Setup Xiaomi TV via phone: the full guide

Xiaomi’s modern smart TVs are complex multimedia centers that go far beyond simple buttons on the remote. Using a smartphone as a universal controller opens up access to advanced functionality, allowing you to enter text from the gadget’s keyboard, broadcast the screen and fine-tune image settings. This is especially true when the standard remote is lost, discharged or simply does not have a full-fledged keyboard for quick content search.

The process of integrating a mobile device with a TV is based on the use of Android TV or the built-in PatchWall shell, which requires a single LAN to work smoothly. Synchronization occurs over Wi-Fi, which provides minimal signal latency and high interface response speed. It is important to understand that for all functions to work correctly, both devices must be in the same network segment, otherwise detection may not be possible.

In this article, we will take a look at all the steps of connecting, from installing the necessary applications to advanced settings through ADB. You will learn how to turn your phone into a full-fledged control panel that can replace a regular accessory and even expand its capabilities. We will also look at typical connection errors and methods for eliminating them so that your multimedia system works without failure.

Equipment preparation and software

The first step to building a unified ecosystem is to install the right software on your smartphone. For Xiaomi and Redmi devices, it’s usually Mi Remote, which is often built into MIUI or HyperOS by default. For other brands like Samsung, Pixel or OnePlus, the official Google Home app or third-party solutions like Android TV Remote Control are the best choice.

Make sure your smartphone runs on the current version of the operating system, as older versions of Android may not support new device discovery protocols.It is also critical to check whether the Wi-Fi and Bluetooth module are enabled, as some remote features, such as voice input, may use Bluetooth Low Energy to transfer data.

⚠️ Note: If your router supports frequency sharing, make sure that both your phone and TV are connected to the same frequency (e.g., 2.4GHz), although in modern networks 5GHz and 2.4GHz are often combined into one. SSID.

It is not superfluous to update the management application itself through the Google Play store or Mi GetApps. Developers regularly release patches that improve connection stability and add support for new TV models. The old version of the application may simply “not see” your Xiaomi TV in the list of available devices.

Setup through the Mi Remote app for Xiaomi owners

If you are a lucky owner of a Xiaomi, Redmi or POCO smartphone, the setup process is as simple as possible thanks to the deep integration of system services. Mi Remote is a native tool here that does not require complex authorization or additional plugins. To start the settings, you just open the application and click the add a new device button, usually indicated by the plus symbol.

From the manufacturer list, select Xiaomi, and then the device type is TV (or Box, if you have a console). The system will offer several options for remotes; choose the one that visually matches your current remote, or use the automatic matching feature. The phone will have control buttons that you need to test by pressing them and watching the TV reaction.

• 📱 Click "Add Device" in the Mi Remote app's main menu.
• 📺 Choose the brand "Xiaomi" and category"TV" list.
• 🔘 Test the proposed control schemes by pressing the switch on button.
• ✅ Save your profile by giving it a clear name, such as “Jimia’s Living Room".

Once paired successfully, you’ll have access to a virtual touchpad that allows you to control your cursor on your TV screen, which is especially convenient in your browser or when navigating menus. The infrared port (if you have one on your phone) allows you to control even a TV turned off, turning it on, while Wi-Fi control only works when the TV is already on.

💡

Use the Mi Remote widget on your smartphone desktop for instant access to control your TV without logging in to the app.

Google Home and Android TV Remote

For users of pure Android smartphones or other brands, the de facto standard is the Google ecosystem. The Google Home app allows not only multimedia management, but also the integration of the TV into the smart home system. Once you install the app and log in to your Google account (which must match your TV account), the system will automatically detect compatible devices on the network.

An alternative is Android TV Remote Control, which provides a more detailed control interface for the TV, which emulates the remote with navigation buttons, a digital block and a separate keyboard for typing, a software solution that is particularly convenient for entering search queries on YouTube or Netflix, where typing from a regular remote is long and inconvenient.

The connection process in Google Home is as follows: open the app, click on the device add icon, select "Configure new device" and follow the instructions on the screen. The system scans the network and suggests adding the Android TV found. To confirm the pairing, a code may appear on the TV screen that you will need to enter on the smartphone.

Importantly, to work through Google Home, both devices must use the same Google account, which ensures that browsing history, installed apps and personalized recommendations are synchronized, and if the accounts differ, the TV can be displayed as a guest device with limited functionality.

Screen and multimedia broadcasting (Cast and Miracast)

One of the most popular features when setting up a TV through a phone is the ability to broadcast content. Chromecast built-in and Miracast technologies allow you to display an image from your smartphone to the big screen. In YouTube, Netflix or Chrome apps, just click on the broadcast icon (rectangle with waves) and select your Xiaomi TV from the list.

For full Mirroring, when the TV displays everything that happens on the phone’s display, including menus and games, the “Translation” or “Wireless Monitor” function is used. In Xiaomi smartphones, this function is called by swiping down the notification curtain and selecting “Translation” option. The TV should be running the corresponding mode or the Wireless Display application at this time.

The quality of the broadcast depends on the speed of your local network. To transmit video in high resolution (4K HDR), it is recommended to use Wi-Fi band 5 GHz, as the frequency of 2.4 GHz may not provide sufficient bandwidth, which will lead to image artifacts or sound dissynchronization.

⚠️ Attention: When streaming heavy gaming content through Miracast, you may experience an input lag, which makes the game uncomfortable.

Also worth mentioning is the DLNA feature, which allows you to stream media files (photos, videos, music) from your phone’s memory to your TV through standard media players, which is convenient when you need to quickly show photos to friends or run a video file without uploading it to a flash drive.

Advanced settings and debugging through ADB

For advanced users who want to get the most out of their Xiaomi TV, settings are available via the Android debugging bridge (ADB), which allows you to install applications from third-party sources, remove the system bloatware and change hidden system settings.

To enable debugging, go to the Settings menu → About the device → Build and click on "Build" seven times in a row. After you have "You've become a developer," go back to the settings menu where a new "Developer" option appears. USB (Which in the case of TV means debugging over the network).

adb connect 192.168.1.XX:5555

Enter. IP-The address of your TV (can be found in the Settings section) → Network → Status) in the command above, executed on a computer or phone with installed ADB. After a successful connection, you will get full root-like access to the file system and Android settings. TV.

Solving Typical Connection Problems

Although it seems simple, the setup process can encounter technical hurdles. One of the most common problems is that the phone doesn't see the TV on the list of available devices, most often because the devices are on different subnets, such as one connected to the guest Wi-Fi network and the other to the main one, or the AP Isolation feature on the router is activated.

Another reason may be an outdated cache. DNS conflict IP-In this case, it helps to completely reboot the router and all the connected devices, and it is also worth checking the settings of the firewall on the router, which can block the ports necessary for the operation of the protocols. DLNA Chromecast.

• 🔄 Restart router and modem by shutting down power for 30 seconds.
• 📡 Make sure that the router has disabled customer separation (AP Isolation).
• 🔒 Check if the antivirus on your phone is blocking local connections.
• 📲 Update the TV firmware through the Settings menu → On TV. → Updating the system.

If the problem persists, try resetting your TV network to factory settings, which will remove all stored Wi-Fi passwords and settings, but often resolves problems with stuck Android TV network services.

💡

90% of connection problems are solved by restarting the router or checking that the devices are on the same Wi-Fi network.