Full setup of Xiaomi Poco X3 Pro: From First Enablement to Hidden Functions

Xiaomi Poco X3 Pro remains one of the most popular smartphones in the lineup POCO Thanks to the powerful Snapdragon 860 processor, 120 Hz display and a capacious battery for 5160 mAh. However, "out of the box" the device does not work at full capacity: factory settings MIUI Often optimized for the “average user” rather than for enthusiasts who want to make the most of the hardware, this article will help not only to basic customize the smartphone after purchase, but also to reveal hidden features that even official instructions are silent about.

We’ll figure out how to disable unnecessary Xiaomi services that eat up charge and traffic, set up a 120Hz display to save battery, optimize performance for gaming, and show you how to properly calibrate your battery so it lasts longer. We will pay special attention to the camera setup - after all, even the budget Poco X3 Pro can take great pictures with the right parameters, if you've just unpacked the box or have been using your smartphone for a month, but feel like it's not working like this, this is the guide for you.

1. First Entry and Basic Setup MIUI

After removing the smartphone from the box, many users rush to use immediately, skipping important initial setup steps. X3 Pro will take no more than 10 minutes, but save hours in the future.

At the first turn on stage, the system will offer to select a language, connect to Wi-Fi and log into the Mi Account. There are a few critical points: Don't miss the fingerprint setting - the sensor on Poco X3 Pro is located on the side and works faster than face recognition. Also be sure to activate Find Device in your account settings - this will help lock your smartphone when you steal.

• 🔄 Update the firmware immediately after the first turn on: go to Settings → The phone. → System update. Even if the version seems fresh, security patches often come out.
• 🚫 Turn off the adverts in MIUI: Go to Settings. → Memory. → Settings → Disable recommendations (the item may be called differently depending on the version) MIUI).
• 📱 Select the “Developers” mode in the lock screen settings – this will open access to hidden functions (we’ll talk about them later).

⚠️ Note: If you are buying Poco X3 Pro with hands, be sure to reset to factory settings via Settings → Additionally. → Recovery and reset: The previous owner may have left a linked Mi Account, which will block access to some features.

2. Display optimization: 120 Hz vs battery

One of the key advantages of Poco X3 Pro is a 120Hz refresh rate display, but the high frequency increases the load on the processor and battery. MIUI setting 60Hz to save charge, but it's not always justified.

To manually adjust the balance between smoothness and autonomy:

1. Go to Settings → Display → Screen refresh rate.
2. Select Auto mode (the system will switch between 60Hz and 120Hz depending on the task).
3. For maximum savings, set 60Hz, but note that scrolling and animations will be less smooth.

Secret Life Hack: at Poco X3 Pro can enable adaptive synchronization, which will adjust the frequency to the content:

1. Activate Developer Mode (7 times click on the MIUI version in Settings → About Phone).
2. Back to Settings → Additionally. → For developers.
3. Find the Minimum Update Rate and set 60 Hz.
4. Enable Adaptive Synchronization (if there is a point in your version) MIUI).

💡

If the screen starts to "swipe" when scrolling, try turning off animations: in Settings → Additionally. → For developers, set the scale of window animation, the scale of transition animation and the scale of the animator duration on the Off.

3. Performance settings for gaming and multitasking

Poco X3 Pro on Snapdragon 860 is great for modern games like Genshin Impact or Call of Duty Mobile, but for stable 60 games. FPS You need to set up the system properly. The first thing you need to do is turn off the background processes that steal resources.

Follow this checklist:

For fine-tuning graphics in games:

1. Install the Game Turbo app (pre-installed in the MIUI).
2. Start the game, swipe from left to right to open the Game Turbo panel.
3. Select a Performance Profile and Activate 4D-vibration (if tactile recoil is needed).
4. In the game settings set 60 FPS and HDR (if maintained).

⚠️ Warning: If there are slowdowns in games, check the temperature of the processor. X3 Pro prone to trottling when heated above 45°C. Use a cooling case or lower your graphical settings.

For enthusiasts, you can overclock the processor through the engineering menu, but it will remove the warranty and increase battery wear.

1. Install MTK Engineering Mode from the Play Market.
2. Move to the MTK Settings → Hardware Testing → CPU.
3. Increase the frequency of the cores by 5-10% (no more!).

💡

Performance mode in Game Turbo automatically disables background processes and optimizes cooling, but reduces battery life by 15-20%.

4. Extending battery life: calibration and charging settings

Battery at 5160 mAh in Poco X3 The Pro sounds impressive, but without the right setup, real life rarely exceeds 1.5 days. The main charge eaters are background processes, unoptimized applications and improper charging mode.

The first thing you need to do is calibrate the battery, and this will help the system to better map the charge level.

1. Reduce the phone to 0% (until it turns off).
2. Connect the original RAM and charge up to 100% without interruptions.
3. Disconnect from the network and again discharge to 0%.
4. Repeat the charging-discharge cycle again.

After that, the charge data will be more accurate.

