Calibration of the gyroscope on Xiaomi Android smartphones: the full guide

The gyroscope in Xiaomi smartphones is responsible for determining the spatial position of the device, the correct operation AR-But over time, this sensor can start to lie: the screen turns spontaneously, the games do not respond to tilts, and the camera shakes when shooting. The reasons lie in software failures, mechanical damage or contamination of the sensor.

V 80% So, in cases, the solution is simple calibration of the gyroscope, a procedure that resets the current sensor readings and sets the zero point again, POCO Mi or Mi are struggling with where to find settings, what apps to use, and what to do if calibration doesn't work.This guide provides proven ways for all modern Xiaomi models (including devices on the same platform). MIUI 14/15 HyperOS and diagnostics of hardware malfunctions.

Signs of malfunctioning gyroscope on Xiaomi

Before calibrating, it is important to make sure that the problem is with the gyroscope, not with the accelerometer or magnetometer.

• 🎮 In games, for example, PUBG Mobile or Asphalt 9: The character moves spontaneously or does not respond to the tilts of the smartphone.
• 📱 The screen is turned into portrait/album mode with a delay or in the wrong direction (for example, when tilting to the left - turns to the right).
• 🎥 Video taken on the main camera, shaking even with a stable hand (with the digital stabilizer turned off).
• 🧭 Augmented Reality (Google Measure, IKEA Place) shows objects at the wrong angle.
• 📊 In sensor tests (such as Phone Tester), the gyroscope values float even when the phone is lying on the table.

If you're watching at least 2-3 If you're looking at a sign from the list, it's likely that the gyro needs calibration, but first check if the failures are related to other sensors:

⚠️ Warning: If the malfunctions occurred after a smartphone drop or moisture hit, calibration may not help.

Calibration Preparation: What to Do in Advance

To make the procedure successful, follow several mandatory steps:

1. Check the version. MIUI/HyperOS. On old firmware (below) MIUI 12) There may be no built-in calibration menu. Update the system to Settings → The phone. → Updating the system.
2. Turn off the energy saving modes. Go to Settings. → Battery → Battery mode and select Performance. Energy saving can block sensor access.
3. Make sure the smartphone is on a flat surface. To calibrate accurately, you need a perfectly horizontal plane (like a table or floor).
4. Background processes (especially games or navigators) can interfere with reading data from the gyroscope.

Also prepare:

• 📱 Battery charge of at least 30% (at a discharge below 15%, the system may interrupt calibration).
• 🔌 Cable USB (In case you need a connection to a PC for diagnosis).
• 📲 Application for testing sensors (for example, Sensor Test or Sensor Test) CPU-Z).

Update the firmware to the latest version|Turn off energy saving|Close all background applications|Put your phone on a flat surface|Check the battery charge-->

On Xiaomi models with Snapdragon processor (for example, Redmi Note 12 Pro)+ or POCO F5) Calibration via the engineering menu may require the code ##6484##. on devices with a MediaTek chipset (e.g., Redmi). 10C) This code doesn’t work – use alternative methods.

Method 1: Calibration through hidden engineering menu

The most reliable method is to use the built-in engineering menu, which is available on all Xiaomi smartphones, but the path to it depends on the firmware version and model:

For devices on MIUI 12-15 and HyperOS:

1. Open the Phone app and enter the code: ##6484## on some models (e.g. Xiaomi) 13T) You may need to use #4636## → go to the "Sensors" tab».
2. In the menu, select Sensor Test. → Gyroscope Sensor Calibration.
3. Put your phone on a flat surface (screen up) and press Calibrate.
4. Wait for the process to be completed (usually 10-20 seconds) and the words "Calibration Successful" will appear.

For old models (MIUI 11 and below):

1. Enter the code ##4636##.
2. Go to the “Hardware Testing” tab.
3. Select Sensor. → Gyroscope and follow the instructions on the screen.

If the engineering menu does not open:

• 🔄 Try restarting your smartphone and re-entering the code.
• 📱 Check if the antivirus or security application is blocking access (e.g. Mi Security).
• 🔧 On some firmware, the engineering menu is disabled - use method 2 or 3.

💡

If the gyro is still not working properly after calibrating, try calibrating the accelerometer on the same menu, and these sensors often affect each other.

