How to connect a stylus to a tablet Xiaomi Pad 5: a complete guide with expert advice

The Xiaomi Pad 5 has become one of the most popular devices for creativity, learning and work thanks to its high-quality 120Hz refresh screen and active stylus support. However, many users face difficulties when first connecting a stylus - the device does not recognize, there are delays or the stylus refuses to work after updating the firmware. In this article, we will discuss all the nuances of pairing a stylus with the Xiaomi Pad 5, including official and alternative methods, as well as practical recommendations for adjusting sensitivity and eliminating typical errors.

It’s important to understand that not all styluses are compatible with this tablet model.The manufacturer recommends using the original Xiaomi Smart Pen (or its modifications), but there are third-party counterparts on the market that support Wacom technology. AES We have analyzed user reviews and technical specifications to provide the most comprehensive guide, from basic customization to solving rare problems that are not covered in official documentation.

What styluses are compatible with Xiaomi Pad 5?

Xiaomi Pad 5 supports only two types of stylus:

• 🔹 Xiaomi Smart Pen (MMT-LS01ZHM) — The original stylus with 4,096 levels of pressure sensitivity, magnetic mounting and 24ms response time comes bundled with some tablet modifications (e.g., Xiaomi Pad 5 Pro).
• 🔹 Xiaomi Smart Pen 2 (MMT-LS02ZHM) — Updated version with improved ergonomics, voice assistant button and gesture support (double tap for screenshots). MIUI Up to version 13.1.5 and above.

Third-party manufacturers also produce stylus with support for the Wacom protocol AES, But their compatibility can vary, MEKO or Zagg often works with Xiaomi Pad 5, but may require manual adjustment or firmware updates:

• 📋 Wacom technology AES 1.0/2.0 (necessarily!).
• 🔋 Automatic Bluetooth pairing (some budget models require manual connection via Settings) → Bluetooth).
• ⚡ Minimum response time is not higher than 30 ms (otherwise, delays in drawing will be noticeable).

Styluses from other brands (such as Samsung S Pen or Apple Pencil) are physically incompatible with the Xiaomi Pad 5 due to different recognition technologies.

Preparation of the tablet before connecting the stylus

Before you start pairing, make sure your Xiaomi Pad 5 is ready to work with a stylus. Skipping these steps often leads to errors like "Device not detected" or "Stylus not responsive to touch."

Update. MIUI last-minute|Turn on Bluetooth in the settings|Charge the stylus (minimum 20%)|Remove old paired devices from the Bluetooth list|Restart the tablet (optional if the stylus has not previously connected)-->

Pay special attention to firmware updates. Xiaomi Smart Pen 2 stylus won't work on versions MIUI below 13.1.5. To check the relevance of the software:

1. Open Settings → About the phone → System update.
2. Click "Check Updates" and install all available packages.
3. After the update, restart the tablet - this will reset the cache of the Bluetooth module.

If you use custom firmware (like LineageOS or Pixel Experience), check if it supports Wacom. AES. Some assemblies require you to stitch the kernel with the stylus drivers separately:

fastboot flash boot magisk_patched.img


fastboot reboot

Warning: Firmware of unofficial software can lead to loss of warranty and unstable operation of the stylus. MIUI.

Step-by-step: how to connect a stylus to the Xiaomi Pad 5

The pairing process depends on the stylus model, and below we will look at both options for the original Xiaomi Smart Pen and third-party counterparts.

Method 1: Connecting the original Xiaomi Smart Pen

The original stylus is automatically connected when you first contact the screen, but sometimes you need to manually adjust.

1. Remove the stylus from the package and remove the protective film from the tip (it blocks the signal!).
2. Press and hold the power button on the stylus for 3-5 seconds until the indicator flashes blue.
3. Touch the tip of the stylus screen of the tablet - a request for pairing should appear.
4. Confirm the connection in the pop-up window (click "Connect" or "Pair").

If the stylus doesn't respond:

• 🔋 Check the charge (the indicator should burn green when connected to the charger).
• 📱 Reboot the tablet and try again.
• 🔄 Reset the stylus settings: press and hold the power button for 10 seconds until the indicator goes out.

Method 2: Connecting a third-party stylus

Third-party styluses (such as Lamzy Pen or Lamzy Pen) MEKO Universal Stylus often requires manual pairing via Bluetooth:

1. Turn on Bluetooth on your tablet: Settings → Connections → Bluetooth.
2. Activate the stylus (usually by pressing the switch button long).
3. In the list of available devices, find the name of your stylus (for example, "MEKO Pen) and select it.
4. Confirm pairing if you need to enter PIN- code (usually 0000 or 1234).

