How to set up digital channels on a Xiaomi TV: The Complete Guide to 2026

Digital TV standard DVB-T2 It has long replaced analogue signal, but many users still have difficulty setting up channels on Xiaomi TVs. LG, mi TV This article has its own features: hidden menus, non-obvious paths to antenna settings and unique scanning algorithms. This article will help you understand how to properly connect and configure 20 free digital channels (and more, depending on the region) without calling the wizard.

We will discuss two main ways of setting up - automatic (recommended for most users) and manual (for complex cases when auto search does not find channels). Why the TV doesn't see the signal, how to choose the right frequency for your region, and what to do if the channels are constantly falling apart into pixels. FAQ Answers to frequent questions and a table of compatibility of antennas with Xiaomi models TV.

Important: the instruction is relevant for all modern Xiaomi TVs (series Mi). TV 4/4S/4A/4C/5/5X/6, Redmi Smart TV, Xiaomi TV Q2/Q1E and others, working on the basis of Android TV Google TV. If you're an older model 2018 Year, some menu items may differ - check the firmware version in Settings → On TV.

1. Preparation of the TV for setting up digital channels

Before you start a channel search, make sure your Xiaomi TV is ready to receive the signal. Many users miss this stage and then wonder why the scan does not give results.

• 📡 Antenna: connect the decimeter antenna (for DVB-T2) plug-in RF IN If you use a room antenna, place it against the window and avoid obstacles (walls, furniture).
• 🔌 Power antenna: if the antenna is active (with amplifier), connect it to the 220V network. TV There is an option to Power the antenna in the menu - turn it on (Settings) → Channels → Antenna settings).
• 📶 Cable: Check the integrity of the cable - inflections or damage to the insulation can degrade the signal.
• 🔄 Software Update: Outdated firmware may cause scanning malfunctions. Update TV through Settings → On TV. → Updating the system.

Advice for apartment buildings: if your house has a collective antenna, it may already be configured to digital channels. DVB-T2, And what frequency range is used, and that saves time when you manually set it up.

⚠️ Note: If you connect your TV via a set-top box (e.g., Xiaomi Mi Box), the channels are set up on the set-top box itself, not on the TV. HDMI instead TV.

2. Automatic search for digital channels on Xiaomi TV

This is the easiest way, and it works for 90 percent of users, and it automatically detects the multiplexes (channel packets) available in your region and stores them in your TV memory. Here's how to do this:

1. Turn on the TV and press the Menu (or Settings) button on the remote.
2. Go to Settings → Channels → Channels Configure.
3. Select Digital Channels (DVB-T2).
4. Click Automatic Search.
5. Indicate the country (Russia, Belarus, Kazakhstan, etc.) and the type of antenna (Cable or Ether).
6. Run the scan with the OK button.

It takes 2 to 10 minutes depending on the number of channels you find, and when you finish, the TV will suggest you save the list, and if you don't find any channels or there are fewer than 20, you can manually adjust the channels.

Is the antenna connected to the RF IN connector?

Active antenna power is included (if any)

The right country (Russia for the right country) DVB-T2)

Are there any interference from other devices (Wi-Fi routers, microwaves)

Is the TV software updated?-->

Why is TV less expensive? 20 There are two multiplexes in Russia.-1 and RTRS-2), each of which contains 10 If you can only see the channels. 10 The TV didn't catch the second multiplex, so it could be related to the:

• 📉 Weak signal (try to turn the antenna or use an amplifier).
• 🔍 Incorrect frequency (manually specify frequencies for your region).
• 🏙️ Obstacles (tall buildings, mountains) in the way of the signal.

Manual Channel Customization: When and How to Use

If the automatic search didn't work, you'd have to enter the settings manually, and this is also useful if you want to:

• 🎯 Configure only specific channels (e.g. regional channels).
• 📊 Change the order of channels in the list.
• 🔄 Update the list without a full scan.

To manually adjust, you'll need multiplex frequencies in your area.

• On the RTRS website (enter your city in search).
• In the mobile application "Telegid" or «DVB-T2 Info».
• Neighbors who have already set up digital TV.

