How to connect wireless headphones Xiaomi AirDots 2 to Android

Modern users increasingly refuse wires, choosing compact TWS-Headphones like the Xiaomi Mi True Wireless Earbuds Basic 2. These devices are valued for their affordable price and good sound quality, but their initial setup sometimes raises questions for beginners. The process of synchronizing gadgets with the Android operating system does not always go smoothly from the first time, requiring knowledge of certain nuances.

In this article, we will take a look at the algorithm that will allow you to quickly and correctly set up the headset. You will learn not only about standard pairing, but also how to make both headphones work simultaneously if a synchronization occurs. The right sequence of actions will help avoid most of the typical mistakes that owners of budget models face.

Before we get to the practical steps, it is worth noting that the stability of the connection depends on the battery charge. Make sure that the case and the headphones themselves are charged at least 20-30%, this will eliminate situations where the device is discharged during the setup process or does not enter detection mode due to low voltage.

Preparation of headphones for the first turn on

The first step is to remove the headphones from the charging case, and if you don't, the charging won't go, and the gadget won't turn on. Place them in the case for a few minutes to make sure there's power.

When removed from the case, the headphones automatically go into pairing mode, as evidenced by a flashing indicator. On the AirDots 2 model, the indicator is lit white when the device is ready to search for the phone, at which point the internal synchronization of the left and right channel between each other occurs.

⚠️ Warning: Don’t be in a hurry to turn on Bluetooth on your phone right away. Wait until the headphone lights start flashing slowly (about once per second), which means the end of the internal pairing of channels.

If the lights flash quickly and take turns, the headphones are still looking for each other, so put them back in the case, close the lid, and wait 5-10 seconds, and then repeat the extraction procedure. The stable connection between the left and right earphones is the foundation for further work.

💡

Before first use, wipe the metal contacts on the headphones with dry cloth to remove possible factory contaminants that interfere with charging.

Activation of Bluetooth on a smartphone

Now you need to prepare your Android smartphone to receive the signal. Open the notification curtain and press the Bluetooth icon or go to the Settings → Bluetooth menu. Make sure the switch is in the active position.

Android will start scanning available devices within range, which can take anywhere from 3 to 10 seconds depending on the operating system version and processor model. On the list of available devices, you need to find the name AirDots 2 or Mi True Wireless EBs Basic 2.

Sometimes a phone may suggest pairing with one of the channels, for example, L_AirDots 2. This is normal for older versions of the protocol, but ideally you should see just AirDots. 2. Click on the device name to start the pairing procedure. If you need confirmation, select Pair or enter the code. 0000, Although this model does not usually require code.

The pairing and tuning process

Once you click on the device name in the list, you'll see a request on your smartphone screen to allow access to contacts and call logs. You can agree or refuse, it won't affect the music playback, but it will limit the functionality of the headset when you make calls.

Successful connectivity is confirmed by a voice message inside the headphones: Connected. At the same time, the indicator will stop flashing, and it will light up less often, signaling to work in standby or playback mode. Now the sound must be broadcast through the headset.

In the Bluetooth menu, you can click on the gear icon next to the headphone name for additional settings. It often displays the charge level of each headphone separately, which is very convenient for control. You can also rename the device in this menu so that it is easily recognized in the list.

Solving the problem with one working headphone

One of the most common problems is when the sound is only going to one headphone, or the phone sees two separate devices. L_AirDots 2 and R_AirDots 2. This means that the synchronization between the channels is broken and they need to be reconnected manually.

To start, remove (forget) the device in your phone's Bluetooth settings. Then turn off Bluetooth on your smartphone completely. Now you need to reset the headphones to the factory. To do this, press the touch buttons on both headphones simultaneously and hold for about 20 seconds until the indicators flash red several times.

⚠️ Attention: When you reset the headphones can turn off on their own. That's OK. Put them in the case, close the lid, and then re-extract them to try to pair again.

Once reset, turn on Bluetooth again on your phone and find the device. It's important to do the search again, because the old connection could have preserved the error. If the problem persists, try connecting the headphones to another phone to rule out the malfunction of the smartphone itself.

Control and voice commands

Xiaomi AirDots 2 features touch controls that are implemented through tapping on the headphone body. One touch usually pauses music or plays a track. Double tap on the right earpiece is often used to answer an incoming call or re-dial the last number.

Calling a voice assistant (Google Assistant or Siri) requires a triple touch of the right earpiece. The left earpiece, when triple tapped, can switch tracks back or activate Game Mode, which reduces latency, which is critical for shooters.

The volume of the sound in this model is controlled directly from the phone, because the headphones themselves do not have separate buttons for this, but some firmware versions allow you to adjust the volume with the phone's system buttons, dubbing the command on the headset.

Diagnostics and maintenance

To maintain stable operation, you must periodically clean the speaker's mesh of earwax and dust. Pollution can lead to a quiet sound or its complete disappearance in one of the channels. Use a soft dry brush or cotton swab lightly moistened with alcohol (do not allow liquid to enter).

If the headphones are no longer charging in the case, check the contacts. Oxidation or dirt on the contacts of the case and the headphones themselves is a common cause. Wipe them with a wipe or an alcohol wipe. Also make sure that the case charging cable is good and delivers sufficient current.

⚠️ Warning: Do not use headphones in extremely cold temperatures. Lithium polymer batteries can lose charge dramatically or stop giving up energy in the cold.

In case of complete loss of performance, when the headphones do not respond to any action, try to leave them in the case on charging for 1-2 hours. Deep discharge could put the controller into sleep mode, and it needs time to “rock”.

💡

Regular cleaning of contact groups and speaker grids prolongs the life of headphones and prevents 80% of sound problems.

Frequently Asked Questions (FAQ)

💡

If you plan to use headphones for sports, fasten them in the ear with the right angle to ensure better tightness and bass sound.