Xiaomi AirDots 2’s current wireless headphones have become the benchmark for the budget segment due to sound quality and stable connectivity. However, like any smart appliance, they require the right initial setup to unlock the full potential. Many users face difficulties when first pairing or updating the device’s firmware.
In this article, we will take a look at the entire process, from unpacking to fine-tuning through specialized applications. You will learn how to avoid typical synchronization errors and ensure maximum battery life of the gadget. Proper calibration at the start will save you from future problems with channel desynchronization.
We'll focus on resetting, which is often the only solution for strange sound artifacts, and understanding the logic of the case and the indicators will allow you to always monitor your condition. TWS-Let's start to fine-tune your audio device in detail.
Primary activation and charging of the device
Before trying to pair Xiaomi AirDots 2 with a smartphone, you need to make sure that the battery level is sufficient. Factory charging is usually about 60%, but for stable operation of the Bluetooth module when you first turn on, it is better to fully charge the case.
The display on the front of the case will tell you the status of the process. A burning red indicator means active charging, and turning it off indicates that the battery is full. Don't ignore this stage, as the discharged headphones may not enter pairing mode or work unstable.
💡
Before first use, wipe the contact pads on the headphones and inside the case with a dry cloth - oxidation can prevent charging.
It is important to understand that lithium polymer batteries are sensitive to overheating. Do not leave the device in direct sunlight or near heating appliances while charging. The optimal ambient temperature for this procedure is between 10 and 30 degrees Celsius.
The process of pairing with Android and iOS
The main step in setting up is to pair the headphones with your mobile device. First, remove both headphones from the case at the same time. You'll notice that the indicators will flash white, signaling that you'll go into search mode. If only one headphone flashes, put them back in the case and try again.
On your smartphone, go to the Settings menu → Bluetooth and start searching for new devices. Xiaomi AirDots should appear in the list of available gadgets 2 or AirDots BASIC_R. Click on the name to connect. Once you've successfully synchronized, the voice assistant will report the "Connected" status".
- 📱 Make sure that Bluetooth on your phone is on and visible to other devices.
- 🎧 Remove headphones from the case strictly at the same time to synchronize the left and right channel.
- 🔋 Make sure that the case is not completely discharged at the time of removing the headphones.
Sometimes the system can request a pairing confirmation or an access code. 99% of the time, the Bluetooth protocol of this model doesn't require a code, and the connection happens automatically. If the system requests a code, try entering 0000, although this is rare for this model.
Use of Mi Earbuds Basic App
For advanced functionality management, it is recommended to install the official Mi Earbuds Basic app or its analogues, such as Material You or AndBuds. The standard Bluetooth menu in Android often does not display the charge level of each headphone separately, and third-party software corrects this flaw.
Once you install the app and grant the necessary permissions, you can see the exact percentage of charge on the left and right earphones, as well as the case, and the interface also provides information about the firmware version and the ability to check the touch control.
| Function | Description | Availability |
|---|---|---|
| Battery charge | Display % for L/R | Through the app |
| Headphone search | Sound signal | In the annex |
| Update of the PO | Installation of the new version | Manual/Car |
| Game mode | Reducing delay | Triple touch. |
It's through third-party utilities that you can often activate hidden functions, like more accurate sensor calibration, and without the use of special software, you're limited to the basic functionality that the manufacturer has put in place.
Setting up sensor control
Xiaomi AirDots 2 is controlled exclusively through the touch panels located on the outside of the headphones. By default, the setting is: single touch pauses music or answers a call, double – starts the last dialed number or tracks, and triple activates the voice assistant.
⚠️ Attention: Pressing force is irrelevant, touch area and duration are important. Don't push the earphone with your finger, or it may shift in the ear and fall out.
To activate low-latency game mode, you need to quickly tap the touch zone three times. The headphones will emit a characteristic audible signal to confirm the activation of the mode. Repeat deactivates the function. This is critical for mobile shooter players, where reaction is important.
- 🎵 Single touch: Pause / Replay / Call reception.
- 📞 Double touch: Repeat last call (right) / Next track (left).
- 🎮 Triple touch: Activate voice assistant or game mode.
💡
The game mode reduces sound latency, but can consume battery power faster due to increased activity of the Bluetooth module.
Some users complain about random sensor activation when adjusting the headphone. To minimize this, try to touch only the center of the touch zone, avoiding the edges. Software can not change the action of the buttons on this model, they are hardwired into the microcontroller.
Update of the headphone firmware
The manufacturer periodically releases updates to improve connection stability and sound quality, you can check the version of the software in the application or by audible signal when turned on.
The upgrade process can take anywhere from 5 to 15 minutes, during which time the headphones should be in close proximity to the phone (no more than 10 cm), interrupting the process can lead to improper operation of the device, so make sure that you do not get distracted.
What to do if the update is suspended?
Often, an update is required if the headphones are only mono or one channel is quieter than another. The new version of firmware fixes synchronization errors between left and right modules. It is worth checking for updates at least once every six months.
Resetting settings and troubleshooting problems
If the headphones are no longer connected to each other or the phone can't see them, you have to reset to the factory settings, which is a universal solution for most software glitches, and it's simple, but it requires a precise sequence of actions.
☑️ Reset algorithm Xiaomi AirDots 2
First, remove the Xiaomi AirDots 2 profile from the list of paired devices on the phone. Then place both earbuds in the charge case. Without removing them, press and hold the touch zones on both headphones simultaneously for 20 seconds. The indicators should flash red several times, then go out.
⚠️ Warning: Do not remove the headphones from the case during reset. If you remove them early, the procedure will not end, and the settings will not reset.
After a successful reset, the indicators on the case can light up, showing the charging process. Now the headphones are ready for the new (patch) as new devices, in most cases, this solves the problems of desynchronization of the sound range.