How to turn off the screensaver on the Xiaomi TV: all the ways of 2026

The screensaver on the Xiaomi TV is a useful feature that protects the screen from pixel burnout and saves energy. TV or Redmi Smart TV It suddenly goes out or shows a slideshow of photos instead of the expected content, and it's especially annoying when you're watching movies with credits, online broadcasts, or when you're using the TV as a PC monitor.

In this article, we’ll look at all the current ways to turn off the screensaver on Xiaomi TVs, from standard menu settings to hidden features that aren’t written about in the official documentation. MIUI TV), And what to do if you reset after you update your firmware. TV 4A/4S/4X/5X, Redmi Smart TV X, Mi TV Q1/Q2 and others based on PatchWall or Google TV.

Before you start, check your TV’s firmware version: the Settings path → On TV. → Software version: Some options may vary depending on the regional firmware (global, Chinese, Indian). TV Without the PatchWall shell, some of the instructions will be irrelevant – we will warn you about this separately.

1. Disable the screensaver through standard screen settings

The most obvious and safe way to do this is to use the built-in menu options. On most Xiaomi TVs, the path to setting up the screensaver is as follows:

1. Open the settings menu – press the Settings button on the remote or select Settings in the upper right corner of the main screen.
2. Go to the Screen and Sound section (or Display in some firmware).
3. Select “Sleep Mode” or “Energy Saving” – this is where screen shutdown timers are controlled.
4. Turn off the screensaver option or set the value “Never” for the “Time to Sleep” option.

On PatchWall TVs (e.g. Mi) TV 4X 55) The path may be slightly different:

Settings → Device → Screen and sound → Sleeping mode → Screensaver

If you don't have a screensaver on your menu, but the screen goes out after 10 to 30 minutes of inactivity, look for the "Sleep Timer" or "Switch off" setting, which is hidden under the Eco Mode option in some firmwares, which you also need to turn off.

Make sure the TV is not in child mode (limits settings)

Check if the Mode of the Movie is active (can reset timers)

Turn off the voice assistant (sometimes it resets the screen)

Update your firmware to the latest version (scavenger bugs are often fixed)-->

2. How to remove dynamic screensavers and advertising MIUI TV

Many users complain not of the usual blackout of the screen, but of intrusive dynamic screensavers - slideshows of photos, banner ads or animations from Xiaomi. These elements appear even when you use the TV actively and interfere with viewing.

Method 1: via PatchWall settings (for firmware with this shell):

1. Go to Settings. → Accounts and security → Advertising.
2. Turn off the options: 📢 «Personalized advertising» 🖼️ «Screenstools MIUI TV» 🔄 «Content recommendations»

Nutrition → Reboot.

Method 2: Reset recommendations (if the ad remains):

1. Open Settings → Applications → All applications.
2. Find the PatchWall app or «MIUI TV» and select "Clear the data».
3. Confirm the reset - it will remove the cache of banner ads.

💡

If the ad returns after a few days, try to shut down the internet for 10-15 minutes (pull the cable or turn off Wi-Fi).

Method 3: Radical (for advanced users only) - blocking ad domains via router. DNS following addresses:

miui.tv.ad.xiaomi.com


ad.mi.com




data.mistat.xiaomi.com

This will completely disable personalized advertising, but may disrupt some Xiaomi services (such as weather or content recommendations).

3. Hidden settings: the developer mode and ADB-team

If the standard methods do not work, you will need to use the developer mode and ADB-This is a way to do things for Android TVs. TV (Like Mi. TV Q1/Q2 or Redmi Smart TV X2022).

Step 1: Activate the Developer Mode:

1. Go to Settings. → On TV.
2. Find the line “Build number” and click on it 7 times in a row (the notification “You became a developer”) will appear.
3. Return to the main settings menu and a new section for developers will appear.

Step 2: Turn on the debugging on USB:

1. In the section "For developers" find the option Debugging by USB And activate it.
2. Connect the TV to your computer through USB-port (may be required) OTG-cable).
3. On the PC, install it. ADB Tools and execute command:

adb shell settings put global screen_off_timeout 2147483647

This command sets the screen shutdown timer to a maximum value (practically "never").

