Modern smart TVs are complex computer systems running Android TV. Like any gadget, they can experience software failures, application freezes or interface slowdowns. In such situations, the standard and most effective solution is to reboot the device, which allows you to clear RAM and restore normal service.
However, Xiaomi and Mi TV owners often face the lack of a physical shutdown button on the case, which causes confusion among new users. The restart process can vary depending on the remote control model and the version of the installed firmware. Understanding the various reboot methods will help you quickly return the device to working condition without having to disconnect from the power grid.
In this guide, we will take a look at all the available methods, from standard software methods to forced reboot in critical situations. We will also look at what is different from a full reset to factory settings so that you do not lose your data by accident. Properly executing procedures will ensure the long life of your multimedia center.
Standard Reboot via the Settings Menu
The safest and most correct way to restart a Smart TV is to use the standard operating system interface, which ensures that all running processes are completed correctly and the file system is not damaged. First, you need to go to the main menu by clicking the button with the image of the house or gear on the remote.
The navigation can then vary slightly depending on the version of the PatchWall shell or pure Android TV. You need to find the Settings section, which is usually located at the top right of the screen.
Inside the system menu, find the Restart option, which will start the shutdown procedure and automatically turn on after a few seconds, and is ideal for a scheduled reboot, such as after installing new applications or updating system components.
💡
Before restarting through the menu, close all active applications so that the process goes as quickly as possible and without cache writing errors.
If the standard path seems too long, you can use an alternative option: some Xiaomi remotes have a keyboard combination or a separate power button, the retention of which causes the off menu, but the software path through the settings remains the most universal for all models.
Use of remote control
Remote controls on Xiaomi and Mi TVs can have different button configurations, which affects how to quickly reboot. Owners of Bluetooth remotes can often use the power button holding method. Press and hold the power button on the remote for 3-5 seconds until the system dialog window appears on the screen.
In the menu that appears, select Reboot. If your remote does not respond to a long press or only causes a standard screen shutdown (sleeping), try a different approach. Some models support reboot through a combination of buttons, such as pressing the Back and Menu buttons simultaneously, although this depends on the specific motherboard model.
- 🔘 Press and hold the power button on the remote until the menu appears.
- 🔘 Select the Reboot option with the navigation buttons.
- 🔘 Confirm the action if the system requests confirmation.
- 🔘 Wait for the Mi or Android logo to appear.
It's important to distinguish between sleep and shutdown, and when the TV goes to sleep, it continues to consume energy and maintain the state of the system in memory, and rebooting completely resets the state of RAM, which is what is required to eliminate the failures.
If the remote is lost or stopped working, don't despair. There are alternative control methods that we will discuss in the next sections, and it is also worth checking the batteries in the remote, as poor power can prevent the signal from transmitting to an IR receiver or Bluetooth module of the TV.
Forced reset when getting stuck
Situations where the Smart TV interface completely stops responding to remote commands are called "freezes" or freezes, in which case the software methods through the menu become unavailable, the only way out is hardware or forced reboot, which simulates a power outage, but is performed more safely for electronics.
The first way is to use a physical power button on the TV body, which is placed on many Xiaomi models in the back, bottom or side, often hidden from view so as not to disturb the design. Find this button (sometimes it is combined with a joystick) and press it once to call the menu, or hold it for 5-10 seconds to force the switch off.
⚠️ Warning: Do not use the method of disconnecting from the socket too often.Abrupt shutdown can damage the file system or lead to the loss of unsaved data in the application cache.
If there's no button on the body, you have the classic "pull the plug" method, and you take the plug out of the plug and wait at least 60 seconds, and it takes that time for the capacitors inside the TV to run out completely and the residual current to disappear, and then you can turn the device back on.
Once turned on, the system can perform a file system check, which will take longer than usual. Don't panic or interrupt the process. Forced reboot often helps to get rid of errors caused by buffer overflows or driver conflict.
Why does the TV warm up after turning on?
Reboot through the mobile application
Smart home management and media are increasingly shifting to smartphones, and if the remote is lost and the buttons on the case are not available, Mi Remote or Google Home is a great solution, and to work this method, the TV and phone must be connected to the same Wi-Fi network.
Install the official Mi Remote app (for Xiaomi devices) or use the built-in remote feature in the MIUI/HyperOS shell. Once the device is paired, you will have full access to the TV interface on the smartphone screen. Navigation is done via a virtual touchpad.
The algorithm is simple: open the app, select your TV, go to the settings menu via the virtual remote, and reboot as described in the first section. This is a convenient way if the remote's IR port is out of order, but the TV's Wi-Fi module is functioning normally.
- 📱 Make sure your phone and TV are on the same Wi-Fi network.
- 📱 Launch the Mi Remote app or analogue.
- 📱 Connect to the TV on the TV. IP-address.
- 📱 Use the screen remote to navigate the menu.
In some cases, if the interface is dead, the application may not connect, so you should try sending a shutdown command through the app, wait for the screen to turn off, and then physically shut down the power, which is a milder option than just pulling the cord.
Reset to factory settings (Hard Reset)
If a conventional reboot doesn’t help fix persistent bugs, lags, or connectivity issues, a complete system reset may be required, which takes the TV software back to “out of the box” by removing all user data, accounts, and installed apps.
You can reset via the Settings → Device → Reset (or Factory Reset) menu, which will alert you that all data will be deleted. Make sure you remember the login data to your Google account and Mi Account, as it will be required for the initial setup.
| Parameter | Reboot (Restart) | Reset (Factory Reset) |
|---|---|---|
| Data retention | All data is stored. | Complete deletion of data |
| Installed annexes | Stay put. | Removed completely |
| Wi-Fi settings | Preserve. | Dropped. |
| Implementation time | 1-2 minutes | 10-15 minutes. |
There is also a Recovery Mode reset method that is used if the TV doesn't load to the desktop, which is to turn off the TV, then press the power button on the case (or the "Enter" button on some models) and turn on the power. In the menu that appears, use the volume buttons (if any) or remote, select Wipe Data.
⚠️ Warning: Before performing a reset, be sure to write down Wi-Fi passwords and check your subscriptions to streaming services so you don’t lose access to content.
Once the reset is complete, the TV will look like you just bought it from a store, you'll need to re-activate, connect to the Internet, and install the apps you need, a radical but often the only way to save the device from software bugs.
☑️ Preparation for discharge
Diagnosing Nutrition and Upgrade Problems
A common cause of Smart TV malfunction is power problems or failed system updates. If the TV turns off on its own or doesn't turn on after an upgrade, the problem may lie not in the software, but in unstable voltage or damaged system files.
Check the outlet to which the TV is connected. Using low-quality network filters or overloaded extension cords can cause voltage drawdowns, which are perceived by the system as a signal to turn off. Connect the TV directly to the wall for inspection.
If the problems started after the software update, a broken data packet may have been downloaded, in which case re-installing the update will help. Go to Settings → Device → System Update and check for new versions. If the update is already worth it, try clearing the cache of the system application "Software Update" in the application settings section.
💡
A stable voltage in the network is the key to a long life of electronics. Use high-quality outlets and avoid network congestion.
In rare cases, manual flashing through may be required. USB-The firmware file is downloaded from the manufacturer's official website for your particular model and written to a flash drive. The installation instructions are usually supplied with the firmware file.