How to Turn Off Xiaomi TV: 5 Ways to Get Rid of the Tablet

Xiaomi Mi TVs have become popular thanks to a combination of affordable prices and advanced features based on Android TV. However, many users face non-obvious nuances when trying to turn off the device - especially if the remote is lost or the screen is frozen. Unlike traditional TVs, where you just press a button, Xiaomi smart models offer several ways to turn off, each of which has its own characteristics.

In this article, we will look at all possible methods, from standard switching off on the remote to forced shutdown in case of system failures, focusing on standby, which is often confused with full shutdown, and also consider how to reset the settings correctly if the TV stopped responding to commands. If your model is Mi TV 4A, Mi TV 5 or Mi TV Q1, the instructions will fit with minor differences in the interface.

1. Standard button-off on the remote

The most obvious way is to use the original Xiaomi Mi Remote, but even here there are nuances that few people know about: the power button (usually indicated by the icon of a circle with a vertical line) on Xiaomi remotes can work in two modes:

• 🔘 A quick tap puts the TV in Standby mode, where the indicator on the front flashes red and the device consumes the device. ~0.5 watts of power for quick switching on.
• 🔘 Long pressing (3-5 Seconds – on some models (e.g. Mi) TV 5 Pro) completely shuts down the power. The indicator goes out and you need to press the power button again to turn on.

If the short press doesn’t work, check:

• 🔋 Battery charge in the remote (on the back of the remote there is a charge indicator when pressing any button).
• 📶 Distance to TV – the maximum distance for the IR panel is ~8 meters without obstacles.
• 🔄 The presence of interference from other IR devices (air conditioners, music centers).

⚠️ Attention: On Mi models TV 4S And then, a long press of the power button can activate the reset mode, not a full shutdown, and then the screen goes out, but it's not going to shut down. 10-15 The TV will turn on again.

2. switch off the button on the TV body

All Xiaomi TVs have a physical power button located on the bottom or back panel, which can look like:

• 🔘 Separate round button with power icon (on Mi models) TV 4A/4C).
• 🔘 Touch panel with backlight (on Mi) TV 5/5 Pro/Q1).
• 🔘 Combined button Power/Joystick (on some versions for the European market).

Instructions for switching off:

1. Find the button on the body (usually under the Mi logo or side).
2. Press it once to go into Standby mode.
3. To completely turn off, hold the button for 5-7 seconds until the indicator goes out.

On touch-button models (such as the Mi TV Q1 75), you may need to double-task to turn off.

• 🧹 Clean contacts (dust or fat may block the sensor).
• 🔌 Network connection – some models block the button when the power cable is turned off.

3. Software shutdown via the settings menu

If the remote is lost and the button on the case does not work, the TV can be turned off via the system menu, which is suitable for models on Android TV (all Mi TVs, except the earliest versions).

Step-by-step:

1. On the main screen, go to Settings (cog icon).
2. Select the Device and Preferences section → Energy saving.
3. Click Turn Off or Sleep Mode (depending on the software version).
4. Confirm the action by selecting OK.

On some firmware, the path may differ:

If the menu is not available due to a failure, try voice control (if supported): say "OK Google, turn off the TV" or "Switch off Mi TV." This should be connected to the microphone (built-in or through Google Assistant).

💡

If the TV is frozen and does not respond to the remote, try connecting the keyboard or mouse over USB – sometimes this allows you to unlock the menu.

4. Forced shutdown when getting stuck

If the Xiaomi TV is stuck on the logo, does not respond to the remote or power button, a forced reboot will be required, which should only be used as a last resort, as it can interrupt the system update.

Methods of forced disconnection:

• 🔌 Unplug the power outlet is the most reliable, but it's not safe. Pull the power cord out of the socket, wait 30 seconds and turn it back on. On models with built-in batteries (like some Mi Mis). TV Stick: This method will not work – you will need to hold the power button 10+ seconds.
• 🔄 Button combination – some models have Power retention + Volume Down in 10 seconds (similar to reset on smartphones).
• 🖥️ Reset via service menu – if the TV is turned on but hangs on the screensaver, try logging into Recovery Mode (hold on Power). + Menu when switched on).

⚠️ Warning: Forced shutdown during firmware update (OTA) If a progress bar is on the screen with the words Updating... wait until the process is completed (even if it takes more than an hour).

5. set up automatic shutdown (sleep timer)

To turn off the TV automatically, for example, when you fall asleep while watching a movie, use a sleep timer. This feature is available on all Xiaomi Mi TV models and is customized differently depending on the version of the software.

How to set up:

1. Open Settings → Device and preferences → Energy saving.
2. Select a sleep timer (Sleep Timer).
3. Set a time (15 minutes to 4 hours) or select After the current video is completed.
4. Save the settings.

On some firmware, a sleep timer can be turned on by voice command:

• 🎤 "Okay, Google, set a 30 minute sleep timer on Mi. TV"
• 🎤 "Turn off the TV in an hour"

If the timer doesn’t work, check:

• 🔄 Is not activated mode Always enabled in the developer settings (Settings) → On TV. → Build Number – Press 7 times to unlock).
• 📵 Are the devices connected to HDMI function CEC (They can block the shutdown).

💡

The sleep timer only works in idle mode – if you interact with the remote or touch panel, the countdown is reset.

6. Disconnect via Mi Home or Google Home

If you have a smartphone, you can remotely turn off your Xiaomi TV via official apps, which works if your TV is connected to the same Wi-Fi network as your phone.

Through the Mi Home app:

1. Open Mi Home and select your TV from the device list.
2. Click on the icon. ⚙️ (setting) → Management.
3. Select Turn Off or Sleep Mode.

Through Google Home:

1. Go to Google Home and find your TV in the list.
2. Click on the device and select Turn off.
3. If the TV is not displayed, check the connection to one Google account.

To control voice through Google Assistant or Alice, the TV must be linked to your account. If the commands are not working, do:

Settings → Accounts and Login → Add a Google Account

7.Reset to factory settings as a last resort

If the TV is constantly hanging, not turning off or behaving unstablely, a complete reset may be required, which will remove all installed apps, accounts and settings, returning the device to the “out of the box” state.

Reset via menu (if the TV is turned on):

1. Go to Settings → Device and Preferences → Reset.
2. Select Factory Data Reset (Factory Data Reset).
3. Enter. PIN-code (by default 0000, 1234 or last used password).
4. Confirm the reset and wait for the reboot (it will take 5-10 minutes).

Reset via Recovery Mode (if the TV is not turned on):

1. Turn off the TV from the outlet.
2. Press the Power button on the body and, without letting it go, connect the power cord.
3. Hold the button for 10-15 seconds until the Recovery menu appears.
4. With Volume ±, select Wipe Data/Factory Reset and confirm with the Power button.

⚠️ Warning: After the reset, the TV will require re-setting, including a Wi-Fi connection and account login. Xiaomi/Google. Prepare the login data and password from the network in advance.

FAQ: Frequent questions about turning off Xiaomi TVs