Set up TV on Xiaomi TV: from auto-search to manual fine tuning

Xiaomi TVs with Android operating system TV Google TV offer flexible options for viewing on-air, cable, satellite and IP-However, many users have difficulty in setting up their first setup, especially if it involves manually finding channels, connecting to a provider, or solving signal problems. In this article, we will discuss all the current ways to customize TV on Mi models. TV 4/4A/4S/5/5X, Redmi Smart TV and others, including nuances for different firmware versions.

It is important to understand that the configuration algorithm depends on the type of connection (DVB-T2), cable (DVB-C), satellite (DVB-S2) or IP-We will look at each option with the specifics of the Xiaomi interface, and give recommendations for optimizing the channel list and eliminating common errors. If you have just bought a TV or moved to another region, this guide will help you avoid common problems.

1. Preparation of the TV for setting up the TV

Before you start setting up, make sure your Xiaomi TV is ready to receive the signal.

• 📡 Connect the antenna or cable to the connector RF IN (or ANTENNA IN) You can use satellite TV for the back. LNB IN.
• ⚡ Check power: the TV should be connected to the network without the use of extension cords, which can cause interference.
• 🌐 Connect to the Internet (via Wi-Fi or cable) – this will be required to download channel lists (if used) IP-TV hybrid providers).
• 🔄 Update the firmware: go to Settings → On TV. → Update the system and install the latest version of the software.

Pay special attention to cable: if you use cable TV from a provider (such as Rostelecom, MTS or Beeline), make sure the cable is not damaged and properly compressed. For satellite TV, check that the converter (LNB) on the plate is compatible with your TV model - some Xiaomi TVs do not support DiSEqC 1.2 for managing multiple satellites.

⚠️ Note: If you connect via a set-top box (for example, from Tricolor or NTV-Plus), the channel setting is done on the console itself, not in the menu of the TV. TV signal-point HDMI (port to which the prefix is connected).

For models with a hybrid tuner (e.g. Mi TV Q2 75), you may need to choose the signal type manually. If the TV does not automatically determine the source, go to Settings → Channels → Signal Source and select DVB-T2 (air), DVB-C (cable) or DVB-S2 (satellite).

2. Automatic channel search on Xiaomi TV

The easiest way to set up a TV is to use auto-search, which is suitable for most users if the signal is stable and there are no specific channel sorting requirements.

1. Open Settings (cog in the upper right corner of the main screen).
2. Go to the Channels section → Channel setting.
3. Select Automatic Search.
4. Specify the signal type: 📶 DVB-T2 — for air TV (20 free channels in Russia). 📺 DVB-C — for cable TV from the provider. 🛰️ DVB-S2 — for satellite TV (transponder parameters will be required).

Start the search

After the search is complete, the TV will save the channels found and offer to sort them. In some regions of Russia (for example, in Moscow or St. Petersburg), the search engine can find up to 30-40 channels on the air, including the multiplexes RTRS-1 and RTRS-2. If there are fewer than 20 channels, check the signal quality (for this, see the next section).

⚠️ Note: If you use cable TV from a provider, you may need to enter frequency, symbolic speed and modulation before auto search. These parameters are usually specified in the contract or on the provider's website. For example, for Rostelecom in Moscow, 298 MHz frequency with 256 modulation is often used. QAM.

For satellite TV in manual mode, you will need to specify:

• 📡 Satellite (e.g., Yamal 402 or ABS-2).
• 🔢 Transponder frequency (e.g. 11766 for Tricolor).
• 🔄 Polarization (Horizontal or Vertical).
• 📶 Symbolic speed (e.g. 27500 for NTV-Plus).

Is the antenna/cable connected to the TV?

Is the correct signal source (DVB-T2/C/S2) selected?

Is there an Internet connection (for IP-TV)?

Is the TV firmware updated?

