Modern gaming consoles like the Sony PlayStation 4 require high-quality image display to fully immerse themselves in gameplay. Owners of Xiaomi TVs and its sub-brands like Redmi and Poco often wonder about the correct connection of the console to the screen. The right setup allows you to unlock the potential HDR and high-frequency staffing.
The process of pairing devices does not require deep technical knowledge, but has its own nuances. Mi TV runs on the Android TV or PatchWall operating system, which provides wide compatibility with external signal sources. However, to achieve the minimum input delay, critical in shooters and fighting games, you need to perform a number of additional settings.
In this guide, we will look at everything from choosing a cable to calibrating an image, how to activate a special mode for games and what to do if the TV can not see the console, and the proper setting will ensure stable operation of the system without artifacts and lags.
Necessary components and equipment preparation
Before starting the procedure, make sure you have all the necessary equipment.The main connection element is an HDMI cable. The console usually comes with standard wire, but for PS4 Pro models, it is recommended to use HDMI 2.0 or higher to support 4K HDR.
You will also need a stable connection to the Internet, preferably through the LAN-port, although it is possible to use and Wi-Fi connection.The TV should be on and ready to go.Check availability of free ports on the back or side panel of the device.
- 🎮 Sony PlayStation 4 (Slim, Fat or Pro) and DualShock 4 controller.
- 🔌 Cable HDMI High quality (preferably with support) 4K).
- 📺 Xiaomi Mi TV TV portable HDMI.
- 🌐 Access to the Internet for system software updates.
Pay attention to the condition of the connectors. If the ports are clogged with dust, the signal quality can deteriorate, carefully blow the connections or use a soft brush to clean, which is a simple but important preventive measure.
⚠️ Note: Do not try to insert the cable HDMI Connectors are shaped, and improper connection can damage contacts on both the cable and the motherboard of the TV or console.
☑️ Checking before connection
Physical connection of the console to the TV
The process of physically connecting devices is as simple and linear as possible. Find HDMI ports on the back of your Xiaomi TV. For best compatibility with gaming features such as ALLM (Automatic Low Latency Mode), it is recommended to use a port labeled HDMI 2.0 or HDMI 3, if such marking is present in your model's instructions.
Connect one end of the cable to the HDMI OUT connector on the back of the PS4 console. Plug the second end into the selected port on the TV. Then plug the console into the power supply and press the switch on the device body or controller.
The TV must automatically identify the new source of the signal. The screen will display a source selection menu where you need to select the appropriate port, for example, HDMI 1 or HDMI 2. If the automatic switching did not occur, click the button with the image of the square and arrow on the Xiaomi remote and select the desired input manually.
💡
Use HDMI ports located closer to the center of the panel, they often have better screening from interference from other interfaces.
Once the PlayStation logo appears on the screen, you can go to the software setting, the system will determine the screen resolution, but for games, you need to make adjustments.
Setting up the image and activating the game mode
For a comfortable game, it is critical to minimize input delay (Input Lag). By default, Xiaomi TVs use various image enhancement algorithms, which increases response time. To fix this, you need to activate the Game mode.
Press the menu button on the remote control and go to the image settings. Find "Imaging Mode" or "Picture Mode." In the list of available options, select Game or Game. In this mode, you turn off extra post-processing, and the signal is transmitted with minimal latency.
Additionally, check your HDR settings. If you have a PS4 Pro model and an HDR10-enabled TV, make sure that the console settings in Settings → Sound and Screen → Video output settings activate HDR and Deep Color.
- 🖼️ Select Game mode in image settings to reduce delay.
- 🌈 Activate. HDR in the console video output settings if the screen supports this technology.
- 🔍 Turn off dynamic contrast and noise cancellation for a clearer picture.
- ⚙️ Install color space on Automatic or RGB Full for accurate color reproduction.
⚠️ Warning: In Game mode, the image may appear less bright or saturated than Bright or Standard mode, which is normal because the matrix response speed is prioritized over software color enhancement.
💡
The Game mode on Xiaomi TVs reduces the input latency to 10-15 ms, making the gameplay responsive and smooth.
Audio and video output configuration in PS4 system
Once you activate the game mode on your TV, make sure the console itself is giving the signal in the correct format. Go to the PS4 menu and select Settings. Next, go to Sound and Screen and select Video Output Settings.
It's important to set the right resolution here. For standard PS4 models, 1080p is optimal, and for the Pro version, 2160p (4K) if your Mi TV supports this resolution. Make sure you tick Automatic so that the console chooses the best format for itself.
| Parameter | Recommended value | Description |
|---|---|---|
| Permission | 1080p / 2160p | Depends on the TV and console model |
| RGB / YUV | Automatically. | Optimal choice of color reproduction |
| Dynamic range | Automatically. | Includes HDR with support |
| Deep Color Output | Automatically. | Expands the color scheme |
In the audio section, select the output format. If you have external acoustics connected via optical output or HDMI-ARC, select the appropriate format (e.g. Dolby Digital). If the sound is coming through the TV speakers, leave the default settings (LPCM).
What do you do if there's no sound?
Solving Common Connection Problems
Sometimes users are faced with a situation where the Xiaomi TV can not see the console or the image is missing. Often the problem lies in the “handshake” of HDCP devices. Try to completely turn off both devices by pulling the cords from the socket for 1-2 minutes, and then turn them on again.
Another common cause is a faulty HDMI cable. Even new cables can be factory defective. If the image appears, it disappears, or if the screen molds "snow" and artifacts, replace the cable with a known serviceable one. Also try to switch the wire to another HDMI port on the TV.
- 🔄 Perform a full power reset for the TV and console.
- 🔌 Replace the cable. HDMI Certified high-speed analogue.
- 📺 Switch to another port. HDMI, preferably.
- 🛠️ Check for firmware updates for Xiaomi TV.
If the problem persists, it may conflict with the screen resolution. Try to start the console in safe mode. To do this, turn off the PS4 completely, then press and hold the on button for about 7 seconds until you hear the second beep. From the menu, select the change in video resolution.
⚠️ Warning: If a “Not Supported” message appears on the screen or a black screen with sound running, this means that the console is trying to output a resolution or frame rate that is not supported by the current TV settings.
Use of additional Smart TV functions
Xiaomi Android TVs allow you to install apps directly. While the native PS4 Remote Play app for Android TV may not be in the Google Play store on your TV, you can use the streaming feature or third-party launchers.
It's important to note that voice control is possible. If the Mi Remote supports voice input, you can switch sources or adjust volume with voice commands without being distracted from the game, which adds to the convenience of using multimedia features.
Also worth mentioning is the CEC (Consumer Electronics Control) feature, which can be called differently on Xiaomi TVs. When activated, turning on the console automatically switches the TV to the desired HDMI input and wakes up the screen. Check the General or Connections section in your TV settings to activate HDMI control.
💡
The CEC function allows you to control the console and TV with one remote, automatically switching inputs and synchronizing the on/off devices.