Set up time on Xiaomi Mi TV 5: all ways and solutions to errors

Xiaomi Mi TV 5 automatically syncs time with servers over the Internet, but sometimes this feature fails - especially after resetting settings, moving to a different time zone or problems with connecting to the network. Incorrect date and time are not only confusing when watching programs, but can also block the operation of some applications (for example, Netflix or YouTube require the correct time to log in).

In this article you will find all the current ways to adjust the time to Mi. TV 5 (including 55, 65, 75" and Pro versions), and solutions to typical problems: why time is reset after switching off, how to fix the synchronization error and what to do if the TV shows the wrong time zone. MIUI TV 2.0 and later (2021–2026.).

1. Automatic time setting via the Internet

The easiest way is to sync with NTP (Network Time Protocol) servers, so the TV must be connected to a Wi-Fi or Ethernet network with stable Internet access, and if the connection is working but the time is not updated, check the settings below.

How to enable automatic synchronization:

• 📶 Open the Settings. → System system → Date and time.
• ⏰ Switch the slider Automatic date and time to the position on..
• 🌍 Make sure the time zone field matches your region (e.g. Moskva, GMT+3).
• 🔄 If the time is not updated immediately, restart the TV: Settings → On TV. → Reboot.

Important: Some providers are blocking NTP-Router-level queries. If the time hasn't updated after you turn on automatic synchronization, try connecting the TV to another network (for example, via a mobile hotspot smartphone) or adjusting the time manually (see next section).

💡

If the TV is 1 to 2 hours late, check the DST settings in your time zone. In MIUI TV, this option is turned on automatically, but sometimes requires manual adjustment.

2 Manual date and time setting

If automatic synchronization is not working or you want to set the exact time without an internet connection, use manual mode, which is also useful if the TV is used in the office without access to external servers or in an area with a poor signal.

Step-by-step:

1. Go to Settings → System → Date and time.
2. Turn off the Automatic Date and Time option (slider to off position).
3. Click on the Set a date field and select the current date using arrows or a digital keyboard.
4. Click on the Set time field and enter the current time (ChCh:MM format).
5. Check the Time Zone field - when manually set up, it can be lost to GMT+0.

Make sure the date matches the calendar | Compare the time to the reference (e.g., time.is) | Check the time zone (should match the city) |Reboot the TV to apply the changes-->

⚠️ Note: When manually set up, the time on the TV will not automatically update even after you connect to the internet until you turn back on the sync option. This can lead to problems with Google Play, Prime Video and other services that require up-to-date authorization time.

Time zone setting: why the TV shows the wrong time

One of the most common problems on Xiaomi Mi TV 5 is a lost time zone, which occurs after resetting, updating the firmware or if the TV was bought in another region, for example, when buying a model from Europe (where GMT+1 is the default one) in Russia, time will be 2 hours behind.

How to fix the time zone:

• 🌎 Go to Settings. → System system → Date and time → Time zone.
• 🔍 Enter the name of your city in search (for example, Moscow, Yekaterinburg, Novosibirsk).
• ✅ Choose the right option from the list (pay attention to the indication) GMT+3, GMT+5 etc.).
• 🔄 If the time has not been updated after the belt change, turn on and off automatic synchronization (see Section 1).

⚠️ Note: If your city is not listed in time zones, choose the nearest region with the same city. GMT. For example, Moscow is suitable for Krasnodar (GMT+3), and for Omsk - Yekaterinburg (GMT+5).

Automatically over the Internet|Manually.|Never set up.|Other-->

4. Problem Solving: Time is lost after switching off

If the date and time on the Mi TV 5 are reset to factory (January 1, 2016, 00:00) after each outlet, the problem lies in one of three factors:

1. Settled battery CMOS (energy-independent memory that saves settings when power is turned off).
2. A faulty power supply that does not provide backup power to memory.
3. Software failure after firmware update.

How to diagnose and fix the problem:

• 🔋 Battery check. CMOS: Turn off the TV for 5 minutes, then turn it on. If the time is reset, the battery is dead (replacement is required at the service center).
• 🔌 Power supply test: Connect the TV to another power source (for example, through another cable or socket). If the problem disappears, the cable or socket is defective.
• 🔄 Resetting: Perform reset to factory settings: Settings → On TV. → Reset the time once you have reset (see section 1 or 2).

5. synchronize time with other Xiaomi devices

If you have other Xiaomi gadgets (smartphone, smartwatch, speaker), you can sync your TV time with them through your Mi Account account.This is handy if all devices are on the same network and you often move between time zones.

How to sync time with your Mi Account:

• 📱 Make sure that Xiaomi’s smartphone has time synchronization enabled with servers (Settings) → Additionally. → Date and time).
• 🖥️ On the TV, log in to the same Mi Account: Settings → Accounts and security → Add an account.
• 🔄 Enable the option to sync data in the account settings on the TV.
• ⏱️ Restart the TV – Time should be updated within 1-2 minutes.

⚠️ Note: Mi Account sync doesn’t work on all Mi firmware TV 5. If the option is not in the menu, upgrade the TV software to the latest version (see section 6).

💡

Synchronization through the Mi Account is convenient for traveling: when you change the time zone on your smartphone, the time on your TV will be updated automatically (subject to an Internet connection).

6. Update firmware to correct time errors

Older versions of MIUI TV firmware (up to 2.0.150) had time-synchronization bugs, especially when using a VPN or dual internet connection (Wi-Fi + Ethernet). If your TV is running on firmware older than 2022, it is recommended to update the software.

How to update firmware:

• 📥 Go to Settings. → On TV. → Updating the system.
• 🔍 Click Check for Updates.
• 📦 If a new version is available, click Download and install.
• ⚙️ Wait for installation to be completed (TV will restart automatically).

If the automatic update does not work:

• Download the latest firmware for your model from the official Xiaomi Support website.
• Copy the.zip file to a flash drive (FAT32 format).
• Connect the flash drive to the TV and update the software manually through Settings → About TV → Update via USB.

Note: After the firmware update, all settings (including time) will be reset to factory settings.

FAQ: Frequent questions about setting up time on Xiaomi Mi TV 5