How to set up screen recording on Xiaomi: from basic settings to advanced chips

Screen recording on Xiaomi smartphones is a useful feature that will be useful for creating guides, streams, saving important moments from games or video calls. MIUI They go beyond a simple "Record" button, depending on the shell version (from the MIUI 12 to MIUI 14) and device models (Redmi Note 12, Poco) X5, Xiaomi 13T Settings may vary, as may available options such as recording system sounds or touches.

In this article, we’ll look at not only the standard way to turn on a recording, but also hidden chips: how to record a screen with internal sound (yes, it’s possible without root!), how to remove the Xiaomi watermark, and why recording can slow down on weak devices like Redmi. 9A. You will also learn what alternative applications should be considered if the built-in recorder does not suit the functionality.

Basic setting of screen recording through the notification panel

The fastest way to start recording is to use the Quick Settings Panel, which works on all Xiaomi devices. MIUI 11 and newer, including Poco and Black Shark. Here's how to do it:

1. Open the notification bar by swiping your finger from top to bottom across the screen.
2. Find the Screen Record icon (usually a dot-in circle or a video camera icon) if it's not there, click on the icon «⚙️ Edit" and add the widget manually.
3. Slip on the icon - the countdown begins (3 seconds), after which the recording starts.
4. To stop recording, open the notification bar again and click on the Screen Record notification or the floating button (if it is enabled).

By default, the video is saved in the folder DCIM → ScreenRecordings in format.mp4 with the resolution corresponding to the current screen resolution. 12S Ultra or Redmi K60 will 2400×1080, It's on budget models like Poco. M5 — 1600×720.

Battery charge (minimum 20%)

Free disk space (1 GB for 5-minute video)

Disabled privacy notices (they may be recorded)

Do not disturb (so that calls are not interrupted)-->

Please note: in MIUI 14 When you first start recording, the system may request permission to record sound (microphone) and display over other windows. Without these permissions, the recording will be without sound, and the floating control panel will not appear.

Extended settings of the recorder in MIUI

Xiaomi's built-in recorder hides a few useful options that aren't visible at first glance to customize:

1. Run the recording through the notification panel.
2. During recording, tap on the floating button (usually in the upper right corner).
3. A menu with additional parameters will open.

Here's what you can set up:

• 🎤 Sound source: microphone, system sound or both (not available on all models).
• 🖥️ Recording permission: from 480p before 1080p (Black Shark 5 is available on the market 1440p).
• 🔄 Frequency: 30 or 60 FPS (on weak chipsets like the Snapdragon 480 60 FPS may cause lag).
• 👆 Show touch: display of circles in places of taps (useful for tutorials).
• 📱 Floating panel: Turning on/off the control button during recording.

On devices with MIUI 13 and newer in the recorder settings, the option “Webcam Recording” has appeared – it allows you to simultaneously record screen and video from the front camera (useful for streamers), but this feature is only available on flagships like Xiaomi 13 Pro or Mix Fold 3.

Just a microphone.

Systemic sound only.

Both at the same time.

I don't record sound.-->

How to record a screen with internal sound (without root)

One of the most common problems is recording the screen without sound from the speakers. MIUI It allows you to record only sound from a microphone, but there is a workaround for recording system audio:

1. Install the SoundAssistant app (available on Google Play or via APKMirror).
2. Run it and turn on the Audio Monitor (or Audio Monitor) option.
3. Return to the screen recording and select the microphone in the sound settings – now the system sound will be recorded.

⚠️ Note: This method does not work on all models. on some devices (for example, Redmi Note 11 with the help of the new model). MIUI 13.0.6) audio may be delayed or distorted, and note that recording protected content (e.g. from Netflix or Disney)+) will be blocked because of DRM.

Alternative way for Poco and Black Shark owners:

1. Connect headphones with a microphone (even the cheapest).
2. In the recording settings, select the microphone as the sound source.
3. Turn on music or video – the sound will be recorded through the headphone microphone (quality is worse, but without delay).

Problem Solving: Lags, black screen, lack of sound

If the screen recording is not working properly, the following problems and their solutions:

1. Recording slows down or breaks

• 🔋 Battery charge below 15% — MIUI It automatically reduces performance.
• 🗑️ Lack of space – free up at least 2 GB on internal storage.
• 🎮 Weak processor - on Redmi 9C POCO C31 lower the resolution to 720p and FPS 30.
• 🔄 Background Processes – Close all applications through Settings → Annexes → Launched.

