Adjusting the display correctly is a critical step after purchasing new equipment, as factory settings are often focused on in-store demonstrations rather than comfortable home viewing. Too high a pixel glow intensity can cause quick eye fatigue, especially when watching movies in the evening, while insufficient lighting makes the picture fade and expressionless. Owners of Xiaomi Mi TV and Redmi TV often face the need to manually adjust these values to achieve the perfect balance between shadow detailing and bright areas.
Modern panels, whether LCD, LED or more advanced QLED, require a customized approach to calibration depending on the lighting conditions in the room. Standard image modes such as "Cinema" or "Sport" only partially solve the problem, but fine tuning through an engineering menu or advanced settings allows you to unlock the full potential of the matrix. In this article, we will discuss in detail all the available ways to control the backlight so you can customize the Xiaomi TV as efficiently as possible.
Basic methods of controlling screen illumination
The first thing that the user needs to do is to understand the difference between the software settings of the Android TV operating system and the physical parameters of the matrix. The change in brightness through the standard remote menu affects the software algorithm for processing the video signal, whereas deep calibration affects the operation of the backlight LEDs. For most use cases, there are enough basic adjustments available immediately after the device is turned on.
It is important to understand that automatic modes often work incorrectly due to the peculiarities of the light sensors, which can be glued or located inconveniently. Manual control allows you to fix the desired values and avoid sharp jumps in contrast when changing frames or changing the outside light in the room. This is especially true for models with HDR support, where dynamic range requires stable backlighting.
⚠️ Note: Do not set maximum backlight values on a consistent basis if you watch TV in a dark room, as this can cause the matrix to burn out unevenly over time.
There are several levels of access to image settings, from the quick menu called by the button on the remote to the deep settings in the All settings section. Each level gives a different degree of control over color reproduction and contrast, and beginners are encouraged to start with basic presets, gradually moving to manual calibration as needed.
Configure through the main menu and remote control
The fastest way to change the display settings is to use a context menu that is triggered by pressing a special button on the remote control. On Xiaomi devices, this is usually a button with a gear or a button "Menu", and in the window that appears, you will see sliders responsible for the main characteristics of the picture, including the level of glow of the screen.
To get more detailed, you need to go to the full settings interface. To do this, click the menu button and select Settings, then look for Image or Picture, and here are all the tools available to adjust the visual range, including color profiles and temperature regimes.
☑️ Checking basic settings
Inside the image settings section, you'll find a few key parameters that affect the final picture: Don't change all the values at once, you'll better adjust them sequentially, watching the changes in the test video. Pay special attention to Backlight, which directly controls the power of LEDs, and Brightness, which often affects the level of black.
- 📺 Image Mode: Select Preset “Cinema” or “Customer” for the most accurate color rendering, avoiding “Bright” or “Shop” mode».
- 🌗 Backlight: the main regulator of LED power, affects the overall luminosity of the screen regardless of the content of the frame.
- 🌑 Contrast: Determines the difference between the lightest and darkest parts of the image, affecting the depth of the image.
- 🎨 Saturation: responsible for the intensity of colors, with excessive increase in which people's faces can acquire an unnatural orange hue.
After making changes to the settings, it is recommended to save them as a user profile if your Redmi TV or Mi TV model supports this feature, allowing you to quickly switch between modes for day and night viewing without having to recalibrate manually each time.
Extended parameters and color calibration
For users who want to achieve maximum color accuracy, advanced settings are available, hidden in the sub-menu "Additional settings" or "Expert Settings", and you can find tools to calibrate color temperature, gamut and control local dimming, if the TV matrix supports Local Dimming technology.
One of the most important features is color temperature adjustment. The standard value for the film industry is 6500K, which corresponds to warm white. Many users tend to choose cold shades, but for long-term viewing and maintaining eye health, it is better to use warm or standard mode.
What is a gamma correction?
Also in advanced settings, dynamic contrast is often found, which automatically increases brightness in light scenes and decreases in dark ones. While this sounds useful, in practice, the algorithm often works incorrectly, creating artifacts and knocking out details in light areas.
| Parameter | Recommended value | Impact on the image |
|---|---|---|
| Color temperature | Warm/6500K | Natural colors, less tiresome eyes |
| gamma | 2.2 or 2.4 | Black Depth and Detail in Shadows |
| Dynamic contrast | Off | Removes unnatural brightness surges |
| Noise suppression | Min/Off | Keeps the clarity of details, removes the "porridge" |
Using calibration videos available on YouTube or special discs will help set these parameters as accurately as possible.Look for test videos with gray gradients and color tables to make sure the TV doesn't cut off important shades.
HDR and Dolby Vision Modes on Xiaomi TV
Modern Xiaomi TVs are actively supporting high dynamic range formats HDR10 and Dolby Vision. When you play content that supports these standards, the TV automatically switches to the appropriate mode, ignoring the usual brightness settings, this is done in order to display the picture exactly as the director intended.
But even in the mode HDR The user has the ability to adjust the image, usually when you start it. HDR-In the corner of the screen, a notification appears that you have entered a special mode. If you press the menu button at this point, you will open the settings that are specific to the user. HDR. You can adjust the overall brightness here. HDR and level of detail in lights.
⚠️ Note: In Dolby Vision mode, settings may be limited by the manufacturer, as this format requires strict compliance with color reproduction and brightness standards.
If the HDR image seems too dim, check if HDR+ or a similar option to artificially extend dynamic range for regular content is enabled. It tries to mimic the HDR effect by increasing brightness and saturation, but the result may look unnatural. For movies, it is better to use native HDR content from streaming services or Blu-ray discs.
Resolving problems with a dim or flickering screen
Sometimes users are faced with a situation where the brightness slider is twisted to the maximum, but the screen still remains dim.This can be caused by several factors, including activated power saving mode. In Xiaomi TVs with Android TV operating system, this mode can automatically lower the backlight to save electricity.
To turn off the energy saving, go to Settings -> General -> Eco or Energy Saving. Make sure the switch is in the off or Min position. It's also worth checking for a light sensor: if it's contaminated or closed with a decorative frame, the TV may think it's in a dark room and understate the brightness.
- 🔋 Eco Mode: Turn off any power saving features in the Settings menu completely.
- 🌡️ Overheating: If the TV overheats, the system can automatically lower the backlight brightness to protect components.
- 🔌 Power: Using a non-original power supply (in portable models) may not deliver enough power for maximum brightness.
In rare cases, the problem may be a software failure: rebooting the TV by completely disconnecting from the network for 1-2 minutes helps to reset temporary errors in the operation of the backlight controller. If the problem persists after resetting the settings to the factory, there may be a hardware malfunction.
💡
Use the Xiaomi TV Remote app on your smartphone for more precise customization if the remote buttons stick or work incorrectly.
Specifics of settings for gaming consoles and PC
When connecting a game console or computer to a Xiaomi TV, it is important to activate Game Mode, which minimizes input delay (Input Lag), but also changes the image processing algorithms, which can affect perceived brightness and contrast. Game mode image settings are often stored separately from settings for TV channels or applications.
Not only is brightness important for games, but also the clarity of moving objects. Turn on Motion Flow or Motion Improvement, but set it to a minimum value to avoid the soap opera effect. Excessive frame interpolation can interfere with dynamic shooters, creating artifacts around objects.
If you use the TV as a monitor, make sure that the resolution and refresh rate in the Windows or console settings match the native panel settings. Improper resolution can blur the image, which is visually perceived as low brightness and contrast.
💡
The game mode sacrifices some post-processing for the sake of response speed, so the picture may seem less “smooth”, but the control will become more responsive.