How to Connect a Remote to a Xiaomi TV: All Ways (2026)

Connecting the remote to a Xiaomi TV seems like a simple task, but in practice users face unexpected difficulties, from lack of reaction to buttons to synchronization errors. Especially a problem for owners of Mi TV 4A/4S/5, Redmi Smart TV or Mi Box S consoles, where the pairing process can differ depending on the model of the remote and the firmware version. In this article, we will analyze all working methods – from standard binding of the original remote to setting up universal devices and fixing typical errors.

It is important to understand that the connection process depends not only on the model of the TV, but also on the type of remote: infrared (IR), Bluetooth or radio frequency (RF). For example, the remotes for the Mi TV 5 Pro often use a Bluetooth connection, while the budget models of Redmi TV can work through the infrared port. We will look at each case separately so you can determine exactly which method is suitable for your equipment.

1.Preparation for connection: what to check before starting

Before you start synchronizing, make sure that all conditions are met, which will save 90% of the problems during the setup phase.

Key points:

• 🔋 Battery charge: even if the indicator does not flash, replace the batteries with new ones (we recommend Duracell or Energizer alkaline batteries.
• 📺 Distance to TV: Keep the remote 1-3 meters away from the IR receiver (usually located on the right or bottom of the screen.
• 🔄 Reboot TV: Turn the TV off the socket for 30 seconds, then turn it back on.
• 📶 No interference: Remove infrared sources (incandescent lamps, sunlight) and turn off other Bluetooth devices (earphones, smartphones).

If you connect a universal remote (such as Xiaomi Mi Remote or third-party models), check its compatibility with your TV.

1. Find a TV model on the back (e.g. L55M6-6ARG for Redmi Smart TV X55).
2. Check it against the official Xiaomi compatibility list.

💡

If the TV doesn’t respond to the original remote after replacing the batteries, try pressing and holding the OK + Menu button at the same time for 10 seconds – this will reset the remote settings.

2. Standard connection of the original Xiaomi remote

Xiaomi’s original remotes (such as those for the Mi TV 4/5 or Mi Box series) are usually synced automatically when first turned on. If this does not happen or the remote has been reset, manually anchor.

For Mi TV and Redmi TV (Bluetooth/IR):

1. Turn on the TV with the power button on the body.
2. Press and hold the Back + Home buttons on the remote at the same time for 5-7 seconds until the indicator flashes.
3. Bring the remote to the TV at a distance of 10-20 cm and wait for an audible signal or message on the screen "Remote connected".

For the Mi Box S:

1. Connect the console to the TV and turn it on.
2. Press and hold Menu + OK on the remote for 10 seconds until the indicator flashes red.
3. Wait for the automatic connection (on the screen will appear a notification).

If the remote is not synchronized, try an alternative method:

Settings → Bluetooth and devices → Add accessory → Select the remote from the list

Remote responds to pressing (check the volume button)

The indicator on the remote stopped blinking

On the screen appeared a notification "Device connected"

The TV comes out of sleep at the press of any button-->

3. Connecting the universal remote to Xiaomi TV

Universal remotes (such as Xiaomi Mi Remote Controller or models from Philips, Samsung) require manual adjustment.

Method 1: Automatic code search

1. Turn on the TV with a button on the body.
2. On the universal remote, press and hold the Setup (or Set) until the indicator lights up constantly.
3. Enter the code 0000 (common code for Xiaomi) or 1147 (for Mi TV 4A).
4. Point the remote to the TV and press Power. If the TV is off, the code fits.

Method 2: Manual code entry

If the automatic search does not work, use the codes from the table:

If none of the code worked, try learning the remote:

1. Place the original and universal remotes "face to face" at a distance of 2-3 cm.
2. On the universal remote, hold Learn (or Magic), then press the button you want to program (for example, Volume+).
3. Press the same button on the original remote. Repeat for all the keys you need.

Original (from the set)

The universal (Xiaomi Mi Remote)

Universal (another brand)

The Mi Box with a separate console

Another option-->

4. Problem Solving: The remote does not connect or does not work correctly

If the TV doesn't respond to the remote, the reasons can be hardware (a remote or IR receiver malfunction) or software (a firmware failure).