2. Black screen in the recording

This problem arises when trying to write down:

• 🎬 Protected content (such as movies on Netflix or Prime Video).
• 🔒 Banking applications (SberBank, Tinkoff, etc.).
• 🕹️ Protected games (such as Genshin Impact or PUBG Mobile in some regions).

⚠️ Attention: On devices with MIUI 14 and HyperOS black screen can appear even in regular applications if incognito mode or privacy protection is enabled. → Confidentiality.

3. No sound in the recording.

Check it out.

• 🔇 No Sound Mode – If it is on, the system sound will not be recorded.
• 🎙️ Microphone Resolution – Go to Settings → Annexes → Permits → Microphone and enable access to "Screen Recording».
• 🔊 Media Volume – If it is at zero, the sound will be recorded as “empty».

💡

If the sound is recorded with noise, try turning off the Sound Improvement feature in the microphone settings (Settings) → Sound. → Improvement of microphone sound).

Alternative applications for screen recording

If Xiaomi's built-in recorder doesn't suit you, consider third-party apps that offer more features: webcam recording, on-screen drawing, streaming on YouTube or Twitch.

It's better to choose for games AZ Screen Recorder or DU Recorder – optimized for high-quality recording FPS. And if you want a minimalist recorder without unnecessary features, try ScreenCam (easily weighs only 5 MB).

⚠️ Attention: On devices with MIUI 14 and HyperOS, some applications (such as Mobizen) may not record sound due to new security restrictions, in which case only SoundAssistant or root access will help.

💡

App sidelines often offer more features, but may conflict with optimizations MIUI. If the recording is slowing down, try to disable "Acceleration" MIUI" in the developer settings (Settings) → The phone. → Version. MIUI → 5 times to tap).

How to remove Xiaomi watermark from recording

By default. MIUI Adds the Xiaomi logo or model name to the top right corner of the recording (e.g., "Recorded by Redmi Note 11:

Method 1: Through the recorder settings (not on all models)

1. Run the screen recording.
2. Slip on the floating button and select ⚙️ Settings.
3. Find the Watermark option and turn it off.

This method works for MIUI 13/14, It may not be available on a budget model like Redmi. A1.

Method 2: Video clipping

If the watermark does not turn off, crop the video using:

• 🎬 CapCut (free, there are templates for cropping).
• 📱 InShot (convenient for quick cropping on the phone).
• 💻 Shotcut (for PC, supports) 4K).

To trim the watermark without loss of quality:

1. Open the video in CapCut.
2. Select Cut and set the aspect ratio 16:9.
3. Move the frame so that the watermark is outside.
4. Export the video with permission 1080p.

On devices with MIUI 14 and HyperOS watermark can appear even after turning off in the settings, in which case only root access or writing through a third-party application will help.

Screen recording for streaming and games

If you stream games (Genshin Impact, Call of Duty Mobile, Honor of Kings) or live stream, the built-in Xiaomi recorder may not be suitable due to restrictions on the Internet. FPS Here's how to set up a streaming record:

1. Optimal settings for games

• 🎮 Permission: 720p (Even on flagships like Black Shark 5 Pro 1080p may cause lag).
• 🔄 FPS: 60 if the game supports).
• 🎤 Sound: microphone only (systemic sound from games is often blocked).
• 👆 Touch: Turn on if you show gameplay.

2.The Best Apps for Streamers

For professional streaming, use:

• 📱 Streamlabs Mobile – Integration with Twitch, YouTube, TikTok Live.
• 🎙️ Omlet Arcade – Optimized for mobile games, there is a chat for viewers.
• 🕹️ Mobcrush – supports recording from webcam and microphone at the same time.

⚠️ Note: On Xiaomi with MediaTek processors (like the Redmi Note 12 on Dimensity 1080), streaming apps can overheat the device. → Battery → Battery status.

💡

Before streaming, turn on the performance mode in the battery settings (Settings) → Battery → Performance mode. This will reduce lags, but increase battery consumption.

FAQ: Frequent questions about screen recording on Xiaomi