How to disable PatchWall on Xiaomi: The Complete Guide

Users of smart TVs from the Chinese giant often face an intrusive interface that is pre-installed on the default system.This is PatchWall, a launcher that replaces the standard Android TV and offers content from partners, often with advertising banners. For many owners of Xiaomi Mi TV and Redmi TV, this becomes an annoying factor, especially if they are used to the classic Android structure or use their media players.

Disabling or completely removing this component is not as easy as it may seem at first glance, as it is deeply integrated into the shell. MIUI for TV. However, there are proven ways to circumvent the limitations to regain control of the device. In this article, we will discuss all the current ways, from simple settings to use. ADB-team.

It is worth noting that the complete removal of PatchWall is possible only on models with a full Android TV (Global Version), while the versions with PatchWall OS require more complex manipulation. Before proceeding with radical measures, you need to understand what kind of modification of the operating system you are dealing with, since this depends on the choice of strategy.

What is PatchWall and why do you want to shut it down?

PatchWall is a proprietary shell designed by Xiaomi specifically for its TVs. Unlike the standard Android TV interface with its horizontal application series, it uses a vertical recommendation tape that aggressively promotes the content of certain streaming services. For the user, this means constant visual noise and the inability to quickly find the right label.

The main reason owners are looking for a way to disable the Xiaomi patchwall is because of poor interface performance on low-end processors. Heavy graphics and background tape updates often slow down menus, even if the video is playing normally, and many are repelled by the lack of familiar system navigation.

It is important to understand the difference between firmware versions. Global versions often come with a pure Android TV, where PatchWall is only an optional app. At the same time, Indian and some Chinese versions have this launcher built into the core of the system as a must-have, and defining the software version is the first step to success.

⚠️ Warning: Attempting to completely remove system components on TVs with PatchWall version OS This can lead to a brick or a cyclic reboot of the device. Be very careful when using root rights.

Below is a table comparing the main features of the standard Android TV and the PatchWall shell so you can assess the need for changes:

Preparing the TV for modification

Before you start making changes to the system, you need to perform a number of preparatory steps, which will ensure data security and will allow you to roll back changes in the event of failure. First, check the current firmware version in the Settings → About TV section. Write down the build number, as the methods may differ for different versions of MIUI TV.

The second critical step is to activate developer mode. Without this, you won’t be able to install third-party launchers or use ADB debugging. Usually, the path is: go to Settings → About TV → Build and click on Build 7-10 times in a row until you get a message about activating developer mode.

You'll also need to enable USB debugging in the developer menu. Find USB debugging and put the switch in the active position. When you first connect your computer or control app, you'll need to confirm access on your TV screen, so the remote should be on hand.

Method 1: Installation of a third-party launcher

The safest and most common way to get rid of the intrusive interface is to install an alternative launcher. This doesn't remove PatchWall physically, but makes it invisible to the user, running a different interface instead when the TV is turned on. Popular options are Projectivy Launcher, FAT TV or ATV Launcher.

For installation you will need to download APK-file of the selected launcher on a computer or phone, and then transfer it to the TV through USB-a storage device or application for transferring files (for example, Send Files to TV). After installation APK-So, take your time to launch it. First, you need to configure which launcher will be used by default.

Go to Settings. → Annexes → Default apps (the path may vary depending on the Android version). Find Home or Home and select the launcher you have installed. If the system does not allow you to change this option directly, you may need to use the option. ADB-preference-resetting.

• 📺 Projectivy Launcher – lightweight, modern interface, completely free of advertising and requires minimal resources.
• 🚀 FAT TV — Maximum performance, ideal for weak Xiaomi TVs with 1GB of RAM.
• ⚙️ ATV Launcher – the classic look of Android TV sensibly.

After selecting the new default launcher, press the Home button on the remote. If done correctly, the TV should open a new interface. However, in some versions of MIUI, the Home button is tightly tied to the system process, and an additional step through ADB is required to reassign.

Method 2: Using ADB to disable components

If a simple launcher installation didn’t work and the Home button keeps returning you to PatchWall, you’ll need to use a more powerful tool, Android Debug Bridge (ADB), which allows you to send commands directly to the TV operating system from a computer on the same Wi-Fi network.

Install the package first ADB Tools on your computer. Then find out. IP-Open the command line on your PC and type the command to connect: adb connect IP_AREZ TELEVISOR:5555. If the connection is successful, you will see a message “connected to...».

adb shell pm disable-user --user 0 com.miui.patchwall


adb shell pm disable-user --user 0 com.xiaomi.mipicks

These commands force the processes that make the shell work. Be careful: enter the commands accurately, without typos. After you do, restart the TV. If you want to return it as it was, use the command adb shell pm enable. PACKAGE_NAME.

It is worth noting that in some new models 2026-2026 Xiaomi closed the possibility of disabling system packages through standard ADB-In such cases, you can only change the region or wait for patches from the developer community.

Changing the region as a way to bypass restrictions

Interestingly, PatchWall content and functionality are highly region-specific, and users often find that when they switch to India or Singapore, the interface becomes less intrusive or there are additional customization options that are not available elsewhere.

To change region, go to Settings → Device → Region. After the change, the TV may need to reboot. In some cases, this action resets the launcher settings and allows you to install an alternative application as the main one without using complex commands.

💡

When you change region to India, Xiaomi TV settings often unlock the installation of applications from unknown sources without additional confirmation, which simplifies the modification process.

But this is not a panacea: On global firmware, changing your region can cause some local apps to disappear or change the list of available streaming services, and use this method if other methods don’t work, and be prepared for possible changes in available content.

Possible problems and solutions

You may encounter a number of challenges in the process of modification, and it is often the case that after installing a new launcher, the TV starts to work unstable or crashes to the PatchWall desktop after a few seconds, which may be due to a lack of RAM or conflicting versions of Android.

If the TV is “hanging” or went into a cyclic reboot, try to disconnect it from the power supply completely for 1-2 minutes. This will reset the residual charge and can interrupt the loading process of the problem module. In extreme cases, resetting to factory settings through Recovery Mode (pressing the power button and confirmation buttons on the TV case when turned on).

• 🔒 Installation error APK — Check if installation from unknown sources is allowed in the security settings.
• 📉 Interface brakes – New launcher may be heavier than original, try lighter versions).
• 🔌 ADB • Do not see the device – make sure that PC and TV are on the same network, and the firewall does not block port 5555.

⚠️ Attention: When in use ADB-commands to remove system packets risk disrupting the smart functions of the remote or voice search. Always check which packets you disable.

Frequently Asked Questions (FAQ)

💡

The most stable result is a combination of methods: installing a light launcher (for example, Projectivy) and disabling PatchWall system processes via ADB, which provides a clean, ad-free interface.