-->

Manual Channel Customization: When and How to Use

Autosearch doesn't always do the job -- especially if the signal is weak, or if the ISP is using custom settings -- manual tuning will help, and it's also useful if you want to:

• 🔍 Add a specific channel that is not automatically found.
• 📊 Change the order of channels in the list.
• 🚫 Remove unnecessary channels (such as advertising or duplicates).
• 🔄 Reconfigure parameters for unstable signal.

To set up the channel manually:

1. Go to Settings → Channels → Manual setting.
2. Select the signal type (DVB-T2, DVB-C or DVB-S2).
3. For terrestrial TV, specify the multiplex frequency (e.g. 546 MHz for RTRS-1 in Moscow). For cable TV, set the frequency, symbolic speed and modulation (check with the provider). For satellite TV, enter the transponder parameters (see table below).

Search

If the TV doesn’t save manual settings after rebooting, reset the channel list to factory settings: go to Settings → Channels → Reset and confirm action. This often solves the “flying” channels problems.

💡

If you don’t know the options for manual settings, try finding them through the TV Signal Finder app (available on Google Play for Android TV).It scans the airwaves and shows active frequencies in your region.

4.Tune in. IP-television (IPTV) Xiaomi TV

IP-TV allows you to watch channels over the Internet without an antenna or cable. TV There are two ways:

1. Through the built-in Live Channels app (available on Android TV 9+ models).

Let us consider both options in more detail.

Method 1: Built-in Live Channels app

This solution is suitable for users who receive IPTV from a provider (for example, Beeline or Dom.ru).

1. Enter data from the provider: 🔗 URL playlist (usually ending with a.m3u). 🔐 Login and password (if authentication is required).

Save the settings and wait for the list of channels to load.

Method 2: Third-party applications (SS IPTV, TiviMate)

If the built-in application does not support your playlist or requires advanced functionality (for example, EPG-transmission program, install one of the specialized applications:

• 📺 SS IPTV: Free and simple, supportive.m3u and.xml playlists.

To install the application:

1. Launch the app and add a playlist: For SS IPTV: go to Settings → Playlists → Add and enter URL. For TiviMate: select Add Playlist → Enter URL.

⚠️ Note: Some providers block access to the IPTV If the channels aren't loading, try it: 🔄 Reboot the router and TV. 🌐 Connect to VPN (For example, through the Windscribe app). 📧 Check with the provider whether access is supported MAC-Address (can be found in Settings) → On TV. → Status).

5. Channel list optimization: sorting, renaming, deleting

Once the channels are set up, the list often needs to be reworked, such as removing duplicates, sorting by topic or renaming, and on Xiaomi TV, this is done through the Channel Management menu:

1. Go to Settings → Channels → Channel Management.
2. Select the channel you want to change and click OK on the remote.
3. Use the options: 🔄 Move - change the position of the list. ✏️ Rename - specify a convenient name (for example, "1 channel") HD"). 🗑️ Remove the unnecessary channel. 🔒 Add to the list of selected.

For ease of viewing, you can create selected lists (for example, "Children's", "Sport", "News").

1. From the Channel Management menu, select Channel Lists → Create a new list.
2. Add the desired channels to it by holding the OK button on the remote.
3. Save the list and switch between them with the List button on the remote.

If the channels are duplicated (e.g., the same channel is found at different frequencies), remove the redundant versions, leaving the one with the best signal quality. You can check the quality in view mode: press the Info button on the remote, the signal level indicator (Strength and Quality) will be displayed. Optimal values: Strength > 70%, Quality > 80%.

💡

Update the channel list regularly (every 1-2 months) as providers can change frequencies or add new channels.

6. Solving problems with setting up TV on Xiaomi

If the TV can’t find channels or they are jammed, check the following points:

If the problem is not solved, try resetting the TV settings to factory:

1. Go to Settings → About TV → Reset settings.
2. Select Reset all settings (not Channel Reset!).
3. Confirm the action and wait for the reboot.
4. Repeat the channel setting from scratch.

If the problem persists, try manually searching with the frequency manually.