Peripherals from Chinese manufacturer Xiaomi, such as the Silent, Portable or Mi Wireless series mice, are stylish and affordable, but often require a careful approach to initial setup. Unlike more mainstream brands, where the plug-and-play process works perfectly 99% of the time, Xiaomi ecosystem products sometimes have to manually search for drivers or specific button combinations for activation. This is especially true for models using a radio channel and devices designed primarily for the Asian market.
In this article, we will discuss in detail how to properly connect the Xiaomi mouse to various devices, whether it is a desktop PC with Windows, a laptop on macOS or even a smartphone running Android. USB-Adapters, Bluetooth pairing, and typical problems when the cursor is not moving or is running with delays.
Before we get to the specific steps, it is important to understand that the method of connection depends on the type of interface that your model supports. Some versions only support a wired connection, others exclusively a radio channel through a hidden receiver, and top models can work in three modes at once: USB, Bluetooth and 2.4 GHz. Determining the type of connection is the first and critical step, without which further action may be useless.
Preparation of equipment and compatibility check
Before starting the connection procedure, you need to conduct a visual inspection of the device and make sure that all the necessary components are available. USB-a receiver that can be mounted on the bottom of the mouse or in a special compartment under the battery pack. If you use a wired version, make sure that the cable has no visible damage, clamps or oxidation marks on the connector contacts.
Particular attention should be paid to the power supply, since many problems with connection lie in the discharged batteries. For models running on batteries such as AA or AAA, it is recommended to use fresh batteries with high recoil current, avoiding mixing old and new elements. In devices with built-in Xiaomi battery, it is advisable to put the gadget on charge for at least 30-40 minutes before the first turn on, to eliminate the possibility of instantaneous disconnection during pairing.
⚠️ Note: Do not try to connect the device to ports USB 3.0 (blue) directly if you see interference with the wireless signal. 2.4 GHz frequency can conflict with high-speed ports, so in such cases it is better to use the radio. USB-hub or extension device for moving the receiver away from the computer.
It's also worth checking your computer's operating system in advance, although most Xiaomi mice are HID-Devices (Human Interface Device) and work at the basic level without additional programs, to activate advanced functionality, reassign buttons or configure DPI, You may need to install specialized software. Make sure your PC has internet access to download the necessary components if standard Windows drivers are not enough.
Connecting Xiaomi’s wired mouse to your computer
The easiest and most reliable way to use the manipulator is a wired connection that guarantees minimal input delay and no problems with discharging batteries. USB-The system automatically recognizes the new device and starts installing standard drivers, which usually takes no more than 10-15 seconds.
When you install the drivers in the lower right corner of the screen (in the notification area of Windows), a corresponding message may appear. If the cursor does not appear or does not respond to movements after you connect, try to switch the plug to another port, preferably located on the back of the system unit, where the motherboard contacts provide a more stable voltage.
For macOS users, the process is also as simple as possible: once the cable is connected, the system will immediately start working with the manipulator. However, it is worth noting that some specific functions, such as side buttons or a horizontal scroll wheel, can work incorrectly without installing proprietary utilities, if they are available for your model.
💡
If the wired mouse is working in jerks, try to turn off the energy saving scheme. USB-ports in Windows Device Manager so that the system does not turn off port power to save energy.
This should be taken into account when organizing the working space so that the cable does not create unnecessary resistance during sudden movements with the brush.
Configuring a wireless connection through USB-adapter
Wireless models operating through a radio channel 2.4 GHz, which allows for a lot of freedom of movement, but requires proper synchronization with the receiver. USB-The receiver from the battery compartment (if it is hidden there) and insert it into the battery compartment. USB-Then turn on the mouse by switching the switchboard. On/Off at the bottom panel in the position "Included».
If the indicator on the device is lit up, but the cursor is not moving, you may need to manually re-tether the device. For this, some Xiaomi models require simultaneous clamping of the left, right button and scroll wheel for 3-5 seconds, at which point the LED can start flashing, signaling the search mode (conjugation).