Once connected, check the stylus in a drawing app (such as Xiaomi Notes or Adobe Fresco).If the lines are intermittent or late, try calibrating the stylus:

1. Open the settings → Additional → Stylus.
2. Select "Calibration" and follow the instructions on the screen.

💡

If the stylus is plugged in but not drawing, check if Palm mode is on in the screen settings. Turn it off in Settings. → Special facilities → touching

Setting up sensitivity and additional functions

Once the stylus is successfully connected, it can be customized to suit your needs. The Xiaomi Pad 5 has the following options:

It's useful for artists and designers to turn off line smoothing in drawing applications, which smooths lines but adds delay.

1. Open the brush settings (Brush Settings).
2. Go to the Stabilization tab.
3. Set the 0% value for minimum delay.

Note: if you use a stylus to sign documents (e.g., in the PDF-In the stylus settings, enable Precision mode, which will reduce sensitivity to casual palm touch, but may require more pressing.

Typical problems and their solutions

Even after connecting properly, users are faced with errors, and we've collected the most common cases and ways to fix them.

Problem 1: Stylus connects, but does not draw

Causes and solutions:

• 🛠️ Damaged tip - replace it (complete with stylus are spare).
• 📱 Case conflict - some magnet cases block the stylus signal. Remove the case and check the work.
• 🔧 Driver Failure – Reboot the tablet or reset the stylus settings (long press on the power button).

Problem 2: Drawing delays (lag)

Most often, lags arise due to:

• 🐢 Low screen refresh rate – set 120Hz in display settings.
• 🗑️ Overloaded memory – Close background applications (especially games or video editors).
• 📶 Bluetooth interference – disable other devices (earphones, fitness bracelets).

Problem 3: The stylus spontaneously shuts down

This is a typic for third-party styluses.

• 🔋 Check the battery charge of the stylus (the indicator should burn green).
• 📵 Turn off power saving mode for Bluetooth in battery settings.
• 🔄 Reconnect the stylus, previously removing it from the list of associated devices.

Note: If the stylus is turned off during painting, the problem may be overheating the tablet. Xiaomi Pad 5 automatically reduces performance at temperatures above 45°C, which affects the Bluetooth connection. Let the device cool down or use a cooling stand.

How to prolong the life of a stylus: tips for care

The average lifespan of the original Xiaomi Smart Pen is about 2-3 years when used actively. To avoid premature wear, follow these guidelines:

• 🔋 Charging: Use only the original cable (included).Do not leave the stylus on charging for more than 2 hours - this reduces battery capacity.
• 🧹 Clean: wipe the tip with an alcohol napkin once a week.Dust and fat from the screen accumulate on the sensor and impair accuracy.
• 🧲 Storage: Avoid contact with magnets (e.g., in clasp cases).A strong magnetic field can damage the tilt sensor.
• 🌡️ Temperature: Do not leave the stylus in direct sunlight or near heat sources (e.g., on the dashboard of a car).

If the stylus tip is worn (burbs or scratches appear on the screen), replace it.Combined with the Xiaomi Smart Pen comes with 2 spare tips.

1. Carefully pull the old tip with tweezers.
2. Insert a new one before clicking (do not make excessive efforts!).

💡

Never use a stylus with a damaged tip – this will scratch the anti-reflective screen covering of the Xiaomi Pad 5, which cannot be repaired.

Alternative ways to use stylus

The stylus for the Xiaomi Pad 5 is not just for drawing, but here are some non-obvious scenarios:

• 📝 Signature of documents: use Adobe Acrobat Reader or Xodo PDF In the stylus settings, enable Accuracy mode for clear lines.
• 🎮 Game controller: In some games (such as Genshin Impact or Call of Duty Mobile), the stylus can be configured as a virtual joystick via the Octopus app.
• 📚 Books in Google Play Books or Moon+ Reader stylus conveniently highlight text and make notes.
• 📊 Data Analytics: In Excel or Google Sheets, the stylus makes it easier to work with graphs and diagrams (more precisely than with a finger).

For advanced users: if you are engaged 3D-In simulations (e.g. Blender or Nomad Sculpt), the stylus can be used to precisely control the camera:

1. Connect the tablet to the PC by USB-C DeX mode (if supported).
2. In the settings 3D-Designate the stylus as the main navigation tool.

💡

The Xiaomi Notes app has a hidden feature for converting handwritten to printed text. To enable it, write a few words with a stylus, then click on the text and select "Convert to printed."

FAQ: Frequent questions about the stylus for Xiaomi Pad 5