How to connect NFC on Xiaomi Redmi Note 10 Pro: from chip check to Google Pay setup

The Xiaomi Redmi Note 10 Pro is one of the most popular mid-range smartphones, but many users still don’t know it supports NFC technology, a feature that allows contactless payments, sharing data with other devices, and even managing smart gadgets. However, by default, NFC can be disabled or hidden in settings — especially after MIUI updates.

In this article you will find a step-by-step activation instruction. NFC On the Redmi Note 10 Pro, including hardware support checks, setting up Google Pay and Mi Pay, and solving typical problems (such as when a smartphone can’t see bank cards or tags). NFC without restrictions, and what to do if the function suddenly disappeared after the update.

Important: the instruction is relevant for all modifications of the Redmi Note 10 Pro (including the global version) m1801d1g Chinese m1801d1t), However, some steps may vary depending on the region and version. MIUI (12, 13 or 14. If your smartphone does not respond NFC-Labels, first check if the chip is turned off at the firmware level - we will talk about this below.

1.Verify NFC support on Redmi Note 10 Pro

Before you set up NFC, make sure your Redmi Note 10 Pro is equipped with this module at all. Despite the official specifications, some batches of devices (especially for certain regions) could be released without a chip.

Method 1: through smartphone settings. Open Settings → Connections and Sharing → NFC. If there is no point, there is no chip physically. Method 2: use the AIDA64 application (System → Daves) - there should be a NXP PN54T module or similar.

• 🔍 Global version (m1801d1g): NFC It is present in 99% of cases.
• 🌏 Chinese version (m1801d1t): The chip is there, but can be blocked by the firmware.
• ⚠️ Indian/Russian assemblies: sometimes NFC Disabled at the software level (unlocking required).

Important: if AIDA64 map NFC-chip, but it's not in the settings -- the problem is the firmware. MIUI Up to the latest version or install custom software (e.g. Xiaomi.eu).

2. How to enable NFC in MIUI settings

If the chip is present, it can be activated in a few steps. The interface may vary slightly depending on the version of MIUI, but the general logic is maintained:

1. Open Settings (the gear icon on the main screen).
2. Go to Connections and Sharing (or Wireless Networks in older versions).
3. Slip on the item NFC – if it is not, use the search by settings (lamp at the top).
4. Activate the slider NFC and select the mode of operation: 💳 For payments (recommended for Google Pay). 📱 For data transfer (for file sharing via Android Beam). 🔄 Automatically (switches between modes).

After turning on in the top notification panel, an icon will appear NFC (If you don't have one, try rebooting your smartphone or resetting your network settings (Settings) → SIM-maps and mobile networks → Resetting network settings).

3. Contactless payments setup (Google Pay, Mi Pay)

The main application of NFC is contactless payments, and the Redmi Note 10 Pro supports two main services: Google Pay (for international cards) and Mi Pay (for Chinese banks).

Google Pay:

1. Download the Google Pay app from the Play Market.
2. Open it and click Start, then select Add Card.
3. Scan the card or enter the data manually. Visa, Mastercard, MIR (for Russian users) are supported.
4. Confirm the addition via SMS from the bank.
5. You can now pay by bringing your smartphone to the terminal (you don't have to unlock the screen).

Mi Pay: works only with Chinese banks (UnionPay, ICBC, etc.) Not suitable for Russian / European cards.

1. Install Mi Pay from the Mi App Store (or download APK).
2. Register with your phone number (Chinese number or VPN will be required).
3. Add the card and confirm via SMS.

⚠️ Note: If Google Pay does not accept your card, check if your bank supports tokenization (the list of supported banks is available on Google’s website). NFC (For example, Sberbank Online or Tinkoff).

4.Use of NFC for data transfer and tagging

In addition to payments, NFC on the Redmi Note 10 Pro can be used to:

• 📲 File transfers between smartphones (via Android Beam).
• 🏠 Management of smart devices (for example, NFC-light-marker).
• 🚗 Automation of tasks (for example, a tag in the machine to start the navigator).

How to transfer a file via NFC:

1. Turn on NFC on both devices.
2. Open the file (photo, contact, link) and select Share → Android Beam.
3. Bring the smartphones with the back sides to each other (the NFC antenna is located under the top of the case).
4. Wait for the beep - transmission is complete.

Work with NFC-Labels: Automating tasks will require an application like Trigger or NFC Tools. For example, to set up a tag to start Wi-Fi when touching:

1. Buy it. NFC-sticker (stands) ~100 rubles on AliExpress).
2. Open NFC Tools, select Write → Add Record → Wi-Fi.
3. Enter your network data (SSID, password).
4. Hold the smartphone to the sticker and wait for the recording.

💡

If NFC doesn’t work on tags, try wrapping the sticker with tape — sometimes the problem is poor contact with the smartphone’s antenna.

5. Problem Solving: NFC Not Working or Not Seeing the Card

If NFC is on but not functioning, the causes can range from software failures to hardware malfunctions.

• 🔄 Reboot your smartphone – sometimes a banal rebut helps.
• 📱 Check the firmware region: on the Chinese versions MIUI NFC It can be blocked (solution – firmware Xiaomi.eu).
• 🛠️ Reset the settings. NFC: Settings → Annexes → Application management → NFC → Warehouse → Clear the data.
• 📡 Google Pay: Older versions may not support new bank cards.
• 🔧 Check the antenna: if the smartphone fell, contacts NFC-The module may have moved (requires disassembly).

If the problem is firmware, try to roll back to the old version of MIUI or install custom software. For example, users note that MIUI 13.0.4 NFC worked steadily, and after upgrading to 14.0.2 began to glittle.

fastboot flash recovery recovery.img


fastboot reboot

⚠️ Note: if after the firmware NFC It stopped working at all, check the persist file in the section /vendor. Sometimes it's reset, and the chip goes off at the core level. persist.img original.

6. Alternative ways to use NFC on the Redmi Note 10 Pro

Few people know, but the NFC on the Redmi Note 10 Pro is not just for payments, but here are some non-obvious scenarios:

• 🎮 Connecting gamepads: some wireless joysticks (for example, 8BitDo) maintain connection through NFC.
• 🔑 Emulation of key cards: with the help of NFC Tools can record data from the intercom or pass on the smartphone (if the system is not protected by dynamic encryption).
• 📦 Quick setup of IoT devices: Many smart light bulbs (Yeelight, Xiaomi Mi Home) support add-on NFC.
• 🚇 Payment for fares: in some cities (Moscow, St. Petersburg) you can link Troika or Strelka to Google Pay.

Example: emulation of the intercom key

1. Download NFC Tools and Mifare Classic Tool.
2. Bring the original card to your smartphone and copy the data via Read.
3. Save the dump and write it down on an empty map or emulate it via the NFC Gateway (root rights required).

Important: emulating keys may be illegal if used to access other people's premises.

💡

The NFC on the Redmi Note 10 Pro supports all standard protocols (ISO 14443, ISO 15693), but some labels (such as Mifare Ultralight) may require root or special software to work with.

7. Frequent Questions (FAQ)