Additional commands for managing screensavers:

4. Features for TVs with Google TV (Mi TV Q1/Q2)

Models of Mi TV Q1 and Q2 They work on the Google platform TV, It's a little bit deeper than the PatchWall menu, but it's a little bit more nuanced:

Method 1: Using Google Settings TV:

1. Open the Settings. → System system → Screen.
2. Select Sleep Mode and set Never or maximum value (4 hours).
3. In the same section, disable the option "Savenger" (if it is active).

Method 2: disabling the "Screensaver" (for dynamic wallpaper):

1. Go to Settings. → Annexes → Special access → Screensaver.
2. Select “No” from the list of available screensavers.
3. If there's a point here «MIUI TV Screensaver - turn it off.

Method 3: Reset Google recommendations (if banner ads appear):

1. Open the Settings. → Accounts and entrance → Google → Advertising.
2. Turn off Personalized Ads and reset Advertising Identifier.

PatchWall (classic) MIUI TV)

Google TV (Mi TV Q1/Q2)

Android TV shellless

I don't know.-->

5.Why does the screensaver return after the update?

Many users are faced with the fact that after updating the firmware settings are reset, this is due to Xiaomi’s policy: the company forcibly includes energy-saving features to meet the standards of Energy Star (especially in European and American firmware).

How to fix it:

• 🔄 Reverse to the previous firmware version (if the update only caused problems). 4PDA or XDA Developers.
• 📥 Install custom firmware (e.g. LineageOS for TV), But it voids the warranty and requires unlocking the bootloader.
• 🔧 Use automatic script (for advanced): create a task in Tasker or Automate, which will reset the settings of the screensaver once a day.

Important: in firmware for China (CN) Energy conservation is less restrictive than global (EU/Global). If your TV supports region change, switching to Chinese firmware can fix the screensaver problem once and for all.

💡

After each major update (e.g., with a MIUI TV 3.0 by 4.0) check the settings of the screensaver again – they are often reset to default values.

Alternative solutions: external devices and workarounds

If the software methods didn’t help, consider hardware workarounds:

Method 1: Use of the HDMI-CEC:

• 📺 Connect to the TV device with support HDMI-CEC (For example, Xiaomi Mi Box, NVIDIA Shield or gaming console).
• 🔌 In the settings of this device, turn off sleep timers - signal CEC Keep the TV screen active.

Method 2: USB-mouse-mouse:

• 🖱️ Put it on the TV. USB-(via mouse) OTG-adapter if there is no port).
• 🔄 Use a script on your PC or a special application (such as Mouse Jiggler) that will slightly move the cursor every 5 minutes.

Method 3: Apps for Android TV:

• 📱 Install tools like “Keep Screen On” or “Caffeine” from Google Play – they block the screen from turning off.
• ⚠️ Note: Some applications require permission WRITE_SECURE_SETTINGS, which can only be issued through ADB:

adb shell pm grant [name packet application] android.permission.WRITE_SECURE_SETTINGS

Method 4: Physical locking (extreme case):

• 🔌 If the TV goes out due to overheating, check the vents and clean them of dust.
• 💡 Some of the models are illuminated (Mi) TV 4A) Shuts down at low voltage – use a power stabilizer.

💡

For TVs used as PC monitors, configure Windows Power Plan to High Performance and turn off the display in system settings.

7. Frequent mistakes and how to avoid them

When you turn off screensavers, users often make mistakes that lead to the opposite result.

⚠️ Warning: Do not turn off all energy-saving functions in a row, this can cause the TV to overheat. Leave at least an automatic shutdown active during prolonged inactivity (for example, after 4-6 hours).

Typical errors:

• 🚫 Resetting the TV to factory settings without a backup will bring back all screensavers and advertising.
• 🚫 Removing system applications (such as PatchWall) without root rights will lead to a reboot cycle.
• 🚫 Use of obsolete ADB-teams – in new firmware they may not work or cause failures.
• 🚫 Disabling system updates – this will deprive you of patches with screensavers in future versions.

If after manipulations the TV began to glit (spontaneously reboot, do not turn on), reset only the screen settings:

1. Go to Settings. → All settings → Resetting and remediation.
2. Select Reset Image Settings (not to be confused with a full reset!).

FAQ: Answers to Frequent Questions