How to connect the joystick from PS4 Xiaomi TV: all ways and solutions to problems

Connecting the DualShock gamepad 4 PlayStation 4 Xiaomi is opening up new possibilities for big-screen gaming, you can play retro console emulators, you can run cloud services like GeForce. NOW Xbox Cloud Gaming and some Smart apps TV. However, not all users know that modern Xiaomi TVs (series Mi). TV 4S, Mi TV Q1/Q2, Redmi Smart TV Others) support external controllers, but with nuances.

In this article, we will analyze all working ways of connecting: via Bluetooth, through USB-We will also focus on common mistakes (for example, when the TV "can't see" joystick) and give recommendations for setting up for maximum comfort. TV with a gamepad - this guide will help to avoid common problems.

What Xiaomi TVs support joystick connection PS4

Not all Xiaomi Smart models TV DualShock 4 is compatible with the basic criteria:

• 📺 Operating System: The TV must run on Android TV (version 9.0 and higher or Google TV. Outdated PatchWall models without Android may not support gamepads.
• 🔄 Bluetooth: Availability of Bluetooth 4.0 module+ (Check the model's specifications. Without it, you can only connect by using the same system. USB.
• 🎮 Support HID-Devices: The TV must recognize gamepads as Human Interface Device (standard for peripherals).

The table below shows the proven Xiaomi models that are compatible with DualShock 4:

⚠️ Note: If your TV is released before 2019 and runs on PatchWall without Android, you won’t be able to connect DualShock 4 via Bluetooth. USB-OTG Adapter (more on this below).

Joystick preparation PS4 plug-in

Before you connect the gamepad to the TV, it needs to be reset properly and put into pairing mode, which is especially important if the controller has previously been connected to the PlayStation 4 or another device.

Follow the following steps:

1. Turn off the joystick by holding the button PS (PlayStation logo: 10 seconds until the indicator goes out.
2. Connect the gamepad to charge for 5-10 minutes (even if the battery is charged).
3. To reset settings, press and hold the Share button (button to the left of the touchpad) + button PS In 5 seconds, the indicator should flash white.
4. Transfer the gamepad to pairing mode: hold PS + Share until the LED flashes white quickly.

💡

If the indicator on the joystick flashes orange, it means that the gamepad is discharged. Charge it before connecting, otherwise the TV may not detect the device.

Also check:

• 🔋 Battery level (optimally above 50%).
• 🎛️ Status. USB-port on a joystick (if you plan to connect by cable).
• 🔄 Lack of connection to other devices (PC, smartphone, other console).

Method 1: Connecting a joystick PS4 Xiaomi TV Bluetooth

It's the most convenient and common method, but it doesn't work on all models. It's the right one for Android TVs. TV 9.0+ Google TV.

Connection steps:

1. Turn on Bluetooth on your TV: Open Settings → Devices → Bluetooth. Activate the Bluetooth slider.

Put the joystick into pairing mode (as described in the previous section).

Add the device

Wireless Controller

DualShock 4

blue

Joystick appears in the list of connected devices|

The indicator on the gamepad burns blue|

The buttons on the joystick react in the TV menu|

In the settings appeared the section "Gamepad"-->

⚠️ Note: Some Xiaomi models (e.g. Mi) TV 4A) Bluetooth can work unstable with gamepads. If the joystick connects but shuts down after 10 to 20 seconds, try updating the TV firmware or use it. USB-connection.

Method 2: Connecting through USB-cable OTG-adapter

If Bluetooth is not working or your TV is not supporting it, you can connect DualShock 4 over a cable.

• 🔌 Original. USB-cable PS4 (or qualitative analogue with data transmission support).
• 🔗 OTG-Adapter (if the TV only has USB-Type C, like Xiaomi) TV A Pro).

Instructions:

1. Connect the cable to the joystick and TV (or through the OTG-adapter).
2. The TV must automatically recognize the gamepad as HID-device.
3. Check the buttons in the menu or in the game.

Important: When connecting to USB The joystick will consume energy from the TV, which can cause the gamepad battery to run out. To avoid this, use a Y-shaped cable (couples and transmits data simultaneously).

Advantages USB-connection:

• ⚡ Low input delay (important for dynamic games).
• 🔄 Stability (no problem with shutdown, like Bluetooth).
• 🎯 Full support for all gamepad functions (vibration, touchpad, gyroscope).

💡

USB-Connectivity is the best choice for cloud gaming (GeForce) NOW, Xbox Cloud, where minimal latency is important.

Method 3: Using third-party management applications

If the standard methods don’t work, you can use specialized apps from Google Play (available on Android). TV). They allow it:

• 🎮 Emulate the connection of the gamepad if the TV does not recognize it.
• 🔧 Set buttons for specific games.
• 🖥️ Use a joystick to control Smart TV (remote).

Top.-3 apps TV:

How to install and configure:

1. Open Google Play on your TV.
2. Find one of the applications by name or package name (see table).
3. Install and launch the application.
4. Follow the instructions on the screen to pair the joystick.

⚠️ Note: Some apps (such as Octopus) require root rights that are not available on Xiaomi. TV. Before installing, check user reviews with your TV model.

Joystick setting PS4 for games and applications on Xiaomi TV

Once successfully connected, the gamepad may not work correctly: for example, the buttons are assigned differently from the game, or the vibration does not work.

Basic setup in Android TV:

1. Open the Settings. → Devices → gamepads.
2. Select DualShock 4 from the list.
3. Adjust: Stick sensitivity, vibration intensity, button assignment (if supported).

For cloud services (GeForce) NOW, Xbox Cloud):

• 🎮 In GeForce. NOW The gamepad is automatically determined. If the buttons are not working correctly, reset the settings in the application.
• 🖥️ Xbox Cloud Gaming may require you to manually select the controller type (Settings) → Controller → DualShock 4).

For emulators (RetroArch, PPSSPP):

1. Open the emulator settings.
2. Go to the Input section → Controller Settings.
3. Select DualShock 4 and assign the buttons according to the scheme.

💡

In RetroArch, you can save the button configuration to a file and upload it for different games, saving time when switching between projects.

Solving common problems

Even after a successful connection, there can be difficulties.

Additional advice:

• 🔄 If the joystick is glitching, try resetting it (reset button on the back, next to the USB-port).
• 📱 Check if the gamepad is connected to another device at the same time (for example, to a smartphone).
• 🔌 Use quality. USB-cable – cheap analogues may not transmit data correctly.

FAQ: Frequent questions about connecting a joystick PS4 Xiaomi TV