Owners of powerful smartphones like the Poco X3 Pro often experience an intrusive tactile response that interferes with focus or annoys them in quiet rooms. Vibration when typing on a standard MIUI or Gboard keyboard can be too intense, creating a false sense of loud humming of the device, especially for a model with its metal frame, which perfectly resonates and transmits vibration to the hand.
Fortunately, Android’s software shell, paired with its HyperOS or MIUI firmware, provides flexible tools for managing tactile feedback. You don’t have to put up with constant shaking under your fingers if you prefer silence or use third-party printing apps. In this article, we’ll take a look at all the ways you can eliminate this feature, from basic settings to hidden menus.
It is worth noting that turning off keyboard vibration does not affect other system notifications, which allows you to maintain important tactile control over calls and messages. We will look at the nuances of working with the virtual keyboard Google Gboard, which is the standard for most Xiaomi devices, and also touch on the system parameters that can duplicate this effect. X3 Pro is much more comfortable.
Basic configuration through the MIUI system menu
The first and most obvious step, often overlooked, is the general settings of the sound and vibration of the smartphone itself. The MIUI system has a separate switch that controls the tactile response of the system as a whole, which sometimes overlaps the individual settings of applications. To get to this section, you need to open the main settings menu and find the item associated with the audio.
Inside the Sound and Vibration menu, you'll need to scroll down to the extra settings block, and there's often a touch-touch toggler that activates a short pulse when you press any interface elements, including the keyboard buttons, if they don't have their own priority settings, and turning that off can instantly solve the problem without going deep into the keyboard menu itself.
⚠️ Warning: Disabling system vibration in this section can remove tactile response not only on the keyboard, but also when dialing a number in a call or pressing the system navigation buttons.
If you want to leave the system vibration for other actions, but remove it when you print, you need to move to the settings of a particular input application. Often users confuse these two levels of control, which leads to incomplete shutdown of the function. Make sure you understand the difference between global system sound and local settings Gboard.
Disabling vibration in the Gboard app
Since the Poco X3 Pro defaults on a Google keyboard, the main method of combating jitter is inside the settings of the Gboard app itself.This method is the most preferred one, since it allows you to fine-tune the vibration force or turn it off completely without affecting it.
You can use the other functions of the phone. First, call the keyboard in any text box to access it.
In the keyboard toolbar, find and tap the settings icon (usually a gear) or press the space to call the menu. In the list that opens, select Settings, then go to Settings (or Preferences), where the keyboard's basic behaviors are located, and that's where the switch is hidden.
You need to find the Vibration option when you press the keys. Newer versions of Gboard may have a slider next to this point that regulates the duration of the vibration. A full shift of the slider to the left or turn off the tumbler is guaranteed to stop the tactile response, and this solution works regardless of which input language you use.
☑️ Checking Gboard settings
So if the vibration comes back after another system or application update, the algorithm must be repeated, which is the standard behavior of the software to apply new parameters.
Controlling Vibration Force and Duration
Not all users want to get rid of tactile sensations completely, some just need to make them less intrusive. In modern versions of Xiaomi firmware and the shell of Android 12/13/14, it is possible to adjust the vibration intensity, which allows you to find a balance between a complete lack of reaction and excessive humming, which is characteristic of the powerful vibrator in the Poco X3 Pro.
To access these parameters, you often need to go to advanced settings. In the Sound and Vibration menu, look for Sound Quality and Vibration or something similar. There may be a slider that regulates the overall vibration strength of the system. Decreasing this setting will automatically reduce the response strength of the keyboard if it does not have its own rigid limit.
The Gboard keyboard itself also has the ability to adjust the duration of the vibration, so if the slider is set to a minimum but not turned off, the keyboard will give off a very short, barely noticeable pulse, which could be the perfect solution for those who are used to typing blindly and need minimal press confirmation, but do not want to feel prolonged tremors.
| Setup parameter | Location. | The effect | Recommendation |
|---|---|---|---|
| System vibration. | Settings → Sound and vibration | It affects all interface touches. | Leave it on for navigation |
| Gboard vibe | Gboard → Settings → Settings → | Only when printing the text | Disable or reduce to a minimum |
| Duration of response | Gboard → Settings → Vibration | Adjusts pulse length | Minimize (0 ms) |
| Pressing sound | Gboard → Settings → Settings → | Audio accompanying the click | Disconnect with vibration |
Hidden codes for vibration testing
Use of the "Do Not Disturb" and "No Sound" modes
There is a scenario where the user needs to temporarily, not permanently, get rid of the vibration of the keyboard, such as during a meeting, in a movie theater or at night, in which case you do not need to go into deep settings, just use the standard silence modes that the Android operating system offers.
When Do Not Disturb is activated, the smartphone blocks most audible and tactile notifications. However, the keyboard behavior in this mode can vary depending on the version of MIUI. In some configurations, the keyboard vibration turns off automatically, while in others, you need to additionally adjust the Do Not Disturb mode itself, where you need to explicitly allow or prohibit tactile response.
Also worth mentioning is the No Sound mode, which is activated by a volume rocker. If the sound settings (Sound and vibration) have a silent Vibration check, the keyboard can continue to vibrate even when the sound is off. To guarantee that the vibration is removed in this state, you either need to remove this tick or use the previously described methods of shutting down in Gboard.
⚠️ Note: Do Not Disturb mode may have exceptions for certain contacts or apps.Make sure your keyboard vibration settings are not added to the exception list if you want complete silence.
Third-party keyboards as an alternative
If standard Gboard customization methods seem uncomfortable or the functionality doesn’t suit you, there’s always the option of installing an alternative keyboard from the Google Play Store. There are many applications, such as SwiftKey, Typewise or minimalist Open Source solutions, that offer more flexible tactile response management.
Many third-party keyboards allow you to create separate profiles, such as setting up a Night profile with all vibration and sound disabled, and a Job profile where tactile response is enabled. Switching between profiles can take seconds, which is much more convenient than digging through the system menus each time.
When you install a new keyboard, Android will ask permission to access the input data. This is standard security procedure, since the keyboard technically has access to everything you type. Only choose trusted applications from reputable developers to ensure the security of your personal data on the Poco X3 Pro.
💡
If you decide to change the keyboard, before removing Gboard, configure the new one to the end and make it the main one, otherwise the system can automatically return the standard keyboard when crashes.
Impact of System Updates on Settings
Xiaomi users are well aware that every major MIUI update or upgrade to HyperOS can bring not only new features, but also a personalized reset. After installing the new firmware version on the Poco X3 Pro, be sure to check the sound and keyboard settings, as they can return to factory values where vibration is often on by default.
Developers sometimes change menu structure or rename items. If you can't find a familiar switch, search by settings. At the top of the settings menu, there's a search bar -- just type in the word "vibration" or "keyboard," and the system will tell you the actual path to the desired parameter in the current version of the software.
It’s also worth considering that some vibration bugs can be software bugs of a particular firmware version. If the vibration behaves strangely (e.g., vibrates after releasing a finger or doesn’t vibrate at all, even though the setting is enabled), try clearing the Gboard app cache through the Apps menu → All apps → Gboard → Memory → Clear the cache.
💡
Regularly checking your settings after a system update is the only way to ensure that your smartphone comfort won’t be disrupted by resetting your settings.