Modern wireless headsets have become an integral part of life, and the Xiaomi Mi True Wireless Earbuds Basic model has deservedly gained popularity due to its affordable price and decent sound quality. However, the process of initial tuning or re-pairing after a failure can cause difficulties for beginners, especially given the specifics of Bluetooth protocol in the budget segment. In this article, we will discuss how to properly connect, avoid typical errors and configure the device for comfortable listening to music or conversations.
It's important to understand that the algorithm of these headphones involves automatically connecting to each other immediately after extraction from the case, which creates a single audio stream for your smartphone. If you just purchased a gadget or faced a problem when only one channel is running, you will need to perform a number of sequential actions. We will consider not only the standard procedure, but also methods of forced synchronization, which are often ignored in official manuals, but are critical for stable operation.
To start, make sure your Mi True Wireless Earbuds Basic is fully charged, as low charge can prevent the phone from successfully finding the device.The pairing process takes only a few minutes, but requires attention to the status indicators located on the inside of each earphone.The correct sequence of actions ensures that you can enjoy stereo sound without delays and connection breaks.
Preparation of headphones and smartphone for pairing
Before you go to Bluetooth settings, you need to properly prepare the device itself. Often users make the mistake of starting a search immediately after unpacking, forgetting about the protective films on the charging contacts. Remove all insulation materials from the contacts on the headphones themselves and inside the charging case to ensure a full battery charge. The indicators should light up red when placed in the case and go out or change color when fully charged.
The next step is to check your mobile device's settings, make sure that the wireless module is activated and visible to other devices. In some cases, especially on MIUI-enclosed smartphones, geolocation is required, as modern versions of Android use GPS to more accurately identify nearby devices. Without this permission, the list of available gadgets may not display correctly or be empty.
Also, clear the list of previously connected devices if you have tried pairing before, but without success. Go to Bluetooth settings, search the list of Xiaomi Earbuds Basic and select the option “Forget device” or “Disable” to avoid profile conflicts and ensure a clean start to the connection procedure, then you can go to the direct start of the search mode.
⚠️ Warning: Don't remove both earbuds from the case at the same time until you're ready to sync. If you pull them out in advance, they may try to connect to each other in the background and go into sleep mode, making it harder for the phone to find them.
Step-by-step instructions for connecting to Android and iOS
The process of pairing with Android and iOS phones is almost identical, as it relies on standard data protocols. First place both headphones in the charging case, close the lid and wait for about 5-10 seconds. Then open the lid and remove both headphones at the same time - the indicators on them should start flashing quickly in white, which signals the transition to Pairing Mode mode.
Pick up your smartphone and go to the settings menu. Select the Bluetooth section and start scanning new devices. The list of available gadgets should appear Mi True Wireless EBs. Basic_R Or just Mi True Wireless EBs Basic. Notice that often only the right earpiece is displayed, as it is the master device that transmits the signal to the left.
☑️ Connection checklist
Once the connection is successful, the headphones should flash less or go out, and the phone's status bar will show a headset battery icon. If the system requests an access code confirmation, type 0000, although this model rarely requires this. Now you can play audio, and the sound must go through both channels.
- 📱 Make sure the distance between the phone and the headphones is less than 1 meter during initial pairing for signal stability.
- 🔋 Make sure the smartphone’s charge level is sufficient, as the energy-intensive search process can drain a weak battery.
- 🎧 When first enabled, you may need to update your firmware through the Mi Wear app to improve stability.
Management settings and additional functions
Once the basic connection is established, it makes sense to adjust the touch control for maximum comfort. By default, Xiaomi Mi True Wireless Earbuds Basic have pre-installed commands that can only be changed through third-party applications or memorized by the standard algorithm. Single touch sensor is usually responsible for playback or pause, and double touch is responsible for calling voice assistant or switching track, depending on the version of the firmware.
