How to connect a selfie stick to the phone Xiaomi Redmi via Bluetooth

Owning a Xiaomi Redmi smartphone opens up a lot of opportunities for mobile photography, but it can be difficult to take a high-quality group photo or capture a panorama without the help of hands. It is in such situations that the monopod, or, as it is more commonly called, a selfie stick, becomes an indispensable assistant. Modern models are equipped with Bluetooth wireless modules, which allows you to control the camera shutter at a distance of up to 10 meters, providing maximum freedom of action.

The process of synchronizing an accessory with a device based on the MIUI shell or HyperOS is usually easy, but has its technical nuances. Standard monopods use volume button emulation rather than specific camera commands, which often causes confusion among users who expect instant response without additional settings. In this guide, we will detail the algorithm of actions that ensures a stable connection.

The wrong sequence of actions can lead to the fact that the phone will see the device, but will not be able to transmit control signals to it. We will consider not only the standard connection, but also methods for solving common problems when the button on the pen does not respond.

Preparation of equipment and compatibility check

Before you start pairing, you need to make sure your monopod is fully charged and in good condition. Most budget models come with a built-in small battery that lasts for hundreds of images, but prolonged storage without use could drain the battery. Connect the device to the power source via a Micro-USB or USB-C port for 15-20 minutes, even if the indicator shows a charge.

An important step is to put the monopod in search mode. This usually requires a long press on the main control button until the LED indicator flashes quickly in blue or red-blue. If there is no indication, check the instructions for the specific model, since some manufacturers activate the (pairing) mode by simultaneously pressing two buttons.

• 🔋 Make sure that the battery charge of the monopod is at least 20% for stable operation of the module.
• 📱 Check if the Bluetooth module is on in your smartphone and is visible to other devices.
• 🔍 Clear the list of previously connected devices in your phone settings if too many have accumulated.

Xiaomi smartphones have a high degree of compatibility with peripherals from different manufacturers, but older versions of the Android operating system may require additional drivers. In modern firmware, MIUI 12, 13, 14 and newer support for HID profiles (Human Interface Device) is built in by default, which simplifies the procedure to a minimum.

Step-by-step instructions for connecting via Bluetooth

The setup process starts with activating the wireless interface on the smartphone itself. Open the swipe notification curtain from top to bottom and tap the Bluetooth icon, holding your finger to the extended menu. The alternative route is through system settings: go to Settings → Bluetooth and activate the switch at the top of the screen.

Once the module is turned on, the phone will automatically start scanning the surrounding space, at which point the indicator signaling readiness for connection should be lit or flashed on the monopode. In the list of available devices on the Xiaomi screen, the name of your accessory will appear on the Xiaomi screen, which often contains the manufacturer's markings, for example, Yunteng, Selens or a generic name like Bluetooth Remote.

Click on the device name in the list. The system may request a pairing confirmation or input. PIN-The standard combinations for most Chinese accessories are 0000 or 1234, and once the code is successfully entered, the device status will be marked "Connected" or "Used for sound and phone," which is the norm even for camera control devices.

⚠️ Note: If the device status changes to Connected after you connect and is immediately reset, try forgetting the device in Bluetooth settings and repeating the procedure again, having previously restarted the monopod.

Setup of the camera application to work with a monopod

The most critical issue faced by Xiaomi Redmi owners is the lack of camera response to pressing a button on the handle, because Xiaomi’s standard Camera app doesn’t always correctly handle external shutter signals by default, especially if they emulate volume buttons.

Open the camera app and go to the settings menu by clicking on the three horizontal bars in the top right corner. Find the section that controls the shutter. Different versions of MIUI may call this item differently, but it comes down to choosing the source of the signal to create the image.

• 📸 Click on the settings menu (three bars) in the camera interface.
• 🔘 Find the item "Loudness button" or "Loudness button action».
• ✅ Select the option “Take a photo” or “Stop the shutter».

Once the changes are made, the standard audio buttons on the phone body will also start taking pictures, which confirms that the setting is correct. Since Bluetooth monopods emulate these buttons, now the remote button must work properly. If the setting is not found in the standard application, it is recommended to use third-party cameras such as Open Camera, where the management of external devices is implemented more flexibly.

Use of third-party applications for advanced functions

For users who don’t have enough of a standard camera, the market offers a lot of specialized applications, like Camera360, B612 or Open Camera, which have their own Bluetooth signal processing algorithms, which often solve compatibility problems, allowing you to adjust shooting intervals, add filters and control exposure remotely.

When installing third-party software, you need to be careful about permission requests. The application will need access not only to the camera and microphone, but also to Bluetooth devices. New versions of Android on Xiaomi may have a system window requesting permission to search for devices when it first starts, which must be confirmed.

The use of specialized software is especially relevant for video bloggers who need to control video recording, not just photography, and in the settings of such applications, you can often find the option "Volume Keys" or "External Button", where you assign an action to the button on the monopode, which allows, for example, to switch between the front and rear cameras or start and stop recording videos.

Solution: The monopod does not respond or shut down

One of the common problems is when the device connects but does not control the camera. 90% of the time, this is solved by switching the mode of operation of the stick itself. Some models have a dual purpose of buttons: short press can take photos, and long press can switch cameras. If there is no reaction, try changing the assignment of buttons in the Bluetooth settings of the phone itself (set buttons next to the device name), if this option is available in your version of the OS.

Another common reason is energy saving: MIUI is known for aggressive battery optimization, which can kill background processes or limit peripheral performance to save energy. Go to the battery settings, find a list of applications, and make sure that the Camera app and Bluetooth system services have a "No Limits" limit.

💡

If the monopod is spontaneously disconnected through 5-10 Check if your phone is power-saving. Also try to turn off geolocation, as in some versions of Android, scanning Bluetooth devices is closely related to the phone. GPS-module.

In case the phone doesn’t see the monopod at all, although other devices detect it, there may be a problem with the Bluetooth cache. Try clearing the system service cache: go to Settings → Apps → All Apps → Show system processes → Bluetooth and select “Clean”. After that, the phone will need to restart.

⚠️ Warning: Do not try to connect the monopod to the phone while it is in charging mode.This can cause power conflicts and damage the Bluetooth controller on both the stick and smartphone.

Features of working with video shooting and timelapses

Using monopods opens up access to genres like timelapse and slow motion, where camera immobility is critical. When setting up video recordings via Bluetooth, it's important to consider that most simple monopods only support start and stop recording. To zoom or change focus during recording, you'll need more expensive models with gyroscopes and own applications.

To create quality timelapses on Xiaomi, it is better to use the built-in mode in the camera app. Set the phone on a monopod, lock it, select the “More → Timelapse” mode and press the button on the handle to start. In this mode, long-term connection stability is especially important, so make sure that the phone does not go into sleep mode with the screen going out if this interrupts the recording process.

• 🎥 For video blogs, use a tripod stand for monopod stability.
• ⏱️ When shooting timelapses, block exposure and focus so that the picture does not float».
• 🔋 Keep your phone in flight mode so incoming calls don't interrupt video recording.

Some advanced users use the phone's rotating ability. If your monopod allows you to rotate the clamp 360 degrees, you can easily switch between horizontal and vertical orientation of the frame, which is especially true for shooting content in Stories or TikTok. Mechanical rotation does not require a Bluetooth reconnection and works instantly.

Frequently Asked Questions (FAQ)

💡

The main secret of successful shooting with a monopod on Xiaomi is the correct setting of the action of the volume buttons in the camera application and turning off aggressive energy saving for Bluetooth services.