Modern users often face the need to integrate accessories of different ecosystems into a single work connection. Apple smartphone owners often choose budget and high-quality products. TWS-Headphones from Chinese manufacturers, such as Xiaomi. The process of synchronizing devices usually does not cause difficulties, but the iOS operating system has its own nuances that distinguish it from Android.
The correct initial setup ensures that the sound and microphone will work smoothly in the future. If you miss important steps, you may encounter channel desynchronization or rapid battery discharge. In this article, we will discuss in detail how to activate pairing mode on Xiaomi Airdots headphones and successfully complete the connection to your iPhone without typical errors.
Before you start, make sure your smartphone has a wireless module on, and it’s also worth checking the charge level of the case and headphones, as the discharged devices may not be determined by the phone.
Preparation of devices for the first pairing
The first stage requires attention, because this is where the most common problems occur, the headphones must be in a special connection standby mode, which is activated only under certain conditions, and simply removing them from the case is sometimes not enough if they have previously been connected to another device.
Make sure your Xiaomi Airdots are fully charged. To do this, place them in a charging case and connect the cable to the network for at least 15-20 minutes. The headphones should burn red while charging and fade or change color when fully charged. This is critical, since at low energy levels, the Bluetooth module can work unstable.
It is also important to clear the list of paired devices on your iPhone if you have previously tried to connect these headphones unsuccessfully: Go to the Bluetooth settings, find the list of old records about Airdots or Mi True Wireless EBs and click "Forget this device." This will avoid profile conflicts when you try again.
💡
Before setting up, be sure to wipe the contacts on the headphones and inside the case with dry cloth. The oxidation of the contacts can prevent charging, which will prevent the headphones from entering pairing mode.
Once you've done the preparatory steps, you can move to the immediate process of activating the search mode.
Step-by-step instructions for connecting to iOS
The algorithm for Apple appliance owners has its own specifics: Unlike Android, where a pop-up can appear automatically, iOS often requires manual search through the system menu.
Follow the following steps in strict sequence:
- 📱 Open your iPhone’s settings and go to the Bluetooth section, making sure the slider is activated.
- 🎧 Remove both earphones from the charge case at the same time. Don't leave them inside, pairing mode only activates outside the case.
- 👆 Press and hold the touch zones on both headphones during the 3-5 seconds until the indicators start flashing white quickly.
- 🔍 In the list of available devices on the smartphone screen, find a record of Xiaomi Airdots or Mi True Wireless EBs Basic_R and tap her.
Once the connection is successful, the voice assistant will inform you of the status, usually the phrase "Connected" in English. If you hear only one earpiece or the connection is constantly interrupted, put both earphones back in the case, close the lid for 10 seconds and repeat the procedure.
☑️ Checklist of successful connection
It's worth noting that the initial pairing is always done with the right earpiece, which acts as a master, and the left connects to the right one automatically, creating a stereo pair that the phone then sees.
Features of management and functionality on the iPhone
Once connected, users often find that the functionality works differently than on Android, due to the limitations of the iOS operating system, which does not allow third-party accessories to fully integrate into the system menu.
iPhone owners will not be able to see the exact percentage of charge of each headphone in the standard "Battery" widget, as it happens with the original AirPods. However, the charge level of the case and the common device can sometimes be displayed in the "Batteries" widget if the system correctly recognized the data protocol. For advanced information about the charge of each ear, it is better to use third-party applications from the App Store, such as MaterialPods or AndPods.
Playback and call control is done through touch zones, and the standard circuit is usually as follows:
- 🎵 Double touch: playback/pause of a track or call.
- 📞 Triple touch (right earphone): activation of voice assistant (Siri).
- 📞 Triple touch (left earphone): Deflection of incoming call.
- 🔇 Sensor retention: In some versions, the firmware is responsible for activating game mode or changing the tracklist.
Why isn't Siri working?
It is important to understand that the functionality of the buttons is hard sewn into the firmware of the headphones and does not change through the settings of the iPhone. You can not reassign actions to double or triple touch without using specialized applications-configurators that do not work with all versions of Airdots.
Solving Common Connection Problems
Even if you follow all the instructions, you can have technical difficulties, and the most common problem is that the phone sees the device but it doesn't connect, or only one headphone is connected, which indicates that the stereo pair is out of sync.
To fix the problem, you need to reset the headphones completely. Remove both earphones from the case. Press and hold the touchpads on both devices simultaneously for 15-20 seconds. The indicators should flash red several times, after which the headphones will turn off. Then place them in the case, close and re-extract them for re-pairing.
⚠️ Warning: Do not release your headphones immediately after the first blink during reset, wait for the characteristic double or triple red blink that signals a return to factory settings.
Another cause of problems may be the overcrowded memory of the iPhone's Bluetooth module. If there are too many stored gadgets on the device list, the system may ignore new connection requests. Try removing a few unused devices from the paired list.
It’s also worth checking out the iOS version. On very old versions of the operating system (below 12.0), there may be problems with audio codecs, leading to delays or poor audio stream quality.
Comparison of characteristics and version compatibility
Xiaomi Airdots’ lineup is quite extensive, and users often confuse versions. Generational differences affect sound quality, active noise cancellation and connection stability with Apple devices.
Below is a table that helps you identify your model and understand its features when working with your iPhone:
| Model | Bluetooth version | Codec | Features of iOS |
|---|---|---|---|
| Airdots Basic | 5.0 | SBC | Basic connection, no aptX |
| Airdots 2 / Redmi Airdots | 5.0 | SBC | Improved microphone, more stable communication |
| Airdots Pro / Redmi Buds | 5.0 | AAC, SBC | AAC support, better quality |
| Airdots 3 | 5.2 | AAC, SBC | Low latency, auto-connection |
Note that the iPhone supports AAC codec, which provides high audio quality. If your headphone model supports this codec (for example, Airdots Pro), the sound will be significantly cleaner and richer than when using the basic SBC codec.
When buying a used device or a new batch, it is important to check the firmware version, and sometimes devices with different regional software are found on the market, which can affect voice prompts (Chinese or English).
Optimization of work and care for accessory
To extend the service life of your TWS-It is recommended to observe simple rules of operation. Regular cleaning of the speaker mesh from earwax prevents attenuation of sound and protects the insides from moisture.
If you notice that the headphones quickly discharge or lose communication at a distance of more than 3 meters, try rebooting the iPhone itself. Sometimes the cache of Bluetooth services in iOS overflows, which affects the power consumption and stability of the radio module.
⚠️ Warning: Never leave your headphones and case in direct sunlight or in a car in the summer.Lithium polymer batteries are extremely sensitive to overheating, which can cause bloating and failure.
Use original or certified cables to charge your case. Cheap cables from markets can deliver unstable voltages, which can negatively affect the headphone power controller.
💡
Regularly cleaning contacts and updating firmware (via the Mi Buds app on Android) is key to the long life of your Xiaomi Airdots.