How to transfer data from Android to Xiaomi Redmi: complete methods of transfer

Changing a smartphone always brings mixed feelings: the joy of a new device and the slight stress of having to transfer accumulated information. Owners of the Xiaomi and Redmi ecosystem are in a great position, as the company has developed powerful tools for data migration. One of the most popular queries is the question of how to transfer data from android to android xiaomi through bluetuse redmi, although modern methods often offer higher speeds.

In this guide, we will not only look at classic Bluetooth, but also more efficient ways, such as Mi Mover and Wi-Fi Direct transmission. You will learn about the nuances of settings, possible errors and how to fix them, this will allow you to start using the new gadget immediately after unpacking, saving all contacts, photos and settings of applications.

The data transfer process has become much easier with the release of Android 6.0 and higher, but the good old methods have not gone away. It is important to understand the difference between synchronization over the cloud and direct transfer between devices. Direct transmission over a local connection (Bluetooth or Wi-Fi) does not waste your mobile traffic and ensures data privacy.

Preparation of devices for data transmission

Before you start to act, you need to properly prepare both smartphones, this applies to both the old device from which the data will leave, and the new Redmi or Poco. Ignoring the preparatory stage often leads to connection interruption or errors when copying large files.

Make sure that both devices are enabled with Bluetooth and Wi-Fi. Even if you plan to use only Bluetooth for transfer, the Wi-Fi module is often required to establish a handshake between devices in modern versions of MIUI and HyperOS. Also check the battery level - it should be at least 50% on each gadget.

Clean up the memory of an old phone from unnecessary garbage.It makes no sense to carry gigabytes of cache or temporary files, it will only increase latency.Remove old downloads and unused apps to speed up the migration process.

• 📱 Charge both smartphones to a minimum of 60-70% Avoiding shutdown at critical times.
• 📶 Turn on Bluetooth and Wi-Fi modules in notification curtain or settings.
• 🔒 Unlock the screens of both devices and confirm trust when you first connect.
• 🗑️ Pre-clean the storage of temporary files.

It's worth noting that on Xiaomi's new device, when it first starts up, it will suggest you start migrating data, which is a built-in feature that's integrated into the original setup wizard. If you've already set up your phone, don't worry, you can find the portability app on the menu or download it separately.

Using Bluetooth to transfer files

Many users are still looking for a way to transfer data from Android to Android Xiaomi via bluetooth redmi, relying on this method as the most versatile. Indeed, Bluetooth is on every Android smartphone, and it does not require the installation of additional software.

First, you need to pair devices. On an old phone, find your new Redmi on the list of available devices. On the new phone, you'll see a request for confirmation of pairing — click Accept and check for matching digital codes. Once you successfully connect, the devices will be marked as "Conjugated."

To transfer files via the standard Bluetooth interface:

1. Open the Gallery or File Manager on your old device.
2. Select the necessary photos, videos or documents.
3. Click the “Share” button and select the Bluetooth icon.
4. In the list of devices, select your new Xiaomi.

⚠️ Note: Bluetooth transmission speed is limited by protocol and is usually between 1 and 3 MB/s. 1 GB of data transfer can take 10 to 20 minutes, making the method ineffective for large volumes.

If the transmission is frozen, try turning off and re-enable Bluetooth on both devices. Sometimes it helps to remove the old device from the paired list and try again. Also make sure that the phone screens do not go out during the process, as some Redmi models can interrupt the transmission in power saving mode.

💡

Use Bluetooth only to transfer contacts, small documents, or a few photos, and for video and app backups, this method is too slow.

Mi Mover app: a standard solution from Xiaomi

A much more effective tool is the Mi Mover app, which is designed specifically for the Xiaomi, Redmi and Poco ecosystem. Unlike Bluetooth, the Mi Mover uses Wi-Fi Direct to create a direct link between devices, which provides speeds of up to 40-50 MB/s and up.

On new Xiaomi smartphones, the app is already preinstalled and is in the Tools folder. On an old Android smartphone (even if it is Samsung or Huawei), it must be downloaded from Google Play Market or scanned. QR-The code that will appear on the screen of the new phone, it takes less than a minute to install.

The process of working with Mi Mover is as follows:

• 🚀 Launch the application on both devices.
• 📲 On the new phone, select “I am the recipient” and on the old phone, “I am the sender».
• 📡 New phone will create Wi-Fi hotspot; connect it from old device.
• 📂 Select data types (contacts, messages, photos, apps) and click “Send».

An important feature of Mi Mover is the ability to transfer not only media files, but also the applications themselves along with their data (in some cases), this allows you to save progress in games or setting up messengers, which is impossible to do through standard Bluetooth.

Comparison of data transmission methods

So that you can choose the best way to deal with your situation, let's compare the basic methods, each with its advantages and disadvantages depending on the amount of data and the type of information being transmitted.

As you can see from the table, Mi Mover is the undisputed leader for owners of Xiaomi equipment. It combines high speed and no need to connect to the Internet. Bluetooth remains relevant only for emergency cases when you need to quickly transfer one file, and there are no other tools at hand.

Google Account is good for syncing system data, but downloading large photo albums can take a long time and consume traffic. Using a cable requires a special adapter (USB-C to USB-C or OTG), which not all users have.

Transferring contacts and multimedia through Google

Remember the classic Google account sync, which is the gold standard for Android, which allows you to save your contacts, notes and calendar events in the cloud, and when you log in to your account on the new Redmi, all of that data will be automatically logged in.

For photos and videos, Google Photos is the best service. Install the app on your old phone, enable sync and wait for all media files to be uploaded to the cloud. On the new device, just log in to the same account, and your entire photo gallery will be instantly available.

This method is especially useful if you are changing your phone temporarily, or if your old phone is already sold/lost but the data is still in the cloud, but it can be slow to set up out of the box initially because of the need to download data from the Internet.

⚠️ Note: When syncing through Google Photos, make sure that the quality of "Original" or "Saving space" is selected depending on the occupancy of your Google Drive. Free available only 15 GB.

If you use Viber, WhatsApp or Telegram, remember to back up the chats inside the apps themselves before resetting your old phone. Usually this is done via the Chats menu -> Backup -> Google Drive. Once you install the messenger on the new Xiaomi, it will offer to restore your correspondence history.

Problem Solving and FAQ

Users often encounter technical difficulties in transferring data, such as interruption of transmissions due to unstable Wi-Fi Direct connection or aggressive energy savings on one of the devices, in which case it is recommended to turn off the energy saving mode during the migration.

Sometimes apps don't port correctly, especially if the Android versions on the devices are very different, in which case Mi Mover will offer to download the current versions from the GetApps app store or Google Play.

If you encounter a “failed to connect” error when using Bluetooth, try clearing the Bluetooth cache on both devices via the Apps menu -> Show System -> Bluetooth -> Memory -> Clear. After that, restart your smartphones.

💡

The most reliable way to avoid errors is to use Mi Mover with both phones connected to chargers during the process.

Once the transfer is completed, check for all important files on the new Redmi, make sure the contacts are displayed in the phone book and the photos are visible in the gallery, and only after a full check can you start cleaning or selling the old device.