How to Turn Off Vibration on Xiaomi When Pressed: The Complete Guide

Modern Xiaomi and Redmi smartphones are full of tactile feedback that is designed to confirm your every action. However, for many users, the constant jitter of the body becomes not an assistant, but an intrusive irritant that prevents you from focusing or using the device comfortably in silence. The question of how to turn off the vibration on the xiaomi when pressed becomes especially relevant when the phone vibrates even when you lightly touch the screen or type.

In MIUI and the new HyperOS, tactile response settings are spread across different menus, which often causes confusion: some sliders are responsible for system sounds, others are responsible for keyboard operation, and others control the tactile engine when dialing. Complete shutdown requires sequential passage through several settings to exclude all possible sources of vibration.

In this article, we will take a look at all the techniques for tactile response management, where the hidden switches are, how to set up the keyboard, and what to do if the standard methods don’t work. We will look at the nuances for different versions of firmware and models so that you can make your smartphone as comfortable as possible.

Global shutdown of tactile response in the system

The first and most obvious step is to find the master switch that controls the system vibration, which in most cases allows you to instantly remove the response to interface touches, navigation buttons and system notifications, but in new versions of the shell, this parameter can be hidden deeper than expected.

To get started, you need to go to the basic settings of the device. Find the Sound and Vibration section (in some versions it may be simply called "Sound"). This is where the main levers of acoustic and tactical signals are concentrated.

If you're using HyperOS or a fresh MIUI 14, the algorithm may be slightly different. The system tends to personalize the experience, so sometimes it suggests you choose vibration mode instead of just turning on or off, in which case you need to choose the "No" option or completely shift the intensity slider to zero position.

💡

If the system vibration slider is grey and inactive, check if Do Not Disturb or Silent Mode is enabled, as these can block the change in the sound settings.

It is important to understand the difference between the vibration of the call and the system vibration. When you turn off the slider in the basic settings, you often only remove the interface response, leaving the vibrational call active. To be completely calm, you also need to check the settings of the “No Sound” mode, where these parameters are often duplicated.

Keyboard setting: Gboard and standard Xiaomi keyboard

One of the most common causes of annoying vibrations is typing. Every time you type a message or search for information in a browser, the phone's engine makes a microscopic contraction. Xiaomi's standard keyboard and the popular Gboard have their own system-independent settings.

To turn off the vibration on the Gboard keyboard, you need to click on the gear icon in the top of the keyboard or go through Settings → Additional Settings → Language and input. Select “Gboard Settings”, then go to “Settings”. Here you are interested in the section “Vibration when pressing keys”.

For a standard MIUI keyboard, the path may look different. Once you enter the keyboard settings, look for "Sound and Vibration" or "Tactile Impact." In some firmware versions, this option is placed in a separate "Additional" menu. The intensity slider needs to be shifted completely to the left.

It’s worth noting that updating your keyboard app through Google Play or GetApps can reset your settings to standard. If the vibration returned on its own after updating the apps, check the keyboard settings again, a common feature of Google services on Xiaomi devices.

Vibration control in the phone application and when calling

Special attention should be paid to the vibration of dialing in the Phone app and incoming calls, and even if you turn off the system sound, the ringer can continue to vibrate when you press the numbers, a separate parameter that is often overlooked.

Go to the Phone app and tap three dots or gear icons to enter the call settings. Find the dial vibration or the vibration section, where you can turn off the dial keyboard response separately without affecting the vibration of the incoming call.

For incoming calls, settings are in the Sound and Vibration → Vibration menu. Here you can choose Notification Only, Always or Never. You can also set vibration patterns if you want to change the nature of the jitter rather than turning it off completely.

⚠️ Attention: Turning off vibration in the Phone application does not affect the vibration of the alarm clock. You need to check the alarm settings in a separate Clock application, since it takes precedence over the system settings of the sound.

Specific settings for HyperOS and MIUI 14

With the release of the HyperOS shell, Xiaomi reworked the logic of the tactile engine, and it introduced the Adaptive Vibration feature, which changes the response strength depending on whether you hold the phone in your hand or it is lying on the table, which can create the illusion of a “glutting” vibration.

Newer versions of the software have the ability to fine-tune the intensity, so instead of just on/off, you have a slider from 0 to 100. To guarantee that you can remove the vibration, it's not enough to just turn off the switch, you need to make sure that the intensity value is also reset.

HyperOS has also changed the way it works for some models, so they can now be on the Settings path → Sound and Vibration → Additional → Vibration. This section has all the switches for the system, for calls, for notifications and for alarms.

Users who upgrade from older versions of MIUI may experience a conflict of sound profiles, in which case it is recommended to create a new sound profile or temporarily switch to standard mode to reset possible configuration errors of the tactile engine.

Table: Comparison of shutdown paths in different versions of MIUI

Since the paths to settings may vary depending on the firmware version (Chinese, Global, Indian) and the year of release of the device, it is convenient to use a pivot table for quick search of the desired item.

💡

In HyperOS, tactile response settings have become more detailed, allowing you to adjust the vibration force rather than just turning it on or off.

Third-party applications and enhanced capabilities

If standard tools are not enough, third-party apps from Google Play come to the rescue. Software like Vibration Manager or Vibrate Control allows you to create complex profiles where the vibration is turned off only for certain applications or at certain times of the day.

Some applications require root access rights to deeply interfere with engine drivers, which allows you to completely shut down the motor at the core level, which saves battery power, but can be dangerous for inexperienced users.

Using automatizers like MacroDroid or Tasker allows you to customize scripts, for example, the phone can automatically turn off vibration when you connect to your home Wi-Fi or when it's nightfall, even if you forgot to do it manually.

⚠️ Warning: Be careful with applications that require deep resolutions. Only download proven high-rated software to avoid damaging the stability of the system.

Possible problems and solutions

Sometimes users are faced with a situation where the vibration does not turn off, despite all the settings, this can be caused by a software failure, a slider sticking or an application conflict. The first thing you try to reboot the device, this solves 80% of the time glitches.

If the problem persists, check whether the mode is "In the pocket" or "In the case." Some smart cases or proximity sensors can activate vibration when the screen is closed. It is also worth checking the system updates - new patches often fix such bugs.

In rare cases, the problem lies in the hardware: the plume of the vibrating motor can go away, creating a false sense of constant operation or, conversely, not respond to the shutdown commands. If the software methods did not help, it makes sense to contact the service.

FAQ: Frequently Asked Questions