How to set up a Xiaomi TV through your phone: a complete picture guide

Xiaomi TVs: Why is it easier to set up via phone?

Xiaomi’s latest-generation TVs (Mi TV Q2/Q1E, Redmi Smart TV X, Mi TV A Pro) support full-featured smartphone configuration, with no remote control or complex manipulations, saving time, eliminating errors when manually entering Wi-Fi passwords, and allowing Mi Accounts to be synchronized automatically between devices. According to Xiaomi, 68% of new TV users use a mobile app for initial setup, and 42% for daily management.

The advantages of setting up via the phone are obvious: no need to search for a remote in a box, it is easier to enter long passwords from Wi-Fi (especially if the network uses WPA3), and the interface of the Mi Home or Mi Remote app is intuitively more intuitive than the TV menu for beginners. Plus, the smartphone is always at hand - unlike the remote, which is easy to lose. But there are also nuances: not all models support wireless settings "out of the box" (for example, the budget Redmi TV 32" require a pre-connection to the network via Ethernet).

In this article, you can find step-by-step instructions for all scenarios, from basic setup of a new TV to solving connection problems, we will look at official methods through Mi Home and Mi Remote, as well as alternative methods for older models. If your TV is already connected to Wi-Fi but not visible in the application, check the section on solving typical errors.

Which Xiaomi TVs support settings via phone?

The wireless customization feature is available for all Xiaomi PatchWall TVs (version 3.0 and later).These are models released after 2019, including:

• 📺 The Mi series TV Q: Q2 75", Q1E 55"/65", Q2C 43"
• 📺 The Mi series TV A: A Pro 55", A2 43"/50"
• 📺 Redmi Smart Series TV: X55, X65, X43, X50 2022/2023
• 📺 The Mi series TV P1: 55, 65, 75" (with Dolby Vision support)

For older models (Mi TV 4A/4S 2018 and earlier), settings via the phone are only possible after manual Wi-Fi or Ethernet connection, and some features (such as Miracast or Google Cast) may require additional actions.

If your model is not in the table, check the PatchWall version in the TV settings: Settings → About TV → PatchWall version. To fully customize via the phone, version 3.0 or higher is required.

Preparation: What you need to set up a TV through your phone

Before you start setting up, make sure you have:

• 📱 Smartphone on Android 8.0+ or iOS 12+ (For Mi Home)
• 🔌 Xiaomi TV is connected to the outlet (but not on!)
• 📶 Stable 2.4GHz Wi-Fi (5GHz) may not work on older models)
• 🔑 Wi-Fi password (if the network is secure)

It is also recommended that:

• 🔄 Update the Mi Home app to the latest version (Google Play or App Store)
• 📱 Turn on Bluetooth and geolocation on the phone (you need to find devices)
• 🔋 Charge your phone at least 50% (setup can take up to 15 minutes)

⚠️ Note: If you are using a dual-band router (2.4 + 5 GHz with one network name, temporarily shut down 5 GHz in router settings.Many Xiaomi TVs don't support automatic switching between ranges when first set up.

If you have an iPhone, install the Mi Home app from the App Store (it officially supports iOS). For Android, it is better to download the app from Google Play - versions from third-party sites may contain viruses or outdated firmware.

Step-by-step: set up a new Xiaomi TV through Mi Home

This method is suitable for PatchWall 3.0+ TVs (see table above). If your TV has already been in use, reset to factory settings first (Settings → About TV → Reset).

1. Turn on the TV with a button on the case (not the remote!) and the Chinese/English greeting will appear on the screen, which is normal.
2. Open Mi Home on your phone and press + → Add device. Select Television category.
3. Follow the instructions in the appendix: 📱 The phone will be asked to connect to the network XIAOMI_XXXX — confirm. 🔑 Enter your Wi-Fi password (the app will switch the TV to your network). 🔄 Wait for the setup to be completed (3-5 The TV will restart.

Sign in to Mi Account (if you have an account) to sync your settings and access Miracast.

After you have completed the setup, the TV will automatically update the firmware (if a new version is available) and prompt you to configure Google Play Services (to install apps).

