How to connect a mouse to a Xiaomi TV: all the ways USB Bluetooth

Connecting your computer mouse to your Xiaomi TV opens up new management options: easy navigation on the Android menu TV, Browser work, games, even office tasks, but not everyone knows that modern Mis are not the only things that people do. TV redmi TV This function is supported by, and not only through, USB, But also Bluetooth, via adapters or even over the network.

In this article, you will find 5 proven ways to connect your mouse (including wired, wireless and exotic options), a compatibility table of Xiaomi models, as well as solutions to typical problems - from lack of response to the device to cursor lags. MIUI TV Google TV, which are used in different lines of TVs of the brand.

If you want to turn your Xiaomi into a new one TV Read on for a near-full computer — or just tired of the touchpad remote — and we’ve taken a look at even the rare cases where standard methods don’t work (e.g., on older models without Bluetooth 5.0 or when locked). USB-port).

1. Ways to Connect Your Mouse to Xiaomi TV: comparison-table

Before you get to the instructions, determine which method is right for your TV model and mouse type. Below is a summary table with the pros and cons of each option.

If you have a Xiaomi model TV Released before 2019, check out the Android version TV in settings (Settings) → Outdated firmware (below 8.0) may not support Bluetooth mice or virtual input devices. USB-variants.

💡

On Xiaomi TVs with firmware MIUI TV (By 2020, the mouse may not be operating properly in the launcher, and the cursor will only be visible in applications.

Connecting wired USB-Mouse: step-by-step instructions

This is the easiest and most versatile way that works on all Xiaomi models. TV s USB-Port (even on budget Redmis) TV You will not need any additional settings – the system will automatically determine the input device.

What needs to be done:

• 🔌 Connect the mouse to the free one. USB-port on the TV (usually located on the side or back).
• ⚙️ Wait for the notice "USB-device connected" (appears in the upper right corner of the screen).
• 🖱️ Move the mouse – the cursor should appear on the screen in 2-5 seconds.

If the cursor does not appear:

1. Try another one. USB-port (on some models, only one port supports input devices).
2. Restart the TV with the mouse connected (Settings) → Reboot).
3. Check the mouse on another device (computer) – it may be faulty.

The mouse runs on a PC.|USB-TV port clean (no dust)|Port is used USB 2.0 (not blue) USB 3.0)|TV is not in energy saving mode-->

An important nuance for gaming mice: devices with high DPI (1600+) Can cause the “twitching” of the cursor on Xiaomi TV. To fix this, reduce it. DPI on mice using proprietary software (for example, Razer Synapse or Logitech G) HUB) up to 800-1000.

⚠️ Attention: On the TVs Xiaomi Mi TV 4A (2018) USB-ports are sometimes blocked after updating the firmware. If the mouse is not identified, reset the TV settings to the factory (Settings) → All settings → Reset).

3. Bluetooth mouse connection: pairing and setting

A wireless mouse over Bluetooth is ideal for those who don’t want to mess with wires. However, there are a few pitfalls here: not all Xiaomi models are perfect. TV Support this protocol, and the pairing process may vary depending on the Android version TV.

Instructions for Android TVs TV 9.0 and newer (e.g. Mi) TV Q1/Q2, Redmi Smart TV X):

1. Turn on the pairing mode on the mice (usually hold the switch on button for 3-5 seconds until the indicator flashes).
2. On the TV, go to Settings → Devices → Bluetooth.
3. Click "Add device" and select your mouse from the list.
4. Confirm pairing (if PIN is required, try 0000 or 1234).

For older models with MIUI TV (Like Mi. TV 4S 2019):

• 🔍 Go to Settings. → Network settings → Bluetooth.
• 🔄 If the mouse doesn’t show up, restart the TV and repeat the search.
• 🛠️ Some of the firmwares require first connecting the mouse to the USB, and then switch it to Bluetooth mode (see device instruction manual).

Compatible models of Bluetooth mice:

• 🖱️ Logitech MX Master 3 (works without lag on Android) TV 10+)
• 🖱️ Microsoft Bluetooth Mouse (requires a reboot after connecting)
• 🖱️ Xiaomi Mi Bluetooth Mouse (optimized for the ecosystem, but may not be defined on older TVs)
• 🖱️ Razer Basilisk X Hyperspeed (requires firmware TV at least 2021)

⚠️ Note: On Xiaomi TVs with Amlogic chipset S905 (Like Mi. TV 4A 32′′ Bluetooth can be turned off after sleep. To avoid re-pairing, turn off the power saving mode in the settings (Settings) → Energy conservation → Sleep regimen).

