Buying a new generation game console is always an exciting moment, especially when it comes to the powerful PlayStation 5. However, the joy of unpacking can be overshadowed if the image on the screen does not meet expectations or is not at all. Owners of modern equipment Xiaomi and Redmi often face the need to properly configure ports to unlock the full potential of the console. Connection is not limited to simply inserting a cable, because to get a picture in 4K at 120 Hz requires compliance with a number of technical nuances.
Modern Chinese brand TVs come with advanced matrices and interfaces, but factory settings are often geared toward broadcast content rather than interactive games.This can lead to input delays or incorrect display of HDR color gamuts. Properly configuring HDMI 2.1 ports avoids artifacts and ensures stable high-bandwidth data transfer. In this article, we will take a detailed look at each stage of the setup so you can enjoy graphics without compromise.
Before you go to the menu, you need to physically connect devices using a quality cable. Many users make the mistake of using old wires from previous consoles, which limits the capabilities of the new technology. Only a high speed HDMI cable certified for 48 Gbps guarantees all the functions of the PlayStation 5 on Xiaomi TVs. Next we will consider how to choose the right port and activate the necessary screen modes.
Choosing the right one HDMI-port-and-cable
The first step in the installation process is a physical connection. The back of Xiaomi Mi TV or Redmi TVs usually has several connectors, but not all of them are the same. For maximum performance of the console, you need to find a port with an eARC mark or a special designation for gaming devices, since it supports the full bandwidth of HDMI 2.1. Using other connectors can limit the refresh rate to 60 Hz or reduce the color depth.
The cable that comes with the Sony console is the best choice.It has enhanced insulation and contacts designed for high currents and data rates. If you decide to use a third-party wire, make sure it is certified by the Ultra High Speed standard. Cheap counterparts often can't transmit an HDR10 signal without losing quality, making the game visually less saturated.
💡
Use a cable no longer than 2 meters long to avoid signal loss at 4K and 120Hz resolutions.
Once the cable is connected to an HDMI 3 or HDMI 4 port (depending on the TV model), switch the signal source. On the remote, press the login select button and make sure that the port that the plug is inserted is selected. Sometimes the system does not see the console immediately if it was turned on before the cable was connected.
Setting up the image and game mode
Once the image appears on the screen, it is important to immediately optimize the display settings to reduce input delay. Standard image modes such as "Cinema" or "Standard" add post-processing, which increases input lag. For a comfortable game of dynamic shooters or fighting games, this is critical. You need to go to the image settings and select the profile "Game" or "Game Mode".
In the settings menu of the Xiaomi TV, you should activate HDMI 2.0/2.1 in advanced settings. By default, the port can work in compatibility mode 1.4, which will not allow you to run games in 4K with high frame rate. Switching to Enhanced or 2.0/2.1 mode unlocks the full potential of the connection.
⚠️ Attention: When changing mode HDMI If you go to an "Enhanced" screen, it can blink or go out for a few seconds, and that's the normal response of the system to changing the protocol.
For PlayStation 5, the best choice is the RGB Full or Auto format, which ensures the correct transfer of black and white. If the image seems faded or too contrasting, check that dynamic contrast is turned off, as it can distort the picture in dark scenes of games.
Activation of HDR and Dolby Vision
One of the key features of the PlayStation 5 is the support of technology. HDR (Xiaomi High Dynamic Range TVs with Dolby Vision and HDR10+ They can display an incredibly wide range of brightness, and to activate this feature, you have to go into the screen settings and make sure that the switch is there. HDR It's in the on position. Some models require manual activation for each of them. HDMI-port-of-port.
The console itself also requires calibration. When you first start up or through the settings menu, select "Video Customization" in the Screen and Video Output section. The system automatically determines the capabilities of your Redmi or Mi TV and suggests optimal settings. Don't ignore this step, as improper calibration can cause parts in the shadows or in light areas to simply be out of sight.
If your TV supports Dolby Vision for gaming, make sure that the PS5 settings in the Video Output section select automatic switching, which will allow compatible games to automatically run in high dynamic range mode, making the picture more lively and realistic without user intervention.
What to do if HDR is not turned on?
Customization of sound: PCM, Bitstream and eARC
Quality audio is just as important as graphics. Xiaomi TVs often mediate between the console and the audio system. If you have an eARC-enabled soundbar or home theater, connect them to the appropriate TV port. In PlayStation 5 audio settings, select the Bitstream output format so that the TV or receiver can decode Dolby Atmos or DTS formats on its own.
If you use built-in TV speakers, set up PCM (Linear PCM) output to take the decoding load off the TV and ensure minimal audio latency. It is important to check the settings of the Mi TV itself: in the Sound section, select Standard or Film mode, but be sure to turn off any surround sound effects if they cause distortion or echo.
For users who appreciate silence at night, the night mode feature is relevant, which equalizes the volume of quiet and loud sounds. On PlayStation 5, it is on the sound menu, and on Xiaomi TVs it can be called Night Mode or Clear Voice.
| Parameter | Recommended value | Where to find out. |
|---|---|---|
| Permission | Automatic (4K) | PS5: Settings -> Screen |
| Frequency of update | 120 Hz (if supported) | PS5: Settings -> Screen |
| HDR format | Automatically. | PS5: Settings -> Screen |
| HDMI mode | 2.1 / Enhanced | TV: Settings -> Entrances |
☑️ Checking the sound settings
Solution: black screen and flicker
Often, users are faced with a situation where the console turns on, but the Xiaomi screen is left with a black background or a message appears “No signal”. Most often the problem lies in the discrepancy between the resolution that the console is trying to output and the capabilities of the current HDMI mode. Try to start the PlayStation 5 in safe mode, holding the power button to the second beep, and select the option to change the video resolution.
Screen flickering or occasional signal loss may indicate a cable problem or port overheating.Make sure the cable is tightly inserted into the connector.If the problem persists, try connecting the console to another HDMI port, preferably one labeled 4K@120Hz or similar.A full power reset sometimes helps: turn the TV off from the socket for 1-2 minutes, then turn it on again.
⚠️ Note: If you use adapters (such as HDMI-to-DVI or older converters), the PlayStation 5 is in mode. 4K HDR You can't do that. You can only use a direct connection.
In rare cases, conflict can arise from HDCP (Digital Content Protection) settings. Make sure that PS5 settings enable HDCP. Without this, many streaming apps and some games may refuse to run or display a black screen instead of a video sequence.
Use of additional Smart TV functions
Xiaomi Android TVs or Google TVs offer console integration. You can use the TV remote to basic control media applications running on the PS5 if CEC (Consumer Electronics Control) is enabled. On the TV menu, this option is often called HDMI Management or MI Remote Control. This allows you to turn the console on with the TV with a single tap.
Also worth mentioning is the possibility of streaming: By installing PS Remote Play or similar services on the TV itself (if available from the Mi Store or Google Play app store), you can stream images from other devices, but for native play, you better rely on direct connectivity, because wireless technology cannot yet provide the same responsiveness and quality of the picture as a cable connection.
💡
Direct cable connection via HDMI 2.1 always provides better performance and lower input latency compared to any wireless broadcast methods.
Setup of the PlayStation 5 and Xiaomi TV bundle provides access to high-quality gaming experience. Choosing the right port, cable and software settings avoids most common problems. Following these guidelines, you can fully immerse yourself in virtual worlds with maximum detail and smoothness.