How to set up TV on a Xiaomi TV: a complete guide with photos and tips

Set up TV channels on Xiaomi TV — It's a process that seems simple at first glance, and many users have problems ranging from no signal to a poor channel list. In this article, we'll look at all the ways to adjust the airborne system (DVB-T2), cable (DVB-C) satellite (DVB-S) TV on Mi TVs TV 4/5/S/A Pro including models with Google TV We will focus on the typical errors that interfere with the correct operation of the TV, and give practical tips for signal optimization.

It is important to understand that the customization algorithm may vary depending on the firmware version and the region of the TV sale. TV by default activated standard DVB-T, In Russia, a manual choice is required. DVB-T2. We have taken these nuances into account and prepared universal instructions that will work for most scenarios. If you just bought a TV or moved to another region, this article will help you avoid frequent mistakes and save time.

1. Preparing Xiaomi TV for TV setup

Before you start setting up, make sure your Xiaomi is yours. TV It involves checking connections, updating the firmware, and choosing the right signal source, and neglecting these steps often leads to failures in the scanning process.

The first thing to do is to update the software. Outdated firmware may not support current broadcast standards (e.g., broadcasting standards, DVB-T2 In some regions, to check the software version:

1. Open Settings → About TV → Update system.
2. If an update is available, install it by connecting the TV to the Internet.
3. After the update, reboot: Settings → Preferences → Reboot.

Check the physical connections:

• 📡 Antenna: Connect the cable to the connector RF IN (It's usually on the back, and make sure the cable is not damaged or inflected.
• 🔌 Power: Use the original power supply from Xiaomi – unstable voltage can interrupt the setup process.
• 🌐 Internet (optional): For download EPG (Transmission programs) and channel list updates connect to Wi-Fi or Ethernet.

Check the firmware version|Connect the antenna cable to RF IN|Make sure you have a stable diet|Select the right signal source (TV, not HDMI)|Shut down. VPN (if used)

-->

If you use cable TV (for example, from the provider Rostelecom or MTS), check with the operator the settings: frequency, symbolic speed and modulation. This data will be used for manual search of channels (DVB-T2) Automatic scanning is sufficient, but in some regions, you may need to select a specific multiplex.

💡

If the TV can't find any channels, try connecting the antenna through a signal amplifier. In urban environments, interference from other devices (Wi-Fi routers, microwaves) can block a weak TV signal.

2. Automatic setting of the air TV (DVB-T2)

Most of the users of Xiaomi TV Use digital television standard DVB-T2. Automatic channel search is the easiest way to set up, but it requires proper preparation. If you live in an apartment building, the signal may be weak due to distance from the repeater or interference.

To start an automatic search:

1. On the remote, press the Home button and select Settings. → Channels → Tune in TV.
2. Choose the Etheric TV (DVB-T/T2).
3. Specify country: Russia (important for the correct definition of multiplexes).
4. In the Search Mode section, select Automatic.
5. Click Scan and wait until the process is complete (usually takes 5-10 minutes).

If the TV has found less than 20 channels (there must be at least 30 in two multiplexes in Russia), try the following:

• 🔍 Repeat search: Sometimes the first scan misses a portion of the channels due to temporary interference.
• 📶 Check signal strength: In the channel settings menu, select Signal Information. The signal level must be at least 60%. If less, move the antenna closer to the window.
• 🔄 Reset TV settings: Go to Settings → Channels → Reset TV settings and repeat the search.

In the Xiaomi Mi models TV 5 and later, the automatic channel list update feature is disabled by default. To enable it, go to Settings → Channels → Auto-update channels and activate the option.

Manual channel scanning (for power users)

Automatic search doesn’t always work well with customization, especially if you’re using cable TV (DVB-C) satellite-based (DVB-S). In such cases, you need manual configuration, you will need settings from your provider, if you do not know them, contact the support team or search on the official website (for example, for Rostelecom or Tricolor TV).

Instructions for manual search DVB-C (cable):

1. Go to Settings → Channels → TV setup → Cable TV (DVB-C).
2. Choose Manual Search.
3. Enter parameters (example for Rostelecom): Frequency: 298,000 kHz Symbolic speed: 6875 Modulation: 256 QAM

Scan.

For satellite TV (DVB-S) need to:

• 📡 Set up a satellite dish on the desired satellite (for example, Yamal 402 for Tricolor TV).
• 🔗 Enter the transponder parameters (frequency, polarization, flow rate).
• 🔄 Specify DiSEqC (if a switch between multiple satellites is used).

