How to connect another remote to the TV Xiaomi Mi TV: universal to brand

Why Xiaomi Mi TV is a TV TV Can't see the new remote and what to do about it

You bought a universal remote to replace the lost original or want to use a remote from another TV with Xiaomi Mi TV? The problem is that most of the TVs in this series are the Mi models. TV 4A, Mi TV 4S mi TV 5 Pro – working on Android TV This means that simply replacing batteries or pressing the Pair button often doesn't work.

In this article, we will analyze 5 working ways of connecting:

• 🔄 Original Xiaomi remote (if lost or dropped)
• 📺 Universal remotes (e.g. One for All, Huayu)
• 🎮 Gaming controllers (as an alternative to basic functions)
• 📱 Smartphone as a remote (via Mi Remote or Google) TV)
• 🔧 Manual Code Programming for Compatibility

Before you start, check:

• ⚡ Batteries in the remote (even new ones can be discharged)
• 📡 Distance to TV (maximum 8 meters without obstacles)
• 🔍 Visibility of the IR transmitter (not covered by hand or film)

Method 1: Connect the original Xiaomi remote (if it doesn’t work)

If your native Xiaomi remote has stopped responding but is physically healthy (not dropped in the water, not broken), the problem is most often resetting sync. This occurs after updating the firmware or resetting the TV to factory settings.

To reconnect it:

1. Turn on the TV with the power button on the case (if the remote does not respond).
2. Press and hold the Menu buttons. + OK on the remote simultaneously for 10 seconds until the indicator blinks twice.
3. Bring the remote to a distance of 10-15 cm to the IR receiver of the TV (usually located on the right or bottom of the screen).
4. Press any button (such as Volume)+). If the indicator on the remote flashes once - synchronization was successful.

Turn on the TV with a button on the body

Check the batteries in the remote.

Make sure there are no obstacles between the remote and the IR receiver

Bring the remote to a distance of 10-15 cm to the TV-->

If the remote is not synchronized:

• 🔋 Try replacing your batteries with new ones (even if they seem to work).
• 🔍 Check the IR transmitter of the remote through the camera of the smartphone: when you press the button, purple light should be visible.
• 📦 If the remote is new, it may be for another Mi model. TV (Like Mi. TV A2 Not compatible with the Mi remotes TV 4X).

⚠️ Note: On some models (e.g. Mi) TV Q1) Resetting the remote requires clamping back + Home instead of Menu + OK. See the exact combination in the instructions for the TV.

Method 2: Configure the Universal Remote (One For All, Huayu, BBK)

Universal remotes support Xiaomi Mi TV, But they require manual code entry or automatic search. Most models (e.g. One For All) URC 7940) are IR-protocol, so suitable for basic functions: on, volume control, channel switching.

Instructions for setting:

1. Turn on the TV with a button on the body.
2. On the universal remote, press and hold the Setup (or Set) until the indicator lights up constantly.
3. Enter. 4- or 5-code for Xiaomi (see table below). If the code is unknown, use autosearch (click on the code). 9-9-1 or 9-9-0 And wait for the TV to react).
4. Once you've entered it, the indicator will go out.+ power.

If the search engine didn't work:

• 🔄 Try out codes for Philips or Sharp TVs – they’re often compatible with Xiaomi.
• 📄 Check the manual for the universal remote: some models (e.g. Huayu) HY-608) Requires double pressing of the Setup button to activate programming mode.
• 🔧 If the remote supports learning (learning mode), "copy" signals from the original Xiaomi remote.

💡

If the universal remote controls only basic functions (on, volume) but does not open Settings or Mi Home, try connecting it via the HDMI-CEC. To do this, activate the control option on the TV menu. HDMI (Settings → System system → HDMI-CEC).

Method 3: Using a Smartphone as a Remote (Google) TV)

If you do not have a physical remote, you can control the Xiaomi Mi TV This is the official Mi Remote app (for the first time). Xiaomi/Redmi/POCO) Google TV (The main condition is that the TV and the phone must be connected to the same Wi-Fi network.

