Modern Xiaomi and RedmiBook laptops are famous not only for their metal body, but also for quality touchpads that are often not inferior to Apple’s solutions. However, out of the box, the cursor’s behavior or reaction to multi-touch gestures may not match the individual preferences of the user. Windows standard settings sometimes work incorrectly or offer too limited functionality for fine-tuning.
Sensitivity issues, accidental clicks or gesture failures are common complaints from Chinese brand ultrabook owners. The right configuration allows you to turn a standard panel into a powerful productivity-enhancing control tool. In this guide, we will look at everything from basic calibration to specific drivers.
Peripheral failures should not be ignored, as they can signal both software conflicts and the need for physical cleaning. We'll look at diagnostic methods that can help determine the nature of the malfunction. In 90% of cases, problems are solved by software without going to the service center.
Basic setting of cursor and scroll parameters
The first step should always be to check the standard operating system settings. In Windows 10 and 11, touchpad management is placed in a separate menu where you can adjust speed and sensitivity. Go to Settings → Devices → Touchbar to see the main list of options available.
Here, it's important to look at the cursor speed slider. Too high can lead to inaccurate positioning, too low can cause fatigue of the hand. For most users, the average is optimal, but for graphics or code, the settings are customized.
- 🖱️ Change the cursor speed to accurately hit the small interface elements.
- 📜 Adjust the direction of scrolling (natural or standard) depending on your habits.
- ✋ Adjust the delay before starting drag and drop to avoid accidental disruptions of objects.
- 🚫 Enable or disable the "Tap to click" function at your discretion.
Pay special attention to the scroll section. Xiaomi touchpads often implement inertial scrolling, which can be too fast. If you work with long spreadsheets or code, it is better to slow down or change the scroll step, which will make navigation smoother and more predictable.
Remember, changes are immediate, so test each parameter immediately after you use it. If the cursor starts to shake or jump, return to the default settings. Stability is more important than exotic speed settings.
Gesture management and multi-touch functions
One of the main features of Xiaomi laptops is that it supports gestures similar to those used in macOS. Three fingers, four fingers, swipes on the edge are all flexible, but these features require the correct operation of the Precision Touchpad drivers to work properly.
In the settings menu, you'll find a Gestures section where you can assign actions for different combinations, for example, swiping three fingers up can unfold the task representation and down can roll all the windows, which makes windows much faster.
If you don't like standard Windows gestures, you can use third-party utilities, although Xiaomi rarely does. Built-in functionality usually covers 95% of the needs of the average user. The main thing is not to assign too complex combinations that are difficult to reproduce quickly.
⚠️ Note: When assigning gestures, avoid conflicts with system commands. For example, if you swipe with four fingers to start a calculator, this may block the standard desktop switching action.
It's also worth checking your palm sensitivity settings. Xiaomi laptops are equipped with algorithms that ignore random touches when printing. If these algorithms are too aggressive, the cursor may get stuck. Try changing the sensitivity level in the same settings menu.
Installation and update of touchpad drivers
The most common reason for touchpad problems on Xiaomi laptops is the absence or incorrect operation of drivers. Unlike other brands, Xiaomi does not have a single global software support center, so finding the right file can take time. I2C HID Device and ELAN/Synaptics.
The first thing you need to do is check Device Manager. Press Win + X and select the appropriate item. Find the "Input Devices (HID)" or "Mice and other pointing devices." If you see a device with a yellow exclamation mark or "Unknown device", the problem is in the driver.
☑️ Driver verification
Download drivers should only from the official Xiaomi website in the support section for your specific model (Mi Notebook Pro, Air, RedmiBook). Installing universal drivers from aggregator sites can lead to unstable operation or complete failure of the touchpad.
Once the driver is installed, be sure to restart the laptop. Sometimes the system caches the old settings, and without rebooting the new settings will not apply. If the problem persists, try to delete the device in the Manager and click "Update hardware configuration".
| Laptop model | Type of touchpad | Required driver | Frequent problem |
|---|---|---|---|
| Mi Notebook Air 13.3 | Synaptics | Synaptics SMBus Driver | Lack of multi-touch |
| Mi Notebook Pro 15.6 | ELAN / Precision | I2C HID Device | Self-inflicted clicks |
| RedmiBook 14 | Precision Touchpad | Windows Update Driver | Cursor delay |
| Mi Gaming Laptop | ELAN | ELAN Input Device | Ignoring touch |
Calibration and elimination of cursor drift
Cursor drift is a situation where the arrow slowly shifts to the side without you being involved, which can be caused by static electricity, surface contamination, or software failure. First, try calibrating through the control panel.
Type the word “calibration” in a Windows search and select “Screen Calibration” (although this is for the display, there are often links to the periphery there too) or use specialized software. For touchpads, Xiaomi sometimes helps to reset the power controller.
If the cursor keeps going, check the touchpad surface. Fat spots or moisture droplets can create false touch coordinates. Rub the surface with a soft cloth with isopropyl alcohol. Surface cleanliness is critical for capacitive sensors.
In rare cases, touchpad reflashing is required, a complex procedure that is best avoided unless absolutely necessary, and it is usually enough to update the motherboard BIOS, since firmware updates often contain fixes for lower-level controllers.
⚠️ Warning: Do not use aggressive chemicals or abrasives to clean the touchpad.This can damage the oleophobic coating and worsen the slipping of the finger, which will lead to jerks of the cursor.
Conflicts with external devices and software
Sometimes the touchpad stops working properly due to a conflict with the connected mouse or other input device. In settings Settings → Devices → Touchpad is marked "Do not change the status of the touchpad when you connect the mouse." If it is removed, the touchpad turns off automatically.
And macro software like AutoHotkey or mouse software can also be impacted, and they can take control of the cursor. Try to run a clean Windows boot to keep out third-party software.
Check if the tablet mode is on if you have a transformer. In this mode, the system can ignore the touchpad, waiting only for touch input. The switch is in the center of notifications (the bottom right corner of the screen).
Antivirus software also sometimes blocks input from devices, considering it suspicious. HID-Temporary shutdown of protection will help diagnose the problem.
Diagnostics of hardware faults
If the software methods didn't work, maybe the problem is the hardware. The touchpad on Xiaomi laptops is plugged into the motherboard. Over time, the contact may oxidize or the plume may move away when hit or fall.
Symptoms of hardware failure: the touchpad only works after a strong press, reacts only in certain areas, or the cursor randomly jumps around the screen ("glitchy"). In such cases, the software setting is powerless.
To check, you can boot from LiveUSB on another operating system (like Linux), if the touchpad behaves the same way on Linux, then the problem is exactly hardware. If it works, look for driver conflict in Windows.
In some RedmiBook models, the touchpad is integrated into the top cover along with the keyboard. Replacing the entire body may require disassembly. Self-repair is possible, but requires accuracy and a set of tools.