Modern smart media players, such as the Xiaomi Mi Box or Mi TV Stick, are full-fledged Android TV computers that require periodic maintenance. Sometimes users are faced with a situation where the interface stops responding to remote commands, applications freeze or video stream is interrupted due to a lack of RAM. At such moments, a standard turn off of the TV does not help, as the console itself continues to work in the background, maintaining the system’s erroneous state.
A competent reboot allows you to clear the cache of running processes, reconnect network modules and reset temporary software errors without losing user data. It is important to understand the difference between a conventional screen shutdown and a complete reboot of the device's operating system. In this article, we will discuss in detail all available restart methods, from standard software methods to hardware reset in case of a complete lockdown of the interface.
Timely restart of the device often solves 90% of performance problems without requiring complex manipulations or contacting the service center. Below are proven algorithms for various scenarios of the Android TV Box.
⚠️ Warning: Before performing any manipulation of system files or forced power outage, make sure that the device does not automatically update the firmware, as this may damage the bootloader.
Software reboot through the settings menu
The safest and most recommended way for the manufacturer to restore the system to normal operation is to use the built-in software interface, which allows the Android TV operating system to correctly complete all background processes, save settings and start the bootloader in normal mode. To access power management functions, you need to go to the main console menu using the remote control.
At the top of the screen, usually in the right corner, is a gear icon that indicates the entrance to the Settings section. After you go to this section, you should scroll down to the System or About tab, depending on the version of the shell installed, and this is where the key parameters for managing hardware components of the device are concentrated.
Inside the system menu, you need to find Reboot or Restart, and clicking on this button initiates a standard shutdown and then turn on procedure, the screen goes out, the indicator on the console body can blink, and then after 30-60 seconds the system will boot again, which is ideal for routine maintenance or fixing minor software failures.
- 📺 Click the menu button on the remote and select the gear icon in the upper right corner.
- 🔧 Go to the Device Settings or System section at the bottom of the list.
- 🔄 Find the Reset item and confirm the action by pressing the central button OK.
Hardware resetting power button on the body
In situations where the software interface is completely locked and the remote does not respond to pressing, the only way out is to use physical buttons on the device body. Most models Xiaomi Mi Box and Mi Stick are equipped with a hidden or stealth power button that allows you to control the state of the device directly, bypassing the software shells.
To do this, you need to find a round button on the console body, often located next to the USB port or hidden in a recess to protect against accidental pressing. A short press usually puts the device into sleep mode, but a full reboot requires a long hold on the button for 5-10 seconds, at which point the system forcibly terminates and turns off.
After the TV screen goes out and the indicator on the console stops burning, you should release the button and press it again to turn on. This method is analogous to the power button on a smartphone and is safe for the file system, since it initiates a regular shutdown signal at the kernel level of the operating system.
💡
If the power button on the case is missing or does not respond, try to turn off the USB cable (if the console is powered by TV) or remove the plug from the socket, but only after the activity indicator goes out.
It is worth noting that on some versions of the Mi TV Stick button can be combined with an infrared receiver or be extremely miniaturized. Careful inspection of the case in good light will help to detect the necessary control. Regular use of this method is not recommended, but in emergency cases it is indispensable.
Forced reboot by power outage
When software methods and body buttons fail, the last resort is to physically shut down the power source, a technique often referred to as “hard reset” in the everyday sense (though technically just a rigor), which allows the residual voltage in the capacitors to be relieved and forced to stop all processes, but it should be used with caution so as not to damage the file system.
The essence of the method is to remove the power cable from the socket or disconnect USB-It's important to wait for a pause at least if the set-top box gets its power from it. 10-15 This is the time required for the electrolytic capacitors inside the board to fully discharge, ensuring that RAM and temporary buffers are reset.
⚠️ Attention: Frequent use of the method of decompression during active data recording or system updates can lead to damage to internal memory partitions and the occurrence of loading errors.
Once the power is turned on again, the system will start to boot again. In some cases, Android TV can start the disk check procedure, which is a normal reaction to an incorrect shutdown.
- 🔌 Remove the plug of the power supply from the electrical outlet or disconnect USB-cable.
- ⏳ Wait a minute. 15-20 Seconds to completely de-energize the device.
- ⚡ Connect the power back and wait for the Android logo to appear on the screen.
Reboot through third-party apps and remote
For users who value convenience and want quick access to reboot features without diving deep into the system menus, there are dedicated apps. In the Google Play Store on the console itself, you can find utilities like TV Remote or Reboot for Android TV that add a convenient restart button directly to the home screen.
In addition, some universal remotes or remote control apps on a smartphone (such as Google Home or Android TV Remote Control) allow you to control the power of the device remotely. If a standard remote is lost or fails, a smartphone with an infrared port or connected to the same Wi-Fi network can be a great tool for typing a command to restart.
Secrets of Xiaomi remote
Using third-party software gives flexibility, but requires the installation of additional software. APK-This is especially true for advanced users who customize the console to their needs and want to have full control of the system.
It is also worth mentioning the possibility of using ADB (Android Debug Bridge) for reboot if you have access to a computer. adb reboot command sent via USB-cable or over the network, will perform an instant and clean reboot of the device, which is often used by developers and enthusiasts.
Comparison of reset methods
The choice of the specific method of recovery depends on the current situation: whether the interface is completely frozen, whether the remote is working or there are periodic lags. Understanding the differences between methods will help you to act most efficiently and safely for the device in each case.
A soft reboot through the menu is preferred for daily use, while hardware methods are reserved for emergencies. The table below will help to systematize knowledge about each method and quickly select the appropriate option.
| Method | Security of data | Speed. | When to use |
|---|---|---|---|
| Through the settings menu | Tall. | Medium | Planned reset, minor disruptions |
| The button on the body | Tall. | Fast. | The remote does not respond, the interface freezes. |
| Power outage | Medium | Instant. | Total system failure, "brick" |
| Annexes/ADB | Tall. | Fast. | For advanced users, remote management |
⚠️ Warning: If the problem recurs regularly after any of the above reboots, it may indicate a device overheating or critical lack of free memory, which requires a deeper diagnosis.
Typical problems after reboot and their solution
Sometimes, after a successful reboot, users may find some apps not opening or network settings reset, a normal behavior for the Android operating system, which takes time to index files and restore connections between components after a reset.
If the Xiaomi Mi Box takes a long time to load or a black screen appears, try checking the connection. HDMI-You can also choose the right source of the signal on your TV, and make sure that the power supply provides enough voltage, especially if you use it. USB-hubs.
☑️ Post-restart diagnostics
In rare cases, a full Factory Reset may be required if the software errors are system-based and are not fixed by a normal reboot, but this is an extreme measure that will remove all your data and installed applications, returning the device to the “out of the box” state.
Regular maintenance of the device, including cleaning the cache and installing updates, will help minimize the need for frequent reboots.
💡
Proper reboot through the menu is the best way to extend the life of the console file system and avoid data writing errors.