The PlayStation 4 gaming console remains one of the most popular platforms for gamers around the world, despite the arrival of newer generations.Many owners of Xiaomi smart TVs powered by the Android operating system TV Or PatchWall, which is designed to maximize the quality of the image and sound when you use the console. HDR High refresh rate, which is critical for modern exclusives.
The process of connecting devices seems trivial, but in the Xiaomi ecosystem there are nuances of setting ports and signal formats. Incorrect configuration can lead to the console will give an image in low resolution or not determine the display at all. In this article, we will discuss in detail all the steps, from choosing a cable to fine-tuning the color reproduction and sound path.
First, you need to make sure your Xiaomi TV and PS4 console are turned off.This is a basic safety rule that helps avoid power surges and potential failures in the operation of HDMI ports. Only after the equipment is ready can you move to a physical connection and software setting.
Choosing the Right HDMI Cable and Port
To connect the PlayStation 4, especially the Pro version, to a Xiaomi TV, it is strongly recommended to use an HDMI 2.0 or higher cable. Older 1.4 cables may not support 4K signal transmission at 60Hz or HDR format, which will limit your gaming experience.
Not all connectors can be the same: often one of the ports is labeled as HDMI 2.0 or HDMI ARC. This is the port you should connect to for maximum bandwidth. In some TV models, only the first port supports the full HDCP 2.2 specification necessary for secure content to work.
⚠️ Note: Using cheap cables from unknown manufacturers often results in screen flickering or periodic blackout. Investing in a certified High Speed cable with Ethernet will save you a lot of problems in the future.
The length of the cable also matters: If the distance between the console and the TV is more than 3 meters, the signal quality can deteriorate, and in such cases it is better to use active cables or fiber optic solutions that guarantee stable data transfer without loss.
💡
Use cables marked “Premium Certified” – they undergo additional checks for compliance with HDMI 2.0 and higher standards.
Physical connection and initial launch
After selecting the right cable, you need to make a physical connection: insert one end of the cable into the HDMI OUT port on the back of the PS4 console, and the other into the selected HDMI port on the Xiaomi TV. Make sure the cable is inserted to the end; a characteristic click will confirm the correct connection.
Now turn on the TV and switch the signal source. On the Xiaomi remote, click the login select button (often denoted as Input or the arrow square icon). In the menu that appears, select the appropriate port number, such as HDMI 1 or HDMI 2.
After selecting the source, turn on the PlayStation 4 console by pressing the power button on the case or on the DualShock 4 controller. If done correctly, you will see the PS4 logo on the screen. In case the image does not appear, check if the indicator is on the TV port (if any) and try reconnecting the cable.
- 🎮 Make sure the console is connected to the power supply and the indicator is lit white.
- 📺 Check that the TV is switched to the right entrance. HDMI, cable-wise.
- 🔌 If an adapter or receiver is used, make sure they support the permission. 4K.
- ⚡ Try to remove and re-insert the cable. HDMI from both sides to improve contact.
☑️ Connection check
Setting up the image in the PlayStation 4 menu
Once the system is successfully launched, you need to configure the output of the image. Go to the Settings menu on the PS4 main panel, then select Sound and screen. Here are the key parameters that affect the image quality on your Xiaomi TV.
First, go to Video Settings. At Resolution, select Automatically so that the console can determine the display's capabilities. However, if you want to force maximum quality, choose 2160p (YUV420) or 2160p (RGB) depending on your Xiaomi model's support. Pro and Pro Slim models have 4K resolution available.
Pay special attention to setting up HDR (High Dynamic Range). In the video settings menu, find HDR and set the value Automatic. Xiaomi TVs with Dolby Vision or HDR10+ support may require additional mode activation in their settings, as discussed below.
⚠️ Warning: If you see a message saying "No resolution can be changed" or the screen turns black, your cable or TV port does not support the mode you chose.
For Xiaomi TVs, it is recommended to set the value Automatically or YUV420, as this provides better compatibility with the panel and reduces the load on the data channel at high resolutions.
What is YUV420?
Optimizing the settings of the Xiaomi TV
Xiaomi TVs have a wide range of image processing functionality that can distort the image in games by default. To get the minimum input delay (Input Lag), you need to activate the game mode. Go to the settings of the TV via the remote, find the Image or Picture section.
In the list of modes of the image, select Game, which disables most post-processors such as motion smoothing and noise cancellation, which greatly speeds up the matrix response to player actions. Without this mode, the delay can be more than 100 ms, making shooters and fighting games almost unplayable.
You need to configure HDR settings. In the image menu, find the HDR Effect or HDR Tone Mapping settings. For Xiaomi, Video HDR or Game HDR mode is often optimal if available. Also make sure that HDMI 2.0 or Ultra HD Deep Color is enabled in the HDMI port settings (the name may vary depending on the version of MIUI TV).
You can use built-in profiles to calibrate colors. Movie or Standard often gives a warmer and more natural picture than Bright, which can fade colors. Experiment with Contrast and Brightness so that details are not lost in the shadows.
💡
The “Game” mode on Xiaomi TV is critical to reduce input delays by making the controls responsive and accurate.
Audio system and sound setup
Quality sound is just as important as image.The PlayStation 4 supports a variety of audio formats, including Dolby Digital and DTS. Xiaomi TVs are capable of decoding many of these formats, but for the best result, it is recommended to adjust the audio output correctly.
From PS4, go to Settings → Sound and Screen → Audio Settings. From Basic Output, select Bitstream if you have an external receiver or soundbar connected via an optical TV output. If the sound is coming through a TV or HDMI speaker, select Linear PCM for maximum compression-free quality.
If you use an external speaker system connected to a Xiaomi TV via an ARC port, make sure that the TV’s audio settings have External Speakers or ARC as the output. This will allow you to transmit multichannel audio from the console to your audio system.
- 🔊 Linear format PCM Provides the best quality, but requires support from the receiving device.
- 📡 Bitstream format transmits the original signal for decoding by an external device (receiver).
- 🎧 For headphones connected to the controller, the TV settings do not affect the sound.
- 🔌 Use it. HDMI cable ARC for connecting soundbars to the TV.
Addressing common problems
Even with the right connection, there can be technical difficulties, and one of the common problems is the lack of a signal or the message "No signal", which is often solved by rebooting both devices down the chain: turn off the TV and console, disconnect them from the network for 1 minute, then turn on the TV first and then the console.
Another problem is resolution mismatch. If the picture is cropped at the edges (the Overscan effect), go to the image settings of the Xiaomi TV and find the screen format or Aspect Ratio setting. Select the Just Scan, Screen Fit or Screen Fit value to see the entire desktop area of the console.
The table below will help quickly diagnose the main problems:
| Problem. | Possible cause | Decision |
|---|---|---|
| Black screen | Wrong signal source | Switch HDMI input to the TV remote |
| No sound. | Wrong audio format | Change to Linear PCM in PS4 settings |
| Low resolution. | Old HDMI cable | Replace the cable with High Speed HDMI 2.0 |
| Screen flickering | Poor contact or interference | Tighter insert cable, remove router from the console |
| No HDR. | HDMI 2.0 mode is disabled | Activate UHD Color in the TV port settings |
If neither solution worked, try resetting the video settings to the consoles. To do so, turn off the PS4 completely (not in standby mode), then press and hold the power button on the console body for about 7 seconds until you hear the second beep. The console will start in Safe Mode, where you can select Change Resolution and reset the video settings.