How to connect the antenna to the TV Xiaomi: instructions with photos and tips

Connecting an antenna to a Xiaomi TV is a challenge that owners face when they buy a device or move to a new location. Despite the seeming simplicity, the process has nuances, from choosing the right cable to configuring digital channels in the Mi menu. TV. In this article, we will analyze all ways of connecting - an air antenna for DVB-T2, cable TV from the provider and even a satellite dish, if your model supports DVB-S/S2.

Feature of Xiaomi TVs (series Mi) TV A, Mi TV P1, Mi TV Q1/Q2 and others. - Universal connector RF-IN (It's called an "antennae entrance," which is compatible with most broadcast standards, but not all models have built-in systems. CAM-satellite TV — We'll also tell you how to get around common mistakes, like when the TV doesn't find channels or shows artifacts on the screen.

If you're setting up your antenna for the first time or have problems after updating your firmware, this guide will help you figure it out without calling the wizard, and for convenience, we've broken the process down into steps, from physical connectivity to fine-tuning the broadcast settings.

What antennas support Xiaomi TVs

Xiaomi TVs are compatible with three main antenna types, but support depends on the model and the region of sale.

• 📡 Etheric antenna (DVB-T2) — It is suitable for receiving digital channels in the standard DVB-T2 (All Xiaomi models support this format, but a stable signal may require an amplifier.
• 📺 Cable TV (DVB-C) — It's used by providers like Rostelecom or Akado, and it requires manual frequency settings (which is provided by the provider), and some budget models (such as Mi). TV 4A) may not support DVB-C — specify in the specifications.
• 🛰️ Satellite antenna (DVB-S/S2) — plug-only LNB IN (Like Mi. TV Master or Mi TV Q1E). Others will need an external receiver.

To check your model’s standards, go to the Settings menu. → Channels → Type of antenna, if there's no point DVB-S, So, satellite TV Connecting directly will not work.

In the CIS countries for the air TV standard DVB-T2 coded MPEG-4. If your Xiaomi TV is purchased in China (models with a prefix) CN in the title), it may not support this format - you will need firmware or external tuner.

Necessary tools and accessories

Prepare everything you need before you connect.

• 🔌 Antenna cable - standard RG-6 with a wave resistance of 75 ohms. the length should not exceed 15-20 meters (the longer, the weaker the signal).
• 🔄 F connectors: 2 (to connect the cable to the antenna and TV) Better to use crimping, not twisting.
• ⚡ Signal amplifier (optional) – you need to use a passive antenna if you live far from the tower.
• 📱 The remote control is for navigating the menu. In some Xiaomi models, the channel setting is possible only through the original remote control.

If you're connecting cable. TV, Check with the provider if you need it. CAM-module (to decode pay channels) for satellite antennas will require additional:

• 📡 converter (LNB) — plate-mount.
• 🔗 DiSEqC switch – if you connect multiple satellites.
• 💳 Access card – for paid packages (for example, Tricolor or NTV-Plus).

💡

If you live in a low signal zone, choose an antenna with a gain of at least 28-30 dB. To check the signal level in your region, use the RTRS coverage map: map.rts.rf

Step-by-step: connecting the antenna to Xiaomi TV

Consider a universal algorithm for an air antenna (DVB-T2). For other types of antennas, the steps will be similar, but adjusted for the settings in the menu.

1. Physical connection

First, connect the antenna to the TV:

1. Turn off the TV (remove the plug from the socket).
2. Connect the antenna cable to the connector RF-IN It's on the back of the TV, and the connector is usually signed as ANTENNA or DTV.
3. Twisting the F-connector clockwise to the point (do not tug so as not to damage the connector!).
4. Connect the power to the TV and turn it on.

Selection of signal source

On the Xiaomi remote, click the Source (or Input) button and select TV In some models, this item may be called the antenna. DTV (Digital TV).

If the TV doesn’t respond to pressing, check:

• 🔋 Batteries in the remote (replace if discharged).
• 📶 Correct cable connection (try to move the connector slightly - sometimes the contact disappears).
• 🔄 Reboot the TV: Press the power button on the remote for 5-10 seconds.

3. Automatic channel search

Go to the channel settings menu:

1. Press Menu on the remote. → Select Settings (cog icon).
2. Go to the Channels section → Channel setting.
3. Select AutoSearch and confirm launch.

The TV will suggest you choose the type of antenna. TV choose DVB-T2, cable-wise — DVB-C. If you are not sure, leave the car.

Wait until the search is finished (it can take 5-15 minutes), when the TV will show you the list of channels found, and if there are no channels or too few, go to manual settings.

