How to turn off the flashlight on Xiaomi: the complete guide

The situation when the flashlight on the Xiaomi smartphone lights up on its own or does not want to turn off by standard methods, is quite common among shell users. MIUI This may be due to accidental keystrokes, a system process failure, or the activation of the pocket mode function. LED-The outbreak continues to burn, is the first step to solving the problem without contacting the service center.

In most cases, you can turn off the light stream simply by swiping down the screen or re-pressing the power button, but there are nuances that require more in-depth intervention in the system settings. In this article, we will discuss in detail all possible scenarios, including software failures, third-party applications and hidden gesture functions that can interfere with the normal operation of the device.

If you're faced with a flash burning constantly and heating the case, the first thing you need to do is check the state of the software. Often the problem is not the hardware, but the conflict of processes controlling the camera or system notifications. Below are proven methods to help you regain control of the lighting of your gadget.

Standard methods for controlling a flash through a curtain

The most obvious and quick way to turn off a flashlight is to use a control panel known as a curtain. On Xiaomi, Redmi and POCO smartphones, this interface element usually contains an icon in the form of a flashlight. To access it, you need to swipe from top to bottom once or twice, depending on the configuration of the display of the controls.

If the icon is active (lit), one touch should deactivate the LED. However, sometimes the system can "hang" and the visual indicator will burn, but the light will not turn off, or vice versa. In such cases, try to change the mode of operation of the lamp if it is provided by the model, or simply turn it off and turn it on again through the same interface.

⚠️ Warning: If the smartphone continues to heat up in the camera area after the light is turned off through the curtain, then the process has not been completed completely.

It is important to note that different versions of the MIUI shell may have different locations. In some builds, the flashlight icon may be hidden in the second page of the Quick Settings menu. To add or remove it, click on the pencil icon or tripod in the corner of the curtain and edit the list of available widgets.

Control through side button and gestures

One of the popular features in the Xiaomi ecosystem is to turn on the flashlight by double-pressing the lock button, which is convenient, but often causes the lights to be activated accidentally in your pocket or bag, and to turn off this feature, you need to go to the device settings and find the appropriate item.

The path to setup usually looks like this: Settings → Additional functions → Pocket mode or Settings → Lock screen. You should find the option "Turn on the flashlight double-click" and put the switch in the inactive position. LED-module.

• 📱 Open the settings menu of your smartphone.
• 🔍 In the search by settings, enter the word "lantern" or "locking".
• 🚫 Find the item associated with the double click and turn it off.
• ✅ Check the result by pressing the power button twice quickly.

Also worth noting is the screen-off gestures, some users accidentally activate light signals when trying to unlock the device, and if the problem persists, try temporarily disabling all control gestures to detect a conflicting feature.

The impact of third-party applications on the camera

Often the reason the flashlight doesn't turn off is because of third-party apps that have access to the camera or flash, which can be scanning software. QR-codes, flashlights with advanced functionality, voice recorders or even some messengers that use light for video calls.

If standard methods don't work, check the list of recently launched apps. Go to Settings → Apps → All apps and see the list. Pay special attention to the programs you installed shortly before the problem occurred. Try to force them to stop or delete them.

In some cases, malware may disguise itself as system processes. If you notice that the flashlight lights up without your knowledge and drains the battery, it is recommended to scan the device with built-in Security antivirus or a third-party solution.

System failure and process reboot

Sometimes the problem is purely software-based, and it involves a system process that controls hardware components. In a MIUI-based Android operating system, it is often the mediaserver or the camera driver itself, and a simple smartphone reboot solves the problem 90 percent of the time.

If a normal reboot doesn’t work, you can try a more radical method, forced reboot, which requires most Xiaomi and Redmi models to press the power button and hold it for a while. 10-15 So, the second it vibrates, and the brand logo appears, is the same as taking the battery out on old phones.

⚠️ Warning: Do not use the forced reboot method too often unless urgently needed.Frequent abrupt shutdown can damage the file system.

Once the device is turned on, check the flashlight immediately, and if it caught fire on its own when you boot the system, then the problem is that it is autobooting some service, in which case the safe mode that allows you to start the phone only with system applications will help.

💡

To enter Safe Mode on Xiaomi: Turn off the phone, then turn it on and when the Mi logo appears, press the volume down button. Release when you see the message "Safe Mode".

Settings of pocket mode and sensors

Pocket Mode is designed to prevent accidental taps when the phone is in your pocket, but a misfunctioning proximity sensor can have the opposite effect: the phone thinks it's in your pocket, turns on the flashlight as a signal or simply activates it because of a logic failure.

To rule out this factor, go to Settings → Lock and Protection → Pocket mode and try to turn off this feature. If after that the flashlight stops turning on spontaneously, then it was the sensor, in which case it is also recommended to check whether the upper end of the smartphone, where the sensor is located, is not contaminated.

• 🧹 Wipe the top of the screen with a soft cloth.
• 🛡️ Remove the protective glass if it covers the sensor.
• ⚙️ Calibrate the proximity sensor through the engineering menu (code # #64663##).
• 🔄 Restart the device after calibration.

It’s worth noting that new versions of HyperOS have changed the algorithms of the sensors. If you have an updated smartphone, the problem can be solved by installing a security patch, as Xiaomi engineers are constantly working to improve the stability of the iron.

Resetting and extreme measures

If none of the above methods helped to disable the flashlight on Xiaomi, the system configuration files may be damaged. In this case, the last software method is to reset all settings to factory.Be sure to back up important data before this procedure, since all information from the phone will be deleted.

To perform the reset, go to Settings → About Phone → Settings Reset → Erase all data. The system will request confirmation and password from the account. Once the process is complete, the phone will return to the “out of the box” state, and any software conflicts that caused the flashlight to work will be eliminated.

⚠️ Attention: Resetting will not help if the problem is caused by a physical short circuit in the flash power circuit.If after resetting the flashlight burns immediately when the phone is turned on (even before the system boots) - this is a hardware breakdown.

In rare cases, you may need to flash the device through your computer using the Mi Flash Tool utility.This is a complex procedure that requires an unlocked bootloader and skills to work with the device. ADB-If you're not confident in your abilities, you should contact an authorized service center.

💡

If the flashlight is on even when it is turned off or immediately when power is applied before the logo is loaded, this is 100% a sign of a hardware malfunction requiring repair.

Frequently Asked Questions (FAQ)