For a deeper setup, it is recommended to install the official Mi Wear or Xiaomi Earbuds app from the Google Play store or App Store. Through this software you can get the exact charge level of each headphone separately, which is impossible to do in the standard Bluetooth menu.
💡
Use the Mi Wear app to calibrate your sensors if the headphones respond to random touches or, conversely, ignore taps.
It is important to note that volume control on this model is often not brought to the default sensors, but in some versions of firmware, triple tap can adjust the sound level. Check the relevance of your firmware, as the manufacturer periodically releases updates that add new gestures or improve the quality of voice communication through noise cancellation of the environment.
| Action. | Right earpiece | Left earpiece | Both earphones. |
|---|---|---|---|
| Single touch | Answer/Complete the call | Activate the assistant. | Reproduction/Pause |
| Double touch. | Re-setting | Previous track | - |
| Triple touch. | Next track | - | - |
| Containment (2 seconds) | Reject the challenge | - | Shutdown |
The solution to the problem: only one headphone works
One of the most common problems that owners face is when sound comes from only one channel, usually the right channel, while the left one is silent, and this is due to the dissynchronization between the headphones themselves: they have forgotten each other and connected to the phone as two independent mono-device, and to fix this, you need to perform a complete reset and reconnect.
First, remove the device from the Bluetooth list on your phone ("Forget the device") and turn off Bluetooth on your smartphone. Place both headphones in the case, making sure they are charging (red light is on). Then pull them out and press the touchpads on both headphones simultaneously 5 times in a row (or hold 5-7 seconds, depending on the revision) until the indicators flash red. This is a signal to reset.
Why is the desynchronization happening?
Once reset, put your headphones back in your case, close it, open it, and re-start your phone search. Now they have to find each other again before connecting to your smartphone. If the problem persists, try connecting your headphones to another smartphone to rule out a malfunction of the phone's Bluetooth module.
⚠️ Note: When resetting, keep your headphones in your hands, not in the case, if the instruction requires multiple pressing. In the case, the sensors can lock or operate in charge mode, ignoring commands.
Resetting settings to factory parameters
If standard methods don't help, or you plan to sell a headset, a full Hard Reset may be required.This procedure returns all settings to factory status, erasing connection history and user preferences. For Basic models, the procedure is often performed through prolonged retention of touch panels outside the case.
Remove the headphones from the case. Press and hold the touch areas on both earphones for a period of time. 20-30 The lights will flash different colors, then they will go out and light up again in red, which means that the reset was successful, and then the headphones will automatically turn off.
There is an alternative method specific to some firmware versions: quickly tap the right earphone sensor 4 times and the left earphone sensor 5 times (or vice versa) until the indicators flash red. The exact combination can vary, so if one method didn't work, try the number of taps variations. The main thing is to get a red glow that confirms the reset.
- 🔄 After reset, be sure to remove the old device from the phone’s memory before connecting again.
- 🔌 Make sure the case is at least 30% charged so that the headphones do not discharge during the reset process.
- ⏳ Hold a 10 second pause between reset attempts if the first failed.
Frequent questions and troubleshooting
Even if you follow all the instructions, you may have specific questions about compatibility or technical features of the model. Users often wonder why the connection in your pocket is interrupted or how to improve the quality of the microphone. In this section, we will answer the most popular queries that will help to extend the life of your device.
The quality of communication depends on the position of the microphone on the headphone leg. Try not to cover the bottom of the headphone with your fingers during a conversation. It is also worth remembering that the Xiaomi Mi True Wireless Earbuds Basic uses the SBC codec, which is the standard for the budget segment, but can be inferior in detail to more expensive counterparts with aptX.
💡
Connection stability is directly dependent on the absence of physical obstacles between the phone and the headphones; carrying the phone in the back pocket can create a shielding signal by the body.
If you notice a strong crack or noise, check the speaker grid for earwax or dust, clean it carefully with a dry soft brush or cotton swab, without using liquids, and the cleanliness of the contact areas in the case is also critical for regular recharging and preventing deep discharge.