Then set up the charging modes:

• 🔋 Enable Adaptive Charging in Settings → Battery → Battery settings – this will slow down battery wear.
• ⚡ Turn off overnight fast charging: Constant overheating shortens battery life.
• 📊 Use Charging Schedule: In the same battery settings, set a limit of up to 80% for everyday use.

5 Hidden MIUI features you didn't know about

MIUI It hides a lot of useful features that are not obvious at first glance. X3 Pro:

• 🎵 Double touch to wake up: turn on Settings → Display. → Double tap to wake up. Now you don't have to press the power button to unlock the screen.
• 🔍 Screen search: swipe down the main screen and enter a request – the system will find applications, contacts and even settings.
• 📲 "Second Space" mode: in Settings → Special facilities → Second space can be created with a separate work profile with other applications (useful for work or privacy).
• 🔊 Amplification of sound in headphones: in Settings → Sound. → Sound effects → Headphones, turn on the sound amplifier.

For experimentation lovers:

1. Include navigation gestures in Settings → Display. → Full screen mode and select Swape up from bottom (like on iPhone).
2. Activate Reading Mode in Settings → Display. → Reading mode – it reduces blue light and makes text clearer.
3. B Settings → Additionally. → For developers, turn on GPU-acceleration for smoother animation.

⚠️ Attention: Second Space may conflict with some banking applications (e.g. Sberbank or Tinkoff) If payments have stopped working after activation, turn it off.

💡

To quickly turn on the flashlight, double-click on the volume reduction button (setting in Settings). → Buttons and gestures → Fast flashlight launch).

6. camera setup: how to make a better photo

Camera in Poco X3 Pro is not a strong point, but with the right setup, you can get decent results. MIUI, It's a machine that lubricates the parts, and it's a manual adjustment that can fix it.

The main parameters for improving the photo:

• 📸 Turn it on. HDR In the camera settings (the icon in the top menu) this will improve detail in the shadows.
• 🌄 Turn it off. AI-The camera is often wrong with the white balance.
• 🔍 In Pro mode, set it up. ISO on 100–400 and exposure 1/1000 day-shot.
• 🎥 For the video, select permission. 1080p 60fps — It is the best balance between quality and file size.

For shooting in the dark:

1. Use Night mode, but keep your phone as still as possible (better with a tripod).
2. In the manual settings (Pro) increase ISO before 800–1600 and 1/10.
3. Turn off the flash - it only spoils the frame at close distances.

If you don’t like the standard camera, install Google Camera (GCam) with Poco support. X3 Pro. You can download the modified version on the forum XDA Developers (look for a top for vayu - the code name of the model). GCam is better at handling. HDR night-time.

7. Cleaning the system from garbage and unnecessary applications

MIUI It's known for clogging the system with pre-installed applications, many of which can't be removed by standard means.

List of safe applications to remove (do not affect stability):

• 🗑️ Mi Browser – can be replaced with Chrome or Firefox.
• 🎵 Mi Music and Mi Video – if you use YouTube Music or VLC.
• 📰 Mi Community and Mi Store are useless outside of China.
• 🎮 Game Center – if you don’t play games from Xiaomi.

To remove system applications:

1. Activate Developer Mode (as described above).
2. Connect your phone to your PC and install ADB Tools.
3. Enter the command: adb shell pm uninstall -k --user 0 com.mi.browser.global (replace com.mi.browser.global with the desired application package).

The list of system application packages can be found on XDA Developers.

⚠️ Note: Do not remove applications with com.android. or com.miui packages. this can lead to unstable system operation.

To clean up cache and debris:

1. Go to Settings. → Memory. → Clean and run a deep cleaning.
2. Install. SD Maid from Play Market to delete residual files.
3. Clean up the Google Play Services cache: Settings → Annexes → Application management → Google Play Services → Memory. → Clear the cache.

💡

Regular cache cleaning (once a month) increases the free space and speeds up the system by 10-15%.

8. Security and privacy setting

Poco X3 Pro collects more data than many users realize.To minimize leaks and protect personal information, follow the following steps:

Shutdown of surveillance MIUI:

• 🔒 Go to Settings. → Confidentiality → Special permits → App permissions and disable location, microphone, and contacts access for unnecessary apps.
• 📍 Turn off Location Improvement in Settings → Additionally. → Confidentiality → Improving location.
• 📊 B Settings → Accounts. → Mi Account → Synchronize: Disable synchronization of unnecessary data (such as notes or calendar).

Additional security measures:

1. Install blocking of applications for instant messengers and banking programs: Settings → Confidentiality → Application lockdown.
2. Include malware protection in Settings → Security.
3. Set up Auto Cleanup in Settings → Memory. → Autoclean so that the system deletes unnecessary files once a week.

For complete anonymity:

1. Install. VPN (For example, ProtonVPN) and enable it in your network settings.
2. Replace your standard browser with Firefox Focus or Brave with tracker locks.
3. Turn off personalized recommendations in Settings → Confidentiality → Personalization.

FAQ: Frequent questions about setting up Poco X3 Pro