Manual Channel Configuration: When and How to Use

Autosearch doesn’t always work well, especially if:

• 📶 Signal weak or unstable.
• 📡 Cable is used. TV non-standard.
• 🛰️ Satellite antenna connected.

For manual adjustment:

1. Go to Settings → Channels → Manual search.
2. Select the type of antenna (DVB-T2, DVB-C or DVB-S).
3. For DVB-T2 specify the frequency of multiplexes (for Russia it is 554 MHz and 490 MHz for the RTRS-1 and RTRS-2).
4. For DVB-C enter the parameters from the provider: frequency, transfer rate (Symbol Rate) and modulation (QAM-256 most common).
5. Click Search and wait for the result.

Example of parameters for cable TV (Rostelecom, Moscow):

If manual search does not give results, check:

• 🔌 Correct cable connection (try another connector or cable).
• 📶 Signal level in the Settings menu → Channels → Signal status. If it's below 40 percent, you need an amplifier.
• 🔄 Update the TV firmware (instructions in the next section).

💡

For satellite TV (DVB-S) manually specify the parameters of the transponder: frequency, polarization (H/V) This data can be found on the operator's website (e.g. Tricolor or NTV-Plus).

Update: If the TV does not find channels

If the Xiaomi TV doesn’t find channels after connecting the antenna or if it produces a “No signal” error, the problem may be outdated firmware, especially for models purchased abroad (e.g. in China), where broadcast standards differ.

To update the firmware:

1. Go to Settings → About TV → System Update.
2. Click Check for updates.
3. If a new version is available, confirm installation. The TV will restart.

If the automatic update does not work:

• Download the latest firmware for your model from the official Xiaomi website (Support section).
• Copy the file to a flash drive (format) FAT32, not NTFS!).
• Put the flash drive in. USB-TV port and select Update via USB refresher.

Critical information: For models of Mi TV 4S/4A china-fixed (CN ROM) Reflashing to the global version (Global) ROM) support DVB-T2 This can be done through a service center or independently (instructions are available on the forums). 4PDA).

💡

Before updating the firmware, reset the channel settings: Settings → Channels → This will help avoid conflicts with new broadcast parameters.

Solving common problems

Even when connected properly, there can be failures, and let's look at typical situations and how to fix them.

1.The TV doesn't find channels (or finds too few)

Causes and solutions:

• 📶 Weak signal, check the level in the signal status menu. If it's below 40%, reorient the antenna or set the amplifier.
• 🔌 Bad contact – try another cable or connector.
• 📡 Incorrect search parameters – for manual search, specify the multiplex frequencies in your region (for example, on the RTRS website).
• 🔄 Firmware failure - update the TV software (instruction above).

2. Channels show with artifacts (stuttering, squares)

This is a sign of an unstable signal.

• 🔧 Reconnect the cable (sometimes it helps to replace the F connector).
• 📶 Place the antenna above or closer to the window.
• ⚡ Turn off the amplifier (if any) – sometimes it causes interference.
• 🔄 Change the power source of the antenna (if it is active).

3.The TV does not store the channels found

Possible causes:

• 🔋 Memory Lack – Reset channel settings and repeat the search.
• 📱 Remote failure – try using the Mi Remote app on your smartphone.
• 🔄 Older Firmware – Update the TV.

⚠️ Warning: If after updating the firmware TV stopped turning on or got stuck on the Mi logo, do not try to reset the settings through the menu. USB Recovery Mode (instructions are available on thematic forums).

Satellite antenna setting (DVB-S) Xiaomi TV

Not all Xiaomi models support satellite TV. Check for the connector. LNB IN If you don't have one, you'll need an external receiver (e.g. Xiaomi Mi Box S with support). DVB-S).

For models with built-in tuner (for example, Mi). TV Master):

1. Connect the cable from the satellite antenna to the LNB IN connector.
2. Go to Settings. → Channels → Type of antenna → DVB-S.
3. Select Manual Search and enter the transponder parameters (the data can be obtained from the operator’s website).
4. Example for Tricolor TV: Satellite: Eutelsat 36E Frequency: 12226 MHz Polarization: Left (L) Symbol Rate: 27500

Search

If the channels are not:

• 📡 Check the antenna alignment (use a leveler).
• 🔌 Make sure the cable is not damaged (especially at the joints).
• 🔄 Update the list of transponders (they may change).

It's important! You'll need to watch encrypted channels (like NTV-Plus) CAM-Module and operator smart card. Insert module in slot CI+ back-screen.

FAQ: Frequent questions about connecting the antenna to Xiaomi TV