⚠️ Note: If the error "I failed to connect" appears at the stage of connecting to Wi-Fi, check: 🔄 Restart the router (turn off for 30 seconds). 📶 Make sure the network is operating in mode. 802.11n (not 802.11ac). 🔑 Wi-Fi passwords should not contain Cyrillic or special characters (!@#$%).

Alternative method: setup via Mi Remote app

If Mi Home doesn't work or your TV doesn't support wireless settings, use Mi Remote, which emulates the remote control and allows you to control your TV even without a Wi-Fi connection.

Instructions:

1. Download Mi Remote from Google Play or App Store.
2. Turn on the TV with a button on the case and select the language (if the menu appears).
3. In the Mi Remote app, tap + → TV → Xiaomi. Point your phone to TV and hold until the signal appears.
4. Use the virtual remote in the application to: 📶 Go to Settings → Network → Wi-Fi and connect to your network. 🔑 Enter the password using the on-screen keyboard (more convenient than the remote control!). 🔄 Update the firmware in Settings → On TV. → Update.

The advantage of this method is that it works even on older models (Mi TV 4A 2018), the disadvantage is that you have to manually adjust each setting, as with a conventional remote.

💡

If the on-screen keyboard in Mi Remote does not appear, turn the phone into landscape orientation - so the buttons will become larger and more convenient for entering a password.

Setting up a Smart TV and installing apps after connecting

After connecting to Wi-Fi, the TV will offer to configure Smart TV-Here's what we need to do:

1. Sign in to Google Account (if necessary) This will open access to the Google Play Store for app installs (YouTube, Netflix, IVI, etc.).
2. Set up a voice assistant: 🎤 B Settings → Select Google Assistant or Alice (for Russia). 🔊 To work the microphone on the remote may require firmware update.

Install the necessary applications:

• 📺 YouTube, Netflix, Prime Video via Google Play.
• 🎮 Game Center (for cloud games) - in Settings → Annexes.
• 📱 Mi Home (for smart home management) – if there are other Xiaomi devices.

💡

After setting up your Smart TV, be sure to check Settings → Privacy and turn off data collection if it is important to you. Xiaomi collects usage statistics by default, but it can be deactivated.

Problem Solving: TV doesn't connect to phone or Wi-Fi

If the setting is stalled, use this instruction:

🔴 Problem: Mi Home doesn't see TV

• 🔄 Restart your phone and TV (turn off the socket for 1 minute).
• 📱 Remove Mi Home and install it again.
• 🔌 Connect the TV to the router with an Ethernet cable (if there is a port).
• 🔄 Check that the developer mode is on (in some cases, this helps).

🔴 Problem: TV is not connected to Wi-Fi

• 📶 Change the router mode to 802.11n (router-setting).
• 🔑 Simplify the Wi-Fi password (use only Latin and numbers).
• 🔄 Turn off Band Steering on the router (if any).
• 📡 Check if the router has a filter on. MAC-address.

🔴 Problem: After setting up, there is no sound or image

• 🔊 Check if the sound on the TV is turned off (Mute button on the remote control).
• 📺 Make sure you select the right signal source (HDMI, TV or AV).
• 🔄 Restart the TV by holding the power button for 10 seconds.

⚠️ WARNING: If after resetting the Xiaomi TV is stuck on the logo, don't turn it off! 10-15 minutes, the system can recover data. If the freeze continues for more than a minute, 30 Please contact Xiaomi with the PatchWall model and version.

Additional features: control of the TV from the phone

Once set up, you can use the phone not only as a remote, but also for advanced control:

• 🎮 Play mode: Connect Bluetooth gamepad (e.g. Xiaomi Game Controller) via Settings → Bluetooth remote.
• 📱 Miracast: Duplicate your phone screen to TV via Settings → Connection and sharing → Wireless display.
• 🎵 Multi-audio: Sync audio with Xiaomi speakers (like Mi Soundbar) via Mi Home.
• 📼 Cloud Services: Set up automatic upload of photos from your phone to TV via Google Photos or Mi Cloud.