Xiaomi Mi TV and Redmi TV are complex computing devices that run on Android TV. As with any computer, setting the system time correctly for apps, browsers and streaming services is critical. An incorrect date can block access to YouTube, Netflix or even prevent security updates from being installed.
Most often, users are faced with a situation where after a power outage, the clock is reset to a standard firmware release date, this is due to the lack of a built-in backup battery or a failure in the NTP network protocol. In this article, we will discuss in detail all methods of synchronization, from automatic to manual methods through hidden menus.
The right time stamp is not only necessary for the convenience of watching TV programs in the EPG guide, but also for the correct logging of system errors. If you notice that the video in the browser does not run with a security certificate error, in 90% of cases the problem lies in the desynchronization of the clock with real server time.
Automatic synchronization through the network
The easiest and most reliable way to set the time is to use automatic synchronization over the Internet. To do this, your Xiaomi TV must be connected to the router via Wi-Fi or a LAN cable. The system will independently contact the time server and set the correct values, taking into account your time zone.
To activate this feature, you need to go to the settings menu. Navigation can vary slightly depending on the version of the PatchWall shell or pure Android TV. Usually the path is as follows: click the settings button on the remote, select the General or System section, then find the Date and Time item.
⚠️ Note: If automatic synchronization is enabled, but time is constantly lost after rebooting, it is possible that your router has blocked ports for the rest of the router. NTP-The protocol or the wrong date on the router itself.
In the menu that opens, make sure that the "Use Network Time" or "Automatically" switch is in the active position. The system should immediately pull up the data. If this does not happen, try temporarily disabling and re-energizing the switch. Also check if the city or time zone is correctly selected at the next menu item.
It's important to understand that to do this, the TV needs to have access to the global network, so if you have a limited tariff or parental filters that block system requests, you won't sync, and then you'll have to switch to manual settings.
Manual date and time setting
If the automatic mode is not working or you prefer full control of the system, you can set the parameters manually, this method is especially relevant for models that do not have constant Internet access or are used on LANs without access to the outside world.
First, you need to deactivate automatic synchronization. → Date and time, move the AutoDetermination switch to off. After that, the date and time fields will become active for editing.
- 📅 Use the navigation buttons on the remote to select the year, month and day, confirming the choice with the button OK.
- ⏰ Precisely set the hours and minutes by focusing on the time on your smartphone or computer.
- 🌍 Make sure the time zone is chosen correctly, otherwise there will be confusion when switching to winter/summer time (if applicable.
Some users prefer to set time ahead or lag, but for the work of streaming services this is critical. SSL/TLS security certificates used by sites have a strict time range of validity. If the time on the TV differs from the real one by more than a few minutes, the browser will consider the connection unsafe.
☑️ Pre-manual check
The problem of resetting time after switching off
One of the most common complaints of Xiaomi TV owners is the time reset to factory values (for example, January 1, 2015) after the device completely shuts down, which is due to the fact that most modern TV panels do not have a separate battery-pill to power a real-time watch (RTC) in the off state.
When you pull the cord out of the socket or use a smart socket to completely shut down the power, the clock's memory is zeroed. The next time you turn on, the TV tries to sync, but if the Internet has not yet been connected or the server is not available, the system starts with a default date, which can lead to errors in the application.
⚠️ Attention: Constant full power reset (cord pulling) is harmful to the TV's flash memory. Try to use standby mode (power button on the remote) so that the system can support internal processes.
The solution may be to set up a quick start or not to completely shut down, and it is also worth checking the router's settings: if it distributes DHCP-lease (rental). IP) slow, the TV may not have time to load the interface. IP-addressing.
Why is this happening on Android TV?
Configure through hidden engineering menus
For advanced users who can't solve a problem with standard methods, there are hidden engineer menus, which can be used to find more detailed network stack settings and forced synchronization. Be careful: changing unknown parameters can lead to unstable system operation.
To get into the engineering menu, you often need to use third-party applications such as TV Assistant or through the input of special commands into the console if you have ADB installed. The standard remote path for most global firmware versions is not provided.
However, some versions of PatchWall use a method of quickly pressing buttons on the remote in the main menu, such as Up, Up, Down, Down, Left, Right, Left, Right (as in older games) sometimes opens up access to advanced settings. If the menu opens, look for the Time Setting section.
| Parameter | Description | Recommended value |
|---|---|---|
| NTP Server | Time server address | pool.ntp.org or time.google.com |
| Time Zone | Shifting away from UTC | UTC+3 (for Moscow) |
| Sync Interval | Check interval | 24 hours. |
| Format | Display format | 24h (European) |
Change of address NTP-servers on a more reliable one (such as Google servers or Yandex servers) often help to solve the problem if the manufacturer’s standard servers are blocked or are slow in your area.
Use of applications for synchronization
If the operating system's built-in features fail, third-party apps come to the rescue from the Google Play Store. There are utilities designed specifically for Android TV that force system time with the necessary access rights.
One popular solution is Date & Time Sync, which can run in the background and periodically check the clock’s accuracy when needed, and is especially useful for TVs that rarely turn off completely and go into deep sleep.
- 📲 Install the application from the official app store.
- ⚙️ Give the necessary permissions to change system settings.
- 🔄 Set up an automatic time check schedule (e.g., every 12 hours).
💡
If the Google Play Store is not opening due to a time error, try installing it. APK-application file for synchronization via flash drive.
It is important to download applications only from trusted sources. Malware masquerading as system utilities can steal your Wi-Fi network data. Always check developer ratings and user reviews before installing.
Diagnostics of network problems
Often the root of the problem lies not in the TV itself, but in the network configuration. NTP (Network Time Protocol) uses port 123 (UDP), and if your ISP or network administrator blocks this port, synchronization is impossible.
For diagnostics, you can try pinging a time server. On TVs with the ability to install file managers with a terminal (for example, X-plore with a Telnet plugin or through ADB from a computer), you can run a communication check command, which will help you to understand whether the device sees the time server.
ping pool.ntp.orgIf packets are lost or no response, the problem is on the network side. DNS Your router or TV itself public addresses: 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare). DNS-The server solves the problem of unavailability of system services.
⚠️ Attention: When changing DNS-Make sure you don’t use specific corporate or child access profiles that can filter your TV’s system requests.
💡
Shift. DNS-Public server (8.8.8.8) solves 80% of problems with unavailability of time synchronization servers.