☑️ Verification of wireless connection
In the rare cases where the driver doesn't automatically install, you'll need a Device Manager. Press Win+X and select Device Manager. Find the "Mice and Other Pointing Devices" section. If you see a device with a yellow exclamation point, right-click on it and select "Update Driver" -> "Automatic Search."
⚠️ Attention: When in use USB-Make sure that the receiver extender is not longer than 1.5-2 meters. Too long cables without active signal amplification can lead to data loss and a "twitch" cursor.
Xiaomi mouse interface over Bluetooth
Modern models, such as Mi Portable Mouse or Mi Silent Mouse, often support Bluetooth protocol, allowing you to connect to devices without using the device. USB-To enter the pairing mode, you need to press a special connection button, which can be located on the bottom or combined with one of the main buttons. Hold it for about 3 seconds until the indicator flashes quickly in blue or white.
On a Windows 10 or 11 computer, go to Start menu -> Settings -> Devices -> Bluetooth and other devices. Make sure the Bluetooth slider is in the "On" position and click "Add Bluetooth or other device." Your mouse name should appear on the list of available devices, such as "Mi Mouse" or "Xiaomi Mouse."
Users of Android devices can also connect a mouse to improve text or navigation comfort. Activate Bluetooth on your smartphone, find the device in the list and click "Hide" and after successfully connecting, a cursor will appear on the phone screen that is controlled by mouse movements on the surface.
It’s worth noting that Bluetooth connectivity can be slightly higher than USB-adapter connectivity, which is important for dynamic gaming, but for office work and Internet surfing, the difference is almost imperceptible, and power consumption is often lower.
Installation of drivers and software
While basic features work immediately, it is recommended to install official software for full customization, and you can find it on the mi.com website or on specialized resources that support the Xiaomi ecosystem. The software allows you to change the sensitivity of the sensor (DPI), adjust the double-click speed and assign macros to additional buttons.
The installation process is standard: download the installer, run it, and follow the instructions on the screen. After installation, restart the computer. In some cases, the program may not see the mouse if it is connected via Bluetooth - try switching to the computer. USB-mode for initial profile setting.
For advanced users, the ability to flash the device through special utilities is available if the manufacturer has released a microcode update that corrects sensor errors or improves energy efficiency. However, firmware with third-party tools can permanently disable the device, so use only official releases.
Compatibility table and characteristics of interfaces
Below is a comparison table that will help you determine the capabilities of different connection interfaces for Xiaomi devices, which is especially useful when choosing how to connect for specific tasks, whether it is gaming or working with graphics.
| Parameter | USB wired | USB Adapter 2.4 GHz | Bluetooth |
|---|---|---|---|
| Delayed input (Latency) | Minimum (1 ms) | Low (2-4 ms) | Medium (8-15 ms) |
| Energy consumption | From the PC network | High. | Low. |
| Radio of action | Cable length (1.5 m) | Up to 10 meters. | Up to 10 meters. |
| Signal stability | Maximum | Tall. | Depends on the interference. |
💡
For games and accurate graphics work, always choose a wired connection or USB-adapter, as Bluetooth can cause noticeable delays in cursor movement.
Solving common problems and malfunctions
One of the common problems is when the mouse stops responding after downtime, and this is due to aggressive Windows energy saving settings. To fix this, go to Power» -> «Setup of power supply circuit» -> «Modify additional power parameters. In the branch "Settings" USB» -> «Temporary shutdown parameter USB-Select "Prohibit the Port».
If the cursor is moving in jerks or "shaking," check the surface you're working on. Xiaomi's optical and laser sensors can be bad at reading reflection on glossy, transparent or mirrored surfaces. Using a quality mouse mat often solves the problem instantly.
If you're completely out of order, try connecting the device to another computer. If the mouse isn't working there, it's probably hardware (a broken sensor, broken contact inside the case, or oxidized board) and if the other PC is running, it's your operating system settings or drivers that are at risk of conflict.
Secret combination for resetting
⚠️ Attention: If you are using USB-Hub (split), connect the receiver directly to the motherboard port. power shortage from the hub can lead to unstable operation of the wireless module.