Connecting the remote by Rostelecom to the Xiaomi Mi TV TV: instruction and problem solving

If you connect interactive TV from Rostelecom to the Xiaomi Mi TV TV, But the remote from the provider refuses to work, the problem is not the breakdown - just the devices are not synchronized. TV (especially the Mi models TV 4S, Mi TV 5, Mi TV Q1/Q2) use their own control protocols, and Rostelecom remotes (for example, STB-104 or iPTV-01) This article is about step-by-step connectivity, codes for synchronization, and solving common errors.

It is important to understand: the problem is not in the brand of the TV, and in the lack of universal compatibility between the remotes of providers and Smart. TV. Even if there's a button on the remote. TV, This does not guarantee automatic work with Xiaomi. We will discuss 3 main methods: binding by code, configuring through the HDMI-CEC and alternative solutions (for example, using the original Mi Remote console paired with the console).

Before you start, check:

• 🔌 Is the console connected to the TV via Rostelecom HDMI?
• 🔋 Whether the batteries work in the remote (replace them if in doubt).
• 📺 Is the TV on? HDMI-CEC (It’s called Mi AnySee in Xiaomi).

1. Ways to connect the remote by Rostelecom to Xiaomi Mi TV

There are three main synchronization options, depending on the remote and TV model:

1. Code binding is a universal method for most remotes by Rostelecom (suitable for STB-104, iPTV-01, MAG-250/322). Required to enter 3–4-manual.
2. Customization through HDMI-CEC — if the prefix is connected to HDMI, You can make the remote control control the TV through this protocol (does not work on all Xiaomi models).
3. Use the original Xiaomi remote – if the first two methods do not work, you can control the console via Mi Remote (tethering is required in the Mi Home application).

So, the most reliable way to start is by code binding, which works 80 percent of the time, but requires you to follow the instructions exactly.

💡

Code binding is the most reliable way, but it requires precise digits, and even a single digit error will cause a failure.

2. Reference remote by Rostelecom code (step-by-step instruction)

This method is suitable for remotes Rostelecom with a button TV or SETUP. If there is no such button, skip this section and proceed to the settings through HDMI-CEC.

Algorithm of action:

1. Turn on the Xiaomi Mi TV TV and wait for the loading.
2. On the remote control Rostelecom press the buttons at the same time TV + OK (or SETUP + OK) 3-5 seconds until the indicator flashes twice.
3. Enter one of the codes for Xiaomi (see table below). After each digit, the indicator should flash once.
4. After entering the last number, click OK — If the code fits, the indicator will flash twice, and the remote will start working.

If the code does not fit, repeat the procedure with another option from the table.

If none of the code fits, try auto-search:

1. Hold it. TV + OK double-blink.
2. Enter 9999, the indicator should flash twice.
3. Point the remote to the TV and press CH+ (or VOL+) Every 2 seconds until the TV reacts.
4. After activation, press OK preserve.

Replace the batteries in the remote|Make sure the TV is on|Check that there are no obstacles between the remote and the IR receiver|Try alternative code if the first one doesn’t work-->

3. Setup through HDMI-CEC (Mi AnySee)

If the squat is connected to the TV through HDMI, You can try to activate the protocol. HDMI-CEC. Xiaomi calls it Mi AnySee and lets you control TV from the console (and vice versa).

How to turn on:

1. Open the settings of the TV: Settings → Devices and connections → HDMI-CEC (Mi AnySee).
2. Activate the switch on.
3. In the menu of the console Rostelecom find the section Settings → Remote management → Control TV and turn on the option.
4. Restart both devices (turn off the socket for 30 seconds).

The remote control then controls the basic functions of the TV: turn on, volume, switch inputs.

• ❌ It doesn't work on Mi models. TV Over 2019 (no support) HDMI-CEC).
• ❌ Not all remote buttons will work (e.g. Netflix or Prime Video).
• ❌ May be in conflict with others HDMI-devices (e.g., a sound panel).

💡

After inclusion HDMI-CEC TV spontaneously switches inputs, disable Autoswitch function HDMI in the Mi AnySee settings.

4. Alternative management practices

If there's no code binding, no HDMI-CEC It didn’t work, there are two options:

4.1 Use of the original Xiaomi remote

You can control the console Rostelecom via the remote Mi Remote (if it supports IR control of other devices).

1. Open the Mi Home app on your smartphone.
2. Add a new device. → DU remote → Other devices.
3. Choose a Rostelecom brand (or a General IR device if not listed).
4. Follow the instructions on the anchor screen.

After that, you can control the console via Mi Remote, but not the TV – it will need a separate remote.

Connecting Bluetooth remote

Some models of Xiaomi Mi TV (Like Mi. TV Q2 2023) supports Bluetooth remotes. You can:

• 🎮 Buy a universal Bluetooth remote (for example, Xiaomi Mi Game Controller).
• 📱 Use your smartphone as a remote via the Mi Remote app (requires a connection to a single Wi-Fi network).
• 🖱 Connect a wireless keyboard with a touchpad (e.g., Xiaomi Mi Wireless Keyboard).

Typical problems and their solutions

Even after successful binding, there can be failures.

5.1. the remote is unstable (with delays)

Causes and solutions:

• 🔋 Replace the batteries with new ones (even if the light is on).
• 📶 Interference from other IR devices – remove other remotes from range (for example, from the air conditioner).
• 🔄 Code conflict – reset the remote settings (click on) TV + OK 10 seconds) and repeat the binding.

5.2 Some buttons are not working.

This is normal: universal remotes do not support all the features of Xiaomi Mi TV. Decisions:

• 🎛 Use the original Mi Remote for unavailable features (e.g., running Google Assistant).
• 🔧 Reassign buttons via the remote menu (if you have such an option).
• 🖥 Control your TV through the Mi Remote app on your smartphone.

5.3 The remote stopped working after the firmware update

Android Updates TV Sometimes they reset the IR port settings:

1. Re-link the remote by code (see section 2).
2. Reset the TV settings to factory: Settings → The device → Reset.
3. Roll back the firmware (if available) or wait for the next update.

💡

Before resetting your TV settings, record or photograph the current image and sound parameters – after resetting, they will have to be reconfigured.

6. Compatibility of remotes by Rostelecom with different models of Xiaomi Mi TV

Not all Rostelecom remotes work equally well with Xiaomi, and the table below shows the data on compatibility:

Important: remotes with Bluetooth support (for example, STB-105) Can conflict with the built-in Bluetooth module Xiaomi Mi TV. In this case, turn off Bluetooth on the TV or use IR mode.

7. Frequent errors in connection

User experience shows that 70% of problems are caused by three errors:

⚠️ Note: If the indicator on the remote flashed once (not two) after entering the code, the code did not survive. Repeat the procedure by holding the buttons longer (5-7 seconds).

• 🔢 Incorrect code entry, make sure you enter the numbers sequentially, without pause.
• 📺 The TV is not in code standby mode – before entering the code, make sure that the indicator on the remote flashes twice (ready signal).
• 🔌 Conflict with other IR devices – disconnect from the socket other devices with IR panels (air conditioning, music center).

Another common mistake is trying to tie the remote when the TV is off. TV must be enabled at the time of entering the code, otherwise the command will not be accepted.

FAQ: Answers to Frequent Questions