Instructions for manual adjustment:

1. Go to Settings → Channels → Channels → Digital Channels → Manual Search.
2. Choose. DVB-T2 signal-type.
3. Enter the frequency of the first multiplex (e.g. 546 MHz for Moscow).
4. Set the bandwidth: 8 MHz and Modulation: 256 QAM.
5. Run the search with the OK button.
6. Repeat the steps for the second multiplex (e.g. 498 MHz for Moscow).

Example of frequencies for major cities (2026):

If your region has changed frequencies (for example, after reconfiguring the transmitters), the old data may not work.

4. Set up the order of channels and remove unnecessary

Once you've done a successful scan, you'll get a list of channels, but it can be uncomfortable, like takeovers, bad order, or unnecessary regional channels.

• 📺 Change of order: Go to Settings → Channels → Channel control. Select a channel and press OK (or Move button on the remote). Move the channel to the desired position using the arrows.

Canal removal:

Delete

Red

Resetting the list:

Settings → Channels → Reset channel settings

Tip: To quickly find your favorite channels, assign them a "favorite" number (for example, 1-5).

1. Open the list of channels with the Guide button on the remote.
2. Select the desired channel and press the Yellow button (or Favourite).
3. The channel will now be available in the Favorites section.

⚠️ Note: On some Xiaomi models TV (Like Mi. TV 4A 2019) may cause the channel order to get lost after the firmware update. To avoid this, export the channel list to the file through Settings before updating. → Channels → Exports/Imports (if the function is supported).

5. Solving Signal and Image Quality Problems

If the channels are found, but the image falls apart, the sound stops or disappears, the problem is a weak signal or interference.

• 📶 Signal Level Check: Open Settings → Channels → Signal status. If the level is below 50%, the antenna needs to be reconfigured.

Signal amplification:

• Turn the antenna towards the TV tower (you can determine the direction on the RTRS website).
• Use a signal amplifier (e.g. Locus L 032 or Terratec) H5).
• Replace the cable with satellite (marks) RG-6 or RG-59).

Elimination of interference:

• Turn off nearby devices (Wi-Fi routers, wireless phones).
• Check if the cable is near the sources of electromagnetic fields (microwave, refrigerator).

Common causes of a bad signal:

💡

If you have Xiaomi TV Q2 or Q1E, In the signal settings, there's an option called Reception Mode: Improved. Turn it on, and it'll help stabilize the weak signal.

6. setup of digital channels via the console (if there is no built-in tuner)

Some Xiaomi models TV (Like Mi. TV 4C 32 inches or Redmi Smart TV X for foreign markets may not have built-in DVB-T2 In this case, you will need an external console (for example, Xiaomi Mi Box S or Dune). HD). Connection algorithm:

1. Connect the set-top box to the TV via HDMI.
2. Connect the antenna to the connector. RF IN prefixed.
3. Turn on the TV and select the source of the signal. HDMI1/HDMI2 (port-by-port).
4. Start setting channels in the console menu (usually Menu). → Installation → Searching channels).

Advantages of using the prefix:

• 📦 More functions (ether recording, timeshift).
• 🔄 Possibility to connect satellite TV (if the console supports) DVB-S2).
• 🎮 Access to Android TV with the installation of additional applications (for example, Peers.TV or Wink).

Disadvantages:

• ⚡ Additional device = another remote and wire.
• 💰 Costs for the purchase of consoles (from 2000 to 10 000 rubles).
• 🔌 Possible delays in channel switching.

💡

If your Xiaomi TV doesn’t catch digital channels, check its specs on the manufacturer’s website. TV 4S EU) They may not support the Russian standard. DVB-T2 — In this case, the prefix is mandatory.

7. Update the channel list and reset settings

Digital TV is updated periodically: new channels are added, frequencies or broadcast formats are changed. TV I always showed you the current list, and you should update the settings from time to time:

• 🔄 Quick Update: Go to Settings → Channels → Update channels. Select Update existing channels (not full scan!).

Full reset:

Settings → Channels → Reset channel settings

Multiplex rescanning:

RTRS-3

When does a full reset need to be made?

• After the transfer (change of broadcasting region).
• If the channels are duplicated or displayed without names.
• After the TV firmware update.

⚠️ Attention: On Xiaomi models TV Android 11 firmware+ (Like Mi. TV Q2 2023) Channel resets can also reset Google Account and Wi-Fi settings. Write down passwords before resetting or back up through Settings → System system → Backup.

FAQ: Answers to Frequent Questions