Modern peripherals from the Chinese giant Xiaomi are famous for their minimalist design and affordable price, but their initial configuration on the Microsoft operating system sometimes causes difficulties for users. USB-The receiver, Bluetooth mouse requires pairing through the built-in wireless communication module, which implies a certain sequence of actions for successful initialization. If you’ve just unpacked your new gadget, like the popular Mi Portable Mouse or Mi Silent Mouse, you’ll need to prepare your laptop for detection mode.
Windows 10 has a fairly advanced communication protocol stack, but automatic recognition of new devices is not always smooth, especially if it comes to specific HID profiles from little-known manufacturers. Before starting the procedure, make sure that the battery of the device is enough charge, since in pairing mode power consumption can increase briefly. It is also critical that your laptop is active Bluetooth module and installed current drivers, which is often overlooked when you first set up the system.
In this guide, we will take a detailed look at the entire connection process, from battery extraction to deep sensitivity tuning through specialized software. We will look not only at the standard scenario, but also at possible errors faced by owners of Xiaomi equipment. Proper tuning will allow you to unlock the full potential of ergonomics and functionality of your new accessory.
Preparation of the device and compatibility check
The first step before trying to pair is to physically prepare the manipulator. Most Xiaomi wireless mice come with a protective insulation film on the battery contact that needs to be removed. Usually the power compartment is located on the bottom of the device and is closed with a magnetic cover or sliding panel. Inside you will find an AA-format power supply or built-in battery, depending on the particular model.
After installing the battery or connecting the charging cable, pay attention to the status indicator. On many models, such as the Mi Dual Mode Wireless Mouse Silent Edition, the LED can flash blue or green, signaling readiness for operation. If the indicator does not light up, check the polarity of the battery installation or try to replace it with a known serviceable one, as the complete cells are sometimes discharged to zero after long storage in stock.
⚠️ Warning: Do not leave your mouse on for long periods of time unless it is connected to a computer.This can cause a deep battery discharge, especially in models with built-in battery life, which will shorten its lifespan.
It is also important to make sure that your laptop is technically capable of maintaining a connection. Windows Device Manager must not have a yellow exclamation marka next to the Bluetooth adapter. If the drivers are outdated, the system may not see the device at all, or the connection will be permanently interrupted. To check, you can open the command line and enter the command devmgmt.msc to go to the appropriate hardware management window.
💡
If you have a desktop PC without a built-in module, use USB-Bluetooth adapter version 4.0 or higher for stable operation of the mouse Xiaomi.
Activation of the pairing mode on the mouse Xiaomi
The key to this process is to put the manipulator in visibility mode for external devices. Unlike some other brands, where it is easy to turn on the switch, Xiaomi’s technique often requires additional actions. On the bottom of the device, next to the scroll wheel or at the bottom of the case, there is a special mode switching button or Connect pairing button.
To activate the search mode, you must press and hold this button during the 3-5 The indicator on the body should start flashing quickly, usually in blue, which means activating the detection protocol. If you're using a model with a Dual Mode switch, make sure the lever switches to Bluetooth position instead of mode. 2.4 GHz (which requires) USB-whistle).
- 🔵 Press and hold the connection button until the indicator flashes quickly.
- 🔋 Make sure the indicator is constantly on or flashing, confirming the presence of power.
- 📶 Switch the mode to Bluetooth position if there is a corresponding switcher.
Some users are faced with a situation where the mouse does not enter the pairing mode the first time. In this case, try to turn off the device with the switcher. On/Off, Wait a few seconds and repeat the procedure of clamping the connection button. 30-50 centimeters from the laptop during this procedure to eliminate problems with the signal radius.
☑️ Testing the mouse's readiness
Setting up Bluetooth in Windows 10
Before you search for a new device, make sure that the wireless module in Windows 10 is activated and configured correctly. Open the Start menu and go to the Settings section (the gear icon), then select the Device category. In the left column, make sure that you select Bluetooth and other devices.
At the top of the window, there should be a switch that puts the module in the "On" state. If the switch is missing, this may indicate the absence of drivers or a hardware malfunction of the adapter, in which case it is recommended to visit the laptop manufacturer's website and download the current software for chipset and wireless modules.
To add a new gadget, click on the large Add Bluetooth or other device button, which is located at the top of the list of devices already known to the system. In the window that opens, select the first item - "Bluetooth", designed for mice, keyboards, feathers and audio devices.
⚠️ If there are many identical names or devices named “Unknown” in the list of detected devices, close the window and try to bring the mouse closer to the receiver to filter out extra signals from neighbors.
