Modern Smart TV from Xiaomi, working on the basis of the Android operating system TV, Periodic reboot allows you to clear the RAM from temporary files, complete the suspended background processes and eliminate software failures that inevitably accumulate during operation. Many users mistakenly believe that it is enough to simply turn off the screen with a button on the remote, but this puts the device only in deep sleep mode, and does not completely clean the system caches.
If your Xiaomi TV is slower, has stopped responding to remote commands, or applications have stopped running, you need to perform a forced or regular restart. Unlike conventional button TVs, it is important to follow the correct algorithm of actions to avoid damaging the file system. In this guide, we will discuss in detail all available ways to reboot, from standard menus to hardware methods for emergency cases.
Staff reboot through the system menu
The safest and most appropriate way to restart a smart TV is to use an integrated programming interface, which ensures that all active processes are completed correctly by the system and that the file system is not damaged by a sudden power outage.
You need to press the Home button on the remote to call the launcher's main menu, then move the cursor to the top right corner of the screen, where the gear or user profile icon is usually located, and in the list of parameters that opens, you need to find the section responsible for the general settings of the device or system.
- 🔘 Click the menu button on the remote and select "Settings».
- 🔘 Go to the "Device and Preferences" or "System" section».
- 🔘 Find the section “About TV” or “About device».
- 🔘 Select the “Reset” option and confirm the action.
⚠️ Note: In some versions of the firmware MIUI for TV The reset point may be hidden in the off menu. If you don't see the explicit "Reset" button, try clamping the off button on the remote on the 3-5 Seconds – a pop-up window may appear on the screen with a choice between “Sleep” and “Reboot».
Once confirmed, the system will start a shutdown process that will take 10 to 30 seconds. The screen will go out, the status indicator may flash, after which the device will automatically turn on again. Don't panic if the Android or MI logo download process takes longer than usual - at which point the system files are checked.
💡
If the remote stops responding while you’re getting stuck, try using a physical power button on the TV’s body itself (usually on the bottom or back), a short tap often triggers a shutdown menu.
Use of remote control
Remote control in Xiaomi TVs is not only for channel switching, but also for system operations. There are several key combinations that allow you to initiate a reboot without the need to dive deep into complex settings menus, this is especially true when the interface is working but reacts with a delay.
The standard method is to hold the shutdown button for a long time. However, depending on the remote model (Bluetooth or IR port), the behavior of the system may differ. In classic IR remotes, prolonged pressing often simulates a physical shutdown, while Bluetooth remotes can transmit a program signal to restart the interface.
There is also a hidden key combination that works on many models with a pure Android TV. If you press and hold the Home and Turn Off button for 5-7 seconds at the same time, the TV can force the graphics shell to restart.
⚠️ Note: Do not use the long-term button clamping method if the screen is in the process of updating the system or installing applications. Interrupting the data record to memory can lead to a software failure that requires flashing.
It's important to distinguish between remote signals. If you press the buttons on the TV, the LED light turns on, but the actions are not performed, the problem may not be in the TV, but in the category of batteries or desynchronization of the Bluetooth connection, in which case a simple replacement of the batteries can solve the problem of "hang."
☑️ Checking the remote
Hardware reset via power button
When software methods are not available because of the system freezes, the hardware method comes to the rescue. Most Xiaomi TVs, including the TV P1, TV 4A and TV 5 series models, have a physical control button that can be placed on the bottom edge, back or sidebar, often hidden from prying eyes to preserve the aesthetics of the design.
To perform a hard reboot, you need to find this button. Depending on the model, the algorithm of actions may vary slightly. Most often, a short press is required to turn on or off, but it may require retention to reboot. This method is similar to rebooting a computer with a Reset button, but in a more gentle mode.
If the button on the case is missing or unavailable, you can use the power out method. This method is an extreme measure and is not recommended for regular use, since it does not allow the system to correctly complete the background processes of writing logs and temporary files.
| Method | Action. | Risk of data loss | Recommended frequency |
|---|---|---|---|
| Menus. | Through settings | Absent. | As necessary |
| remote | Long pressing | Minimum | When the interface freezes |
| Body button | 10 seconds retention | Low. | When the remote fails |
| Power outage | Pull the cord. | Medium. | Only in emergency cases. |
| Security | Tall. | No. | Weekly |
| Speed. | Medium | No. | At lags |
| Efficiency | Tall. | No. | When you're dead, you're hanging. |
| Risk | Low. | Possible. | Very rarely. |
After the hardware reset, it is recommended to wait 1-2 minutes before re-energizing, which is the time it takes for the capacitors on the motherboard to completely discharge and the residual voltage to disappear, only after that you can reconnect the device to the network and start it.
💡
The hardware button on the case is a “lifeline” when the software part of the system completely ceases to respond to external commands.
Forced reboot by power outage
The full-energization method is the most radical, but often the only possible solution when the Xiaomi TV is in a “dead freeze” state, in which the device’s processor stops processing any incoming signals, including commands from the IR port and Bluetooth, as well as reactions to physical buttons.
To do this, you need to physically disconnect the power cord from the socket or from the TV itself, and it's not just to turn off the switchboard if you have one, it's to break the electrical circuit. You have to wait at least 60 seconds for a break after that, which is critical for resetting static charge and cleaning up volatile memory.
Some users practice the fast on-off method, but for modern electronics with large capacities, this is less effective than full waiting.
⚠️ Note: It is strongly recommended not to use the cord pulling method while running the built-in antivirus, scanning memory or updating system components.
Once turned on, the TV can behave unusually: the first turn on can take up to 2-3 minutes, artifacts may appear on the screen or sound distortions, this is a normal reaction of the system to incorrect shutdown, it conducts self-diagnosis and restore the integrity of the file system.
Reboot through the mobile application
Smartphone owners can use Xiaomi’s ecosystem to control the TV, which opens up additional opportunities for reboots. If the remote is lost or malfunctioning, and the buttons on the case are inconveniently located, the smartphone becomes the main control tool.
This requires that the TV and smartphone are on the same local Wi-Fi network. Using the Mi Home or Google Home app, you can access basic control functions. In the Mi Home app, after selecting the device, a switch-off button or a menu of additional settings is often available.
- 📱 Launch the Mi Home app on your smartphone.
- 📱 Select your TV from the list of devices in the room.
- 📱 Click on the menu icon or three dots in the corner of the screen.
- 📱 Select the “Switch off” or “Reboot” command if available.
What to do if your phone can’t see TV?
The advantage of this method is that it can control even when the infrared port of the remote does not penetrate the TV, but if the TV system is getting stuck, the network interfaces may also not respond, and this method will be useless.
Diagnosing problems after rebooting
Once you have rebooted your Xiaomi TV, it is important to analyze its behavior, and if the problem was a one-time one, such as a temporary malfunction of a particular app, no further action is required, but if symptoms recur, a deeper diagnosis is needed.
Pay attention to the speed of the desktop loading. If the process takes much longer than usual, or the interface twitches, this may indicate a lack of free memory or overheating of the processor, in such cases, one reboot may not be enough.
Check for software updates. Often, manufacturers will issue patches that fix known system stability errors. Go to the settings and check the firmware version.
If the TV continues to behave incorrectly even after rebooting and upgrading, a factory reset may be required, which will delete all user data, accounts and installed apps, returning the device to the “out of the box” state.
💡
If after a reboot the problem disappears, but after a while it returns – look for the reason in a specific application running in the autoboot, or in the overheating of the device.