How to turn off flash on your phone when calling Xiaomi

Xiaomi smartphone owners often face a situation where the device starts to blink actively with the LED when an incoming call arrives, a feature conceived as a useful notification in the dark or while watching movies can be annoying and distracting, and especially the question of how to turn off the flash on the phone when calling on xiomy, for those who are accustomed to the silence and minimalism of the interface.

Android in the MIUI shell or the new HyperOS provides many personalization tools, but finding the right switch is sometimes difficult due to frequent interface updates. In this article, we will discuss in detail all possible ways to deactivate light indicators, look at standard settings and hidden menus that will help you remove excess glow.

Before we get to the specific steps, it’s worth noting that the location of settings may vary slightly depending on the version of the operating system, but the general principle remains the same: notification management is focused on system settings or in the Phone application.

Standard Way through Notification Settings

The easiest and most common way to remove blinking is to use the standard system settings menu. In most current versions of Xiaomi firmware, this option is put into a separate subsection responsible for additional notification functions. You do not need superuser rights or install third-party software.

To start, open the main menu and find the gear icon. Go to Settings, scroll down to Notifications and Status bar. This is where the main switches that control the system's visual and audible signals are hidden.

Inside this menu, you'll see a list of apps that can use an LED. Find the Phone app or Incoming calls. If the switch is active, the system will make the flash flash flash flash every time you call. Turn off this switch to stop the light indication.

⚠️ Note: Some Redmi models and POCO simplified MIUI Lite may not be part of the menu, and in this case, the management is transferred directly to the Phone app, which we will discuss in the next section.

It's important to understand the difference between flash notification and flash flash flash flash flash flash flash. We set up short-term flashing, not constant light. Once you make changes, the system may require you to confirm or restart the interface so that the changes take effect immediately.

Configure through the application "Phone"

If you don’t find the right switch in the general settings, chances are your smartphone is controlled through the internal menu of the call app, which is typical of many modern Xiaomi models, where the call functions are isolated from the general system settings.

Open the standard Phone app you make calls through. In the upper or lower right corner of the screen, find the menu icon (usually three dots or three bars). Click on it and select Settings. Next, look for Incoming Calls.

This menu has the option of Flash on a call or Mi Flash, which is responsible for activation. LED-This is an indicator during the incoming connection, and you can put the slider in an inactive state, and this action will instantly turn off the lights for all contacts.

It's worth noting that in some versions of the shell, this feature may be called "Flash for Notifications." Don't confuse it with flashlight mode, which is triggered by a long press.

Use of the "Do Not Disturb" mode

Sometimes the user does not need to completely disable the function, but temporarily lock it, for example, during sleep or a meeting, for which the "Do Not Disturb" mode is ideal.

You can activate this mode through the notification curtain or in the Sound and Vibration settings. In the Do Not Disturb settings, find Visual Effects or Light Indicators, and you can prevent flash flash flashing here, even if the main switch is on.

This solution is great for those who want to keep the function for daytime, but avoid it at night, and the system will turn on the desired profile according to the schedule you set.

Using profiles allows you to not change your settings manually every time, you can set the automatic activation of the Do Not Disturb mode from 23:00 to 07:00, and the flash will stop bothering you at this time.

Third-party applications for LED management

In the rare cases where standard methods don't work or the interface is heavily modified by the manufacturer, you can use third-party software. There are many applications in the Google Play store that intercept control of the LED.

One popular solution is the Flash Alerts app, or its analogues, and once installed, it will request permissions to control the flash and access notifications, and you can set the settings for the app to describe in detail which contacts you want to blink for and which you don't.

The advantage of these programs is flexibility, so you can set the blinking colors for different subscribers or set complex blinking patterns, but for a simple shutdown, this can be a redundant solution.

Make sure that after installing a third-party app, you turn off the flash system notifications to avoid conflicts when two services try to control the same LED at the same time.

HyperOS and new versions of MIUI

With the release of the new HyperOS operating system, the menu structure has undergone significant changes, many items have been renamed or moved to the Additional Settings section, and users who have recently updated may not find the usual switches in the old places.

In HyperOS, try searching by settings. Click on the magnifying glass at the top of the settings menu and type in a flash or LED request. The system will tell you the actual path to the desired point. This is the fastest way to navigate in the updated interface.

It is also worth considering that in some regions, firmware (Global, China, EEA) Item names may vary. If you don't see the option, check if you have a simplified version of the shell that has the functionality. LED-The indicator can be cut down programmatically.

If after updating the firmware function stopped working or, conversely, turned on itself, it is recommended to reset the settings of the application "Phone" through the application management menu.

Impact of the energy saving regime

Remember that Xiaomi’s aggressive energy saving algorithms can block the LED light. If the flash doesn’t light up even when you set it up, check the status of the power saving mode.

When you activate the Saving Energy mode, the system shuts down all functions, including the light indication, to extend the battery life, in which case you don't need to turn off the flash separately - it no longer works.

However, if you want the flash to work always, add the Phone app to the battery exception list. Go to Settings → Battery → Settings and find the app you want. Set background activity limits to No Limits.

💡

If the flash flash flashes chaotically, try clearing the cache of the Phone app. Go to Settings → Apps → App Management → Phone → Clear the cache. This often resolves software glitches.

Understanding the logic of energy saving can help you avoid false diagnoses, and often the problem is not a broken function, but a smartphone’s priorities.

Frequently Asked Questions (FAQ)

💡

Flash management on Xiaomi is most often either in the general notification settings or inside the Phone app, depending on the MIUI version.