Method 2: Calibration with applications

If the standard methods didn’t work, use third-party utilities. They are suitable for all Xiaomi models, including Redmi, POCO and Black Shark.

Top.-3 calibration:

1. GPU-Z Sensor (free, no advertising) 📊 Shows data from all sensors in real time. 🔧 It has a built-in function of calibration of the gyroscope. 📱 It runs on Android 8.0 and later.
2. Sensor Test (from Innovative Apps) 🎯 Tests gyroscope, accelerometer and magnetometer. 📈 Builds graphs of sensor readings. 🔄 Supports manual calibration.

Physics Toolbox Sensor Suite

• 🧪 Advanced Diagnostics with Data Export.
• 📊 Visualizes deviations of the gyroscope in 3D.
• 💡 Suitable for professional setting.

If the app shows a Calibration Failed error:

• 🔌 Connect your phone to charge – some utilities require stable power.
• 📵 Turn off mobile internet and Wi-Fi – background data transfers may interfere with the procedure.
• 🔄 Try another app (such as Sensor Test).

Method 3: Manual calibration through ADB (power-user)

If standard methods don’t help, you can try resetting the gyroscope calibration via Android Debug Bridge (ADB). This method is suitable for advanced users and requires a computer.

What you need:

• 🖥️ Computer with Windows/macOS/Linux.
• 📱 USB-cable (preferably original).
• 🛠️ Installed Xiaomi drivers and package ADB Tools.

If you find damage:

• 🛠️ The soldering of contacts will help if the chip legs are gone.
• 💦 Cleaning with alcohol - if there is oxidation, gently wipe the board with isopropyl alcohol (90%+).
• 🔧 Replacing the gyroscope is a last resort, as the sensor is usually soldered into a board. On new Xiaomi models (such as the Redmi Note 13 Pro).+) The gyroscope is often integrated into a single chip with an accelerometer, making it difficult to replace.

⚠️ Warning: Self-repairing the board without experience can cause your smartphone to fail completely.If you're unsure of your skills, contact your Xiaomi Authorized Service Center.

How to check the calibration result

After any of the procedures, you need to make sure that the gyro is working correctly.

Method 1: Testing through an application

1. Install the Sensor Test or GPU-Z Sensor.
2. Open the tab with the gyroscope.
3. Put your phone on the table and look at the readings: 📊 The values of the X, Y, Z axes shall be close to 0.00 (deviation to 0 is allowed). ±0.1). 🔄 When the phone is slowly turned, the charts should change smoothly without jumps.

Method 2: Testing in games

• 🎮 Run a tilt control game (like Asphalt 9 or Real Racing 3).
• 🔄 Check how the car reacts to the inclinations of the device – the movement should be smooth, without jerks.

Method 3: Camera test

• 🎥 Open the camera and turn on the video mode.
• 📱 Keep your phone stable and see if there is any jitter in the image (turn off software stabilization in the camera settings).

If after calibration problems remain:

• 🔄 Repeat the procedure again.
• 📱 Check the work of other sensors (accelometer, magnetometer) – their failures can affect the gyroscope.
• 🔧 Update the firmware to the latest version – in new builds MIUI/HyperOS Frequently correct sensor errors.

Frequent Mistakes and How to Avoid Them

Many users make the same calibration errors, which leads to even more failures.

• 🚫 Calibrate the gyroscope on a soft surface (for example, on the sofa or bed), the sensor should lie on a perfectly flat and rigid plane.
• 🚫 Interrupt the process – if you start calibrating, wait until it is completed, even if it takes more than a minute.
• 🚫 Use unofficial firmware - custom ROM (LineageOS may not work properly with Xiaomi sensors.
• 🚫 Ignore updates in new versions MIUI Often fix sensor bugs.

Typical myths about calibration:

If you followed the instructions, but the gyro is still not working properly, the problem may be:

• 🔋 Discharged battery – at low charge, sensors can give inaccurate readings.
• 🧲 Magnetic interference – remove magnets, speakers or magnetically mounted cases from your phone.
• 📱 Application conflict – some programs (such as Tasker or MacroDroid) may block access to sensors.

FAQ: Answers to Frequent Questions