The following steps are taken for Mi Remote:

1. Download Mi Remote (Android) or Mi Remote Controller (iOS)
2. Launch the app and select Add Device → TV → Xiaomi.
3. Follow the instructions on the screen: the app will automatically find the TV on the local network.
4. If the search fails, enter IP-Television address manually (you can find it in Settings) → Network → State of the network).

For Google. TV (pre-Android TV Remote):

1. Install the Google app TV.
2. Select your TV from the list of devices (should be displayed automatically).
3. Confirm the connection on the TV screen (the pairing code will appear).

⚠️ Attention: On Mi TVs TV Firmware older than 2021 may not work management through Google TV constraint MIUI for TV. In this case, use only Mi Remote.

Advantages of managing from a smartphone:

• 🎛️ Full access to all features, including Settings and Mi Home.
• 🔍 The ability to use voice search (via Google Assistant).
• 📱 No need to buy a new remote control – just a phone.

Method 4: Connecting a remote from another TV (Samsung, LG, Sony)

Can I use the Samsung remote, LG Or Sony to manage Xiaomi Mi TV? Technically yes, but with reservations:

• ✅ Only basic functions work (on, volume, channel switching).
• ❌ Not available: Mi Home, Settings, Voice Search.
• 🔧 Requires manual code customization or remote learning.

Instructions for Samsung remotes (on the example of the model) BN59-01260A):

1. Turn on the Xiaomi TV with a button on the case.
2. On the Samsung remote, press. TV Power + Volume+ 3 seconds until the indicator lights up.
3. Enter the code. 0171 (for Mi TV 4A/4S) or 0195 (for Mi TV 5 Pro).
4. Check the buttons. If it doesn't work, try codes 0039, 0180.

For remotes. LG (series AKB759):

1. Hold the Settings (or Setup) for 5 seconds.
2. Enter code 10171 (for Xiaomi) or 11758 (universal).
3. If the code does not fit, use the training mode: bring the original Xiaomi remote to the remote control LG and press Learn, then alternately press the buttons to copy the signals.

Limitations of this method:

• 🎯 Control accuracy is lower than that of the original remote (may require several taps).
• 🔊 Not all buttons will work (like Netflix or Prime Video).
• 🔄 When updating the TV firmware, you may need to re-configure.

💡

Remotes from other brands (Samsung, LG, Sony can be connected to Xiaomi Mi TV For full control, you will need an original or universal remote with protocol support. NEC/RC5.

Method 5: Manual code programming for compatibility

If none of the standard codes fit, you can manually program the universal remote for Xiaomi Mi. TV. This method requires patience, but it gives the best compatibility.

Algorithm for remote control with learning function (Learning Mode):

1. Take the original Xiaomi remote (or working universal).
2. On the target remote, press and hold Learn (or Magic) until the indicator starts flashing.
3. Bring the original remote to the target at a distance of 1-2 cm (IR transmitters should "look" at each other).
4. On the original remote, press a button (such as Power), then on the target remote, press any button (such as 1) to save the signal.
5. Repeat for all the buttons required (Volume)+, Volume-, Channel+ etc.).

For remotes without training (codes only):

1. Find a complete list of codes for your remote model (for example, on the manufacturer’s website or forums like this). 4PDA).
2. Try the codes for Philips TVs, TCL Hisense – They are often compatible with Xiaomi.
3. If the code doesn’t work, try inverting the last digit (for example, enter 0172) instead of 0171.

Critical information: On TV Xiaomi Mi TV A2 And then, in 2022 and later, you have an updated control protocol, and if your universal remote is released before 2021, it may not support those models even after manual programming.

Frequent problems and their solutions

Even after a successful remote connection, there may be failures, and let's look at typical situations and ways to fix them.

Additional advice:

• 🔄 If the TV does not respond to the remote, but turns on from a button on the case, check the settings of the IR port in Settings → Devices → DU remote.
• 📡 For models with Bluetooth remotes (for example, Mi). TV Q1E) Separate synchronization is required through the settings → Bluetooth.
• 🔧 If nothing helps, reset your TV to factory settings (but remember, this will remove all installed apps and settings).

FAQ: Answers to popular questions