Problem 1: The remote is not synchronized

• ⚡ Reset remote: Remove the batteries, press all buttons in turn (to discharge the capacitors), then insert the batteries back and reconnect.
• 🔄 Update TV firmware: go to Settings → On TV. → Update the system and install the latest version of the software.
• 📡 IR port check: point your smartphone camera at the remote's IR transmitter and press any button. If you see purple flicker on your phone screen, the remote is in good working order.

Problem 2: The remote works only with a part of the buttons

This is typical for universal remotes, where not all functions are supported.

• 🔧 Reprogram the remote with another code from the table above.
• 🖥️ Use a remote app (e.g. Mi Remote for the Android/iOS) temporary substitute.
• 🔄 Reset the TV settings to factory settings (Settings) → System system → Reset), but note that it will remove all installed applications.

⚠️ Warning: If the remote stopped working after resetting the TV, do not try to reconnect it through the menu - this may block the IR port. Instead, turn the TV off the outlet for 5 minutes, then repeat the standard synchronization procedure.

5. Connect the remote via the Mi Remote app

If the physical remote is lost or broken, it can be replaced with a smartphone.The Mi Remote app (available for Android and iOS) supports most Xiaomi TV and Mi Box models.

Instructions for setting:

1. Download Mi Remote (Android) or Mi Remote (iOS)
2. Connect your smartphone and TV to the same Wi-Fi network.
3. Launch the app, select Add Device → Television → Xiaomi.
4. Follow the instructions on the screen for synchronization (entry may be required) PIN-TV-code).

Advantages of this method:

• 📱 No need for a physical remote – control via smartphone.
• 🎮 Support for gestures and voice control (in new versions of the application).
• 🔄 Automatic update of the code base for new TV models.

Disadvantages:

• 🔋 Quick discharge of the smartphone battery with constant use.
• 📶 Dependence on stable Wi-Fi (when the communication breaks, the management disappears).

💡

Mi Remote can manage not only Xiaomi TVs, but also other brands (Samsung, LG, Sony) – for this, select the appropriate brand in the menu add the device.

6. Features of connecting the remote to the Mi Box S and other consoles

The Mi Box S, Mi Box 4 and Mi Stick use separate Bluetooth remotes, which are different from the way they sync with TVs.

Method 1: Standard connection

1. Connect the set-top box to the TV via HDMI and turn it on.
2. Insert the batteries into the remote (if new) or retrieve/paste them back (if the remote has already been used).
3. Press and hold Menu + OK for 10 seconds until the indicator starts flashing.
4. Wait for the automatic connection (the message "Conjugated" will appear on the screen).

Method 2: Manual addition through settings

If the automatic synchronization does not work:

1. Go to Mi Box Settings → Devices → Bluetooth.
2. Select "Add device" and hold Back + Home on the remote.
3. In the list, search for “Mi Remote Controller” and confirm the connection.

The Mi Box S (2nd generation) and Mi Stick are also available via voice commands (Google Assistant button on the remote).

Settings → Voice Search → Enable Google Assistant

⚠️ Warning: If after updating the firmware Mi Box remote stopped working, reset the console to factory settings (Settings) → The device → Reset. This will delete all data, but restore compatibility with the remote.

7. Alternative ways to control Xiaomi TV

If standard methods have not worked, consider alternative management options:

Voice control

Mi TV 5 and later supports the built-in voice assistant (Mic button on the remote or in the Mi Remote app).

• 🎤 Press and hold the microphone button on the remote.
• 🗣️ Say a command (e.g., “Turn on Netflix” or “Turn up the volume").

2.Management through HDMI-CEC

HDMI-CEC allows you to control your TV through a remote from connected devices (such as an Xbox or Soundbar) to enable:

Settings → HDMI-CEC → Enable

3. Connecting the keyboard or mouse

You can connect a wireless keyboard or mouse (such as the Xiaomi Mi Wireless Mouse) to the USB TV port.

• 🖱️ Navigating on Android TV.
• 🎮 Games via Google Play Games.
• ⌨️ Quickly enter text (for example, on YouTube).

💡

If you don’t have the original remote, but you have an IR port smartphone (such as the Xiaomi Mi 10 or Redmi Note 9), use it as a remote via the Mi Remote app.

FAQ: Frequent questions about connecting the remote to Xiaomi TV