If the channels are not available after manually entering the parameters, check:

⚠️ Attention: In Xiaomi Mi models TV 4A and 4S manually DVB-C You may need to disable the operator network option in the search menu, otherwise the TV will ignore the settings you entered.

4. IPTV setup on Xiaomi TV

IPTV — It's an alternative to traditional television, which broadcasts over the Internet, and many providers, like Wink or Akado, offer this. IPTV In a package with the Internet. To set up on Xiaomi TV There are two ways: through an embedded application or third-party players.

Method 1: Built-in application IPTV (Available on PatchWall models):

1. Open the Apps → IPTV.
2. Enter the data from the provider: login, password and URL playlist (usually ending with a.m3u).
3. Save the settings and wait for the list of channels to load.

Method 2: Third-party applications (e.g, SS IPTV Lazy IPTV):

1. Install the app via Google Play Market (on Google models) TV) or download APK-file USB-accumulator.
2. In the application settings, specify URL Playlist (you can get it from the provider or generate it on sites like iptv-org.github.io).
3. Start the stream and check the stability of the playback.

Advantages of IPTV:

• 📺 More channels: Access to hundreds of international channels that are not on air TV.
• 🔄 Transmission archive: The ability to watch programs in the recording (some providers have).
• 📱 Multiscreen: Synchronization with mobile devices.

⚠️ Attention: When in use IPTV via Wi-Fi, make sure that the Internet speed is not lower than 20 Mbps. Otherwise, stuttering and poor picture quality are possible. For stable operation, it is better to connect the TV to the router via Ethernet cable.

Etheric (DVB-T2)|Cable (DVB-C)|Satellite (DVB-S)|IPTV|I don't use TV.

-->

5. Channel optimization and sorting

Once you've successfully scanned, you'll get a list of channels that often needs reworking. By default, a Xiaomi TV sorts channels by frequency rather than by popularity, which is inconvenient for daily use. Fortunately, the settings have tools for manually sorting, removing unnecessary channels, and creating favorites.

How to sort channels:

1. Go to Settings → Channels → Channel Management.
2. Choose Change the order.
3. Use the Up/Down buttons on the remote to move the channel to the desired position.
4. To remove the channel, select it and press it. OK → Delete.

Additional functions:

• ⭐ Favorites: Mark frequently used channels with an asterisk for quick access.
• 🔒 Parental Controls: Block access to certain channels PIN-code (Settings) → Security → Parental control).
• 📁 Channel Groups: Create thematic folders (e.g. Sport, Children's Folders").

If you frequently switch between different signal sources (e.g., on-air TV and other sources). IPTV), You can set up a quick switch:

1. Press the Source button on the remote.
2. Select the right source (for example, TV air-borne HDMI prefix).
3. To return the original list, click Home. → Settings → Channels → Resetting the source list.

💡

Update your channel list regularly (every 1-2 months) as providers may change broadcast frequencies or add new multiplexes.

6. Solving Common TV Problems on Xiaomi

Even after the right setup, Xiaomi users TV You may encounter problems like no signal, no signal, no channel switching, or poor sound display. Consider common errors and how to fix them.

If Xiaomi TV doesn’t find channels DVB-T2, But you are sure of the serviceability of the antenna, try the following:

1. In the TV settings menu, select Manual Search.
2. Enter multiplex frequencies for your region (e.g., Moscow: 546 MHz and 666 MHz).
3. Set the bandwidth to 8 MHz.
4. Run a search.

For Google models TV (for example, Xiaomi TV A Pro) additional adjustment may be required:

⚠️ Attention: On TVs on Google TV The terrestrial TV function is sometimes hidden. To activate it, go to Settings. → Device and preferences → Channels → TV source and select Ether.

7. Alternative ways to watch TV on Xiaomi

If setting up a traditional TV is difficult or you are not satisfied with the quality of the signal, consider alternative options:

1. TV set-top boxes

• 📦 Xiaomi Mi Box S: Supports the IPTV, DVB-T2 through USB-tuner and streaming services.

2. Streaming services

• 🌍 YouTube TV, Pluto TV: Free international channels (required) VPN).

3. USB-tuner

If you're Xiaomi. TV supportive DVB-T2 (is relevant for older models, you can connect an external tuner, for example:

• 🔌 AVerMedia or Hauppauge: USB-TV-receiving.

Advantages of alternative methods:

8. Frequently Asked Questions (FAQ)