The operating system can request confirmation of action via a pop-up notification in the lower right corner of the screen. Sometimes you need to press the Yes button or enter a pin code, although this is extremely rare for input devices such as the Xiaomi Mouse. the identification process takes 5 to 15 seconds depending on the load of the radio channel.
Connection process and driver installation
When the laptop detects the device, the name that matches your model will appear in the list, for example, Mi Portable Mouse or simply Mouse. Click on this name with the left mouse button (using a touchpad or already connected wired mouse). The status of the device name will change to "Pair...", and then to "Device ready for use."
Windows 10 has a vast database of standard HID drivers (Human Interface Device), so in 95% of cases additional software installation is not required. The system automatically selects the necessary profile for the cursor, wheel and main buttons.
If the cursor moves in jerks or disappears after you connect, the drivers may conflict, in which case open Device Manager, find your model in the Mice and Other Pointing Devices section, right-click and select Delete Device. Once you restart, Windows will try to install the driver again, which often resolves software errors.
| Mouse model | Type of connection | Do you need a driver? | Feature |
|---|---|---|---|
| Mi Portable Mouse | Bluetooth 4.0 | No (standard) | Aluminum case |
| Mi Silent Mouse | Bluetooth 4.0/2.4 GHz | No. | Silent clicks |
| Mi Dual Mode | Bluetooth 4.0/2.4 GHz | To adjust the buttons | Two modes of operation |
| Game Mouse | Wired/BT | Yes (for macros) | High DPI |
💡
Automatic installation of Windows 10 drivers works stably for basic functions, but you need proprietary software to configure DPI and reassign buttons.
Installation and configuration of Xiaomi Mouse Utility
While the basic features work right away, to take full advantage of Xiaomi’s mouse capabilities, such as changing the cursor speed (DPI) or reassigning side buttons, it is recommended to install the Xiaomi Mouse Utility utility.This software product is not always available in the official Microsoft Store, so it often has to be downloaded from third-party verified resources or the manufacturer’s website.
Once you install and run the program, the interface will suggest you select the connected device, and in the settings window you can see the current battery level, which is a very useful feature for planning replacement batteries. DPI adjusting slider allows you to change the sensitivity of the sensor, which is especially important for users with high-resolution 4K monitors.
- 🖱️ Reassign buttons: Configure side buttons for Copy or Insert functions».
- ⚡ Survey speed: change the port survey frequency for smoother cursor movement.
- 🔋 Monitor: Track the charge level in real time right in the Windows tray.
Importantly, the settings you make through the utility are often stored in the mouse’s memory, which means that when you connect to another computer where the program is not installed, your sensitivity and button preferences will be retained.
Where to download the official utility?
Solution: The mouse is not working or shutting down
Despite the simplicity of the technology, users can face a number of problems, the most common of which is spontaneously turning off the device or refusing to connect. If the Xiaomi mouse does not connect, the first thing to check is whether Windows has activated flight mode, which blocks all wireless interfaces.
Another common problem is the mouse falling asleep. To save power, the device goes to sleep after a few minutes of inactivity. It can take 1-2 seconds to wake up, which some users perceive as freezing. In the Windows Power Settings (Control Panel → Power → Change the circuit settings → Change additional power settings), you can find USB settings and prevent the port from turning off to save energy.
⚠️ Attention: If the cursor moves chaoticly or "shaking," check the surface on which the mouse is located. Xiaomi's optical sensors may not work well on glossy, glass or mirrored tables without a mat.
In case nothing works, do a full Bluetooth reset on your laptop. Open the command line with administrator rights and enter a stack reset command if the driver provides, or simply use the Windows troubleshooter, which can be found in the Update and Security section → Troubleshooth → Bluetooth.
Advanced capabilities and hidden functions
Many users are unaware that some Xiaomi mouse models have hidden features available through specific key combinations. For example, long-term pressing of the button combination can switch devices between different profiles or change the communication channel in Dual Mode mode without using a physical switch at the bottom.
And there's also the possibility of using a mouse as a presenter, and if you install the extra software, you can program the side button to switch slides to PowerPoint, which makes it a versatile tool for office work and speech, and it turns the regular periphery into a multifunctional control device.
For minimalist enthusiasts, it is important to know that the mouse automatically shuts down when lifted above the surface, which prevents random movements of the cursor during typing, a feature implemented at the sensor level and does not require software adjustment, ensuring comfortable operation in all conditions.