How to set up Xiaomi Redmi 10S: from the first inclusion to hidden chips

Xiaomi Redmi 10S is a budget smartphone with a MediaTek Helio G95 processor that still remains the current choice in 2026. But even such a device requires the right setup to unleash the full potential from performance optimization to hidden features of MIUI 14. This article will not just list the standard steps – we will break down the unique settings for the Redmi 10S that are not documented in official instructions, including working with fastboot, fine-tuning the camera and managing power consumption.

Have you just unpacked the new (or used) Redmi 10S and don’t know where to start? or want to make the most of a familiar device? We covered everything from basic activation to advanced tweaks that will make your smartphone faster, safer and more convenient. We will focus on the problems specific to this model, such as overheating when charging or bugs with a brightness in the latest versions of MIUI.

First Installing and Basic Setup

When you first turn on the Xiaomi Redmi 10S, the system offers to go through the initial setup wizard, and it is important to take your time here, because many of the settings set at this stage will then have to be changed manually.

On the welcome screen, select the language (we recommend Russian, as some translations to MIUI into other languages contain errors). Then connect to Wi-Fi - it is better to use 5 GHz networks if your router supports them: Redmi 10S has a dual-band adapter, and at 5 GHz the speed of downloading updates will be higher. Skip the offer to sign in to Mi Account (if you do not plan to use Xiaomi services) - this will save time and save you from unnecessary notifications.

• 🔄 Update: At the stage of configuration, the system will offer to update MIUI. Don’t refuse – the latest version fixes critical memory management bugs in Redmi 10S.
• 🔒 Screen lock: Select PIN-code instead of a pattern lock, it is more reliable and works faster on this model.
• ☁️ Backup: Disable automatic backup in Mi Cloud if you don’t want your data to be sent to Xiaomi servers.

After you have completed the setup wizard, go to Settings → About Phone and check the MIUI version. If it is older than 14.0.5, manually update via Settings → Software Update. For Redmi 10S, the current firmware solves the problem of hanging while shooting 1080p video, which was in earlier versions.

Optimizing performance and memory

The Xiaomi Redmi 10S has 4-6GB of RAM and 64-128GB of memory, but even that may not be enough when used actively. MIUI is known for aggressively controlling background processes, but sometimes this leads to spontaneous closure of applications.

Go to Settings → Applications → Application Management and select Auto Run. Here enable Auto Run for Messengers (Telegram, WhatsApp) and navigation apps (Yandex.Maps, Google Maps). For Redmi 10S, it is critical to also disable battery optimization for these applications: go to Settings → Battery → Battery → Optimize the Battery, find the right app and select Without Limits.

For additional acceleration, turn off the interface animation. Activate the developer mode by clicking 7 times on the MIUI version in About Phone. Then go to Settings → Additional → For Developers and install:

• 🎯 The scale of window animation → Off.
• 🎯 Scale of transition animation → Off.
• 🎯 Turn on GPU-acceleration → Includes (improves smoothness in games)

⚠️ Attention: Do not turn on the Force. GPU-rendering in developer settings – this can cause graphic artifacts in Redmi 10S because of the characteristics of the drivers Mali-G76.

Camera setup: Hidden features and bug fix

Xiaomi Redmi 10S (64 MP + 8 MP + 2 MP + 2 MP) is capable of more than it seems. By default, the camera app hides some modes, and processing algorithms sometimes spoil the pictures. Here's how to fix it:

The first thing you need to do is turn off the watermarks. Go to Camera Settings → Additional → Watermark and deactivate this option. Then activate Pro Mode (swipe right in the shoot menu) and manually configure:

• 📸 ISO → 100-400 (for daily photographs)
• 📸 Excerpt. → 1/1000 (moving-object)
• 📸 White balance → Auto (in Redmi) 10S manual adjustment often gives the worst result)

To improve video quality, turn on HDR10 in the camera settings (available only at 1080p 30fps resolution). Note that there is a bug in Redmi 10S that can slow down 4K video when shooting indoors. The solution is to use 1080p 60fps instead of 4K.

⚠️ Note: When shooting in 64 MP Redmi 10S file size ~20MB If you have a model with 64GB of memory, clean the folder regularly DCIM, Otherwise, the system will start to lag due to lack of space.

Battery and charging management

Xiaomi Redmi 10S battery (5000 mAh) holds the charge well, but there are nuances. First, fast charging 33W only works with the original power supply. If you use a third-party adapter, the phone will charge at 18W or slower. Second, MIUI by default limits the charge to 80% to save the battery - this can be turned off.

To remove the restriction:

1. Go to Settings. → Battery.
2. Select Battery Settings → Charging.
3. Turn off the optimised charging option.

To extend the battery life, we recommend:

• 🔋 Do not let the discharge below 15% – this is critical for lithium polymer batteries.
• 🔋 Charge your phone at a temperature of 10-35°C (in Redmi) 10S When overheating, charging is automatically limited to 10W).
• 🔋 Calibrate your battery once every 3 months: completely discharge your phone, then charge to 100% without interruption.

💡

If the Redmi 10S is very warm when charging, remove the case - in this model, the heat sink is located close to the rear panel. Also avoid using the phone while charging (especially games), as the Helio G95 is prone to overheating.

Communications and Networks: 4G, Wi-Fi and GPS

Xiaomi Redmi 10S supports Dual 4G VoLTE, but by default the second SIM slot only works in 3G mode. To enable 4G on both SIMs:

1. Go to Settings. → SIM-maps and mobile networks.
2. Choose the second. SIM-map.
3. In the Network Type section, install 4G (recommended).

To improve your Wi-Fi reception, turn off Automatic Switching to Mobile Data in Wi-Fi settings, a feature that often works falsely, especially in low signal conditions. If you have problems with GPS (long-term location), calibrate your compass:

1. Open Google Maps.
2. Click on the blue dot of your location.
3. Select Calibration of the compass and follow the instructions.

Security: Unlocking the bootloader and Root

If you want to install custom firmware or get Root rights, you first need to unlock the bootloader. Note: this will reset all data and void the warranty. For Redmi 10S, the process looks like this:

1. Link the device to Mi Account in Settings → Xiaomi Account.
2. Go to the Mi Unlock website and download the Mi Unlock Tool.
3. Launch your phone in Fastboot mode (clip Power + Volume down).
4. Connect to your PC and follow the instructions in the Mi Unlock Tool.

Once unlocked, you can flash TWRP and get Root through Magisk.Please note: on Redmi 10S with MIUI 14, some Magisk modules (e.g., ViPER4Android) may not work due to changes in SELinux.

⚠️ Attention: Unlock the bootloader on Redmi 10S version MIUI 13.0.8 requires waiting 7 days after the account is linked.

💡

Unlocking the bootloader on Redmi 10S irreversibly deletes data from the internal drive. backup via Settings → Additional → Backup or manually copy files to your PC.

Reset to factory settings and recovery

If the Xiaomi Redmi 10S is starting to lag a lot or you want to sell the device, do a hard reset.

Method 1 (via settings):

1. Go to Settings → About the phone → Reset settings.
2. Choose to erase all data.
3. Confirm the action.

Method 2 (via Recovery):

1. Turn off the phone.
2. Press Power + Volume Up to Enter Recovery.
3. Choose Wipe Data → Wipe All Data.

After the reset, the phone will reboot to the “out of the box” state. If you are selling the device, be sure to unplug Mi Account in Settings → Xiaomi Account → Sign out, otherwise the new owner will not be able to activate the phone.

FAQ: Frequent questions about Xiaomi Redmi 10S