the tablet with the accessory is built on the basis of modern technologies Bluetooth Low Energy. This provides not only instant synchronization, but also economical consumption of the battery of the pen. It is important to understand that for full operation it is necessary to have an original accessory, since third-party solutions may not support critical functions, such as determining the force of pressing.
In this article, we will discuss in detail all the stages of pairing, adjusting sensitivity and using the additional features that the Xiaomi ecosystem provides, you will learn how to avoid common errors and customize the device to your individual needs for drawing or text work.
Compatibility and preparation of equipment
Before you start pairing, make sure your hardware is fully ready to go. Xiaomi Pad 6 officially supports only one type of active pen - Xiaomi Smart Pen 2nd Generation. Attempts to connect the first generation pen or styluses from other manufacturers, such as Samsung S-Pen or Apple Pencil, will not succeed due to differences in data protocols and physical characteristics of the screen.
Make sure your tablet has the current version of the HyperOS or MIUI for Pad operating system installed. Older versions of the firmware may not contain the necessary drivers to work correctly with new accessories. You can check for updates in the settings menu by going to Settings → About Phone → MIUI version.
It is also critical to check the pen's charge before the first connection attempt, so if the accessory has been idle for a long time, its battery could run out of charge, in which case, even after charging, the device may take some time before it becomes visible to the tablet.
💡
Before buying, check the complete set: in a standard box with a tablet, the stylus is usually not supplied, it must be purchased separately.
To start work, perform the following preparation steps:
- 🔋 Charge the tablet to at least 20% for stable operation of the Bluetooth module.
- ✏️ Make sure the tip of the pen is tightly twisted and has no visible damage.
- 🧹 Wipe the magnetic face of the tablet and the side face of the feather with a dry cloth from dust and fat.
- 📱 Unlock the tablet screen and make sure Bluetooth is on.
The primary conjugation process
The main and fastest method of activating the pen is to use magnetic mounting. On one of the narrow faces of the Xiaomi Pad 6 is a special area for wireless charging and pairing. You do not need to search for the device in the Bluetooth list manually, since the system uses instant detection technology.
Apply the side of the pen to the magnetic strip on the body of the tablet. The device itself will stick in the desired position thanks to the built-in magnets. After 1-2 seconds, a pop-up window will appear on the tablet screen with a suggestion to connect the Xiaomi Smart Pen. Press the “Connect” button to complete the procedure.
☑️ Checklist of successful connection
If the automatic window didn't appear, maybe the Bluetooth on the tablet is disabled or the pen has already been paired with another device, in which case you can manually connect through the system menu. Go to Settings → Bluetooth, search the "Xiaomi Smart Pen" in the list of available devices and click on it.
Once you pair successfully, the pen battery indicator will appear at the top of the screen, in the status bar, which indicates that the active connection is established and the device is ready to go, and now you can remove the pen and start using it for navigation or text input.
Function setting and calibration
Once connected, the system will offer a basic setup, but for professional work, it is recommended to delve into a specialized menu. To access advanced options, go to Settings → Stylus or use the widget on the desktop. This is a touch sensitivity setting, which is critical for artists.
In the settings menu, you can select the dual-press mode, which allows you to quickly switch between tools in supported applications such as Xiaomi Notes or WPS Office. By default, double-press activates the creation of a screenshot or puts the eraser mode, but the user can reassign the action.
⚠️ Warning: Don't press the pen too hard during calibration. Excessive force can lead to inaccurate readings of pressure sensors and incorrect eraser operation in the future.
To calibrate touch points, use the built-in Calibration app. Follow the instructions on the screen, consistently touching the points indicated, which will help eliminate the error if you notice that the line is drawn not where the tip of the pen is.
The main parameters available for change:
- 🎨 Pressure sensitivity (4096 levels).
- ⚡ Response speed and survey frequency (up to 240 Hz).
- 🖊️ Assignment of actions for double pressing.
- 🔋 Monitoring the level of charge in real time.
Use in Applications and Hidden Functions
Xiaomi's ecosystem provides a wide range of tools for pen-to-pen work in a variety of scenarios. The standard Notes app offers handwriting-to-print functionality. You can write by hand, and the system automatically recognizes characters and converts them to a digital format that supports editing.
Creative people can use Paint and third-party applications like Autodesk Sketchbook, and with 4,096 pressure levels, lines get thinner or thicker depending on the force of the press, which allows for realistic strokes, and the input delay is only 2 ms, making the drawing smooth and natural.
The Secret Function of Global Allocation
In office suites like WPS Office, the pen allows you to take notes directly on the margins of PDF documents or PowerPoint presentations, which is especially convenient for students and business analysts who need to review large volumes of documentation, and you can highlight, emphasize and add comments by hand.
Comparison of capabilities in different applications:
| Annex | Supporting pressure | Pen deviation | Transformation of text |
|---|---|---|---|
| Xiaomi Notes | Yes. | No. | Yes. |
| WPS Office | Yes. | No. | No. |
| Sketchbook | Yes. | Yes. | No. |
| System menu | No. | No. | No. |
Charging and power consumption
One of the key features of the Xiaomi Smart Pen 2nd Gen is the ability to wirelessly charge directly from the tablet. When the pen is not in use, just attach it to the magnetic face of the device. In this mode, it is not only stored, but also automatically recharged.
The full charge of the pen is about enough 12-15 hours of continuous use, which is equivalent to a few days of active work or a whole school day. If you plan a long trip, make sure that the pen is attached to the tablet during downtime to replenish energy.
⚠️ Warning: Do not leave the pen attached to the tablet off for weeks.Deep discharge of the lithium-polymer battery can lead to its irreversible degradation.
In case the magnetic charging is not working, check if there are any foreign objects between the pen and the body of the tablet, such as covers or protective films covering the contact area.
Indication of battery status:
- 🟢 Green indicator – charge over 80%.
- 🟡 Yellow indicator - average charge (20-80%).
- 🔴 Red indicator – low charge, connection required.
- ⚡ Blinking icon - there is a charging process.
Solution and troubleshooting
Despite the system's fine-tuning, users may experience problems connecting or operating a pen. If the stylus has stopped responding to touch or the connection has gone missing, the first thing you do is unplug it and re-attach it to the magnetic stripe, often restarting the communication protocol.
If the pen is not charging, check if the wireless charging function is enabled in the tablet settings. Sometimes after the system update, the settings are reset, and the automatic power on for the pen can be deactivated. It is also worth rebooting the tablet itself, since this is the clear cache of Bluetooth services.
💡
In 90% of cases, the problem is solved by simply restarting the tablet or re-magnetic pairing.
If the pen is late or the lines are interrupted, check the background. Heavy applications can consume CPU resources without leaving power to quickly process input. Close the redundant programs and clear the RAM.
Common problems and solutions:
- 🔌 Pen not visible in Bluetooth: Turn Bluetooth on and off, reboot tablet.
- ✍️ Lines shaking: Remove the protective glass if it is too thick or of poor quality.
- 🔋 No charging: Clean contacts with an alcohol napkin.
- 📉 Battery goes down quickly: Turn off constant pen polling in settings if it's not needed.