4. Connect a RF mouse (2.4 GHz) via USB-dongle

Mice with a radio frequency adapter (e.g., Logitech Unifying or HP X3000) Connect to Xiaomi TV as simple as wired, but they are USB-This is more stable than Bluetooth and is suitable for models without a built-in wireless module.

Step-by-step:

1. Insert a USB-dongle (small wireless adapter) into the TV port.
2. Turn on the mouse (if there is a switch) – it usually automatically syncs with the adapter.
3. If the cursor does not appear, press the pairing button on the dongle (if any) and reconnect.

Possible problems and solutions:

• 🔋 Adapter not defined: try another USB-port or connect through OTG-Hub (some TVs block "unknown" TVs" USB-device).
• 🖱️ The cursor moves in a snatch: interference from other wireless devices (routers, microwaves). Move the adapter away from the sources of interference.
• 🔄 Mouse shuts down after 5-10 minutes: turn off the power saving function USB in the service menu (see section "Additional settings").

Radiofrequency mice are ideal for gaming consoles (for example, if you plugged in Xiaomi). TV Xbox or PlayStation, because it provides minimal input delay. USB-port that may be needed for an external drive or keyboard.

💡

If you have a mouse with a Unifying adapter (like Logitech), you can connect up to 6 devices (keyboard) to a single dongle. + To do this, use Logitech Unifying Software on your PC.

5. Connecting the mouse through OTG-hub (for keyboard) + mouse)

If you need to connect to Xiaomi TV Simultaneously use the mouse and keyboard (for example, to work with Microsoft Office or game emulators), OTG-This device expands the possibilities. USB-port, allowing you to connect multiple peripherals.

What you need:

• ⚡ OTG-externally powered hub (recommended for stability).
• 🖱️ Mouse (wired or with 2.4 GHz adapter).
• ⌨️ Keyboard (optional).

Instructions:

1. Connect. OTG-hub USB-television-port.
2. If the hub is externally powered, connect it to the outlet.
3. Insert the mouse and keyboard into the hub ports.
4. Wait for the device to be determined (it can take up to 30 seconds).

Compatible OTG-hub TV:

⚠️ Attention: On the TVs Xiaomi Mi TV 5 Pro when connecting via OTG-The hub can be a conflict if you use an external drive at the same time, in which case you first connect the mouse / keyboard, and then the flash drive or the flash drive. HDD.

6. Virtual mouse via smartphone (Remote Mouse)

If you don’t have a physical mouse on hand, you can use your smartphone as a touchpad or air mouse, and you’ll need the Remote Mouse app (or the likes of Unified Remote, TeamViewer QuickSupport).

How to set up:

1. Install the Remote Mouse app on your smartphone (available for Android and iOS).
2. On Xiaomi TV, turn on the option "Debugging by" USB" (Settings → On TV. → Build Number – Press 7 times, then return to Settings → For developers → Debugging by USB).
3. Connect your smartphone and TV to a single Wi-Fi network.
4. Launch the app on your phone and select your Xiaomi TV device-list.

The advantages of a virtual mouse:

• 📱 No additional devices required – only a smartphone.
• 🎮 Supports gestures (such as swipe for scrolling).
• ⚙️ You can set additional buttons (volume, back).

Disadvantages:

• 📶 Depends on the stability of Wi-Fi (with a weak signal - lags).
• 🔋 Discharges the smartphone battery.
• 🖥️ Not all apps on the TV support touchpad control.

💡

For games on Xiaomi TV (For example, via Steam Link, the virtual mouse is not suitable due to high latency. DPI (1600+).

7. Additional settings and problem solving

If the mouse is connected but not working properly (for example, the cursor disappears or buttons do not respond), check the following settings:

Mouse pointer setting:

• Go to Settings. → Devices → Mouse pointer.
• Adjust the cursor speed and turn on the option "Show the cursor trail" (helps with lags).

2. Permission to use the mouse in applications:

• Some apps (such as Netflix or YouTube) block the cursor. To unlock, go to Settings. → Annexes → Special access → Interact with the mouse and enable permission for the desired application.

3. Resetting settings USB/Bluetooth:

• If the mouse previously connected but is now not working, reset the connection settings: → Devices → Resetting settings Bluetooth/USB.

Update of firmware:

• On older Xiaomi models TV (Until 2020, the mouse may not work due to firmware errors. → On TV. → Updating the system.

Frequent mistakes and their solutions:

8. FAQ: Frequent questions about connecting the mouse to Xiaomi TV