Smartphone Xiaomi Mi 10 is not just another update of the line, and a full-fledged flagship that requires a competent approach to the initial configuration. Immediately after turning on the device, the user faces a lot of system proposals that may seem intrusive, but when properly managed, turn the shell MIUI into a powerful tool for work and entertainment.
It is important to understand that the default basic settings are not always optimal for the experienced user, for example, the screen refresh rate can be limited to save charge, and the notification system is overloaded with advertising offers. A competent initial setup will take only 15-20 minutes, but will ensure comfortable use of the gadget throughout its life.
In this guide, we will discuss all the stages: from activation SIM-You will learn how to avoid typical errors, disable unnecessary advertising and configure data transfer from the old device without losing important information.
Primary activation and operation with SIM-card
The process begins immediately after the device is turned on. The system will suggest choosing an interface language and connecting to the Wi-Fi network. At this stage, it is critical to take your time and carefully read pop-ups, since Xiaomi often offers to install additional applications or log into the Mi Account with special privileges.
Installation SIM-The Xiaomi Mi 10 cards are made through a tray located on the lower end of the case. To extract the tray, a special key is used, which comes with a kit, or a thin clip. Note the scheme applied on the tray itself: this model uses a combined slot, but the second one is used. SIM-Only a memory card can be used if the model supports extension, or dual-SIM without a memory card is used depending on the regional version.
⚠️ Attention: Insert SIM-card only when your phone is turned off or use the hot replacement feature if it is active, but avoid extracting the tray during intensive data writing to internal storage so as not to damage the file system.
After the physical installation of the card, the system will ask you to confirm your mobile internet usage. 5G network (in supported regions), make sure that the settings are selected in the appropriate mode. → SIM-Maps and mobile networks to manually prioritize the network.
Be sure to activate VoLTE and ViLTE if your carrier supports these technologies, which will ensure high quality voice calls and video communications over a 4G/LTE network, which is especially true for the flagship Snapdragon 865 processor installed in this model.
Screen setting and refresh frequency
The Xiaomi Mi 10 display is based on AMOLED-It can be used to select automatic mode by default, which does not always respond quickly enough to changes in content. To get the smoothest possible picture, you must manually set the frequency of 90 Hz.
To do this, go to Settings → Screen → Update Frequency. There are three options available here: 30 Hz, 60 Hz and 90 Hz. Choosing 90 Hz greatly improves the smoothness of interface animations, page scrolling and games, but also increases energy consumption. However, given the battery capacity of 4780 mAh, the compromise is worth it.
The color profile settings are also worth a special attention. From the screen settings menu → Color mode can be chosen between “Saturated”, “Standard” and “Classic”. For most users, the “Standard” mode is optimal, which provides the most accurate color reproduction, close to the sRGB standard.
| Parameter | Recommended value | Impact on the system |
|---|---|---|
| Frequency of update | 90 Hz | High smoothness, +10-15% to battery consumption |
| Brightness | Auto (corrected) | Saving charge, protecting the eyes |
| Dark subject matter | Scheduled. | Reducing the load on the AMOLED matrix |
| Permission | FHD+ (default) | Optimal balance of clarity and performance |
It’s also worth activating the DC Dimming feature (if available in your firmware version via an engineering menu or developer settings), which reduces screen flickering at low brightness, reducing eye fatigue when reading at night.
Data transfer and restoration of backup
When it first starts, MIUI will suggest using the Mi Mover app to transfer data from the old device, which is the most efficient way to migrate, allowing you to transfer contacts, photos, applications and even system settings, the process does not require a connection to a computer and works by creating a local Wi-Fi point.
☑️ Checklist before data transfer
If you are switching from your iPhone, use the “Move Data from iOS” feature, which allows you to migrate contacts, calendar and photos, but it is worth considering that applications and their data (save in games, correspondence in messengers) may not be compatible between different operating systems.
It's important to keep the data transfer going. Even if the progress bar is stuck on a value, wait a few minutes — the system can handle large files or a database of contacts. Forced reboot at this point can damage the file system or lose some data.
⚠️ Note: When transferring data from your device to Android, make sure that the old phone has disabled the Battery Optimization feature for the Mi Mover app, otherwise the system may interrupt the transmission in the background.
Once the migration is complete, it is recommended to check the integrity of the data: open a gallery, contacts and several heavy applications. If some data is not displayed, try repeating the procedure of selective transfer only for missing categories.
Optimizing the MIUI interface and removing advertising
MIUI is known for its functionality, but also for having built-in advertising in system applications. To make smartphone use comfortable, you need to manually disable personalized recommendations. This is done in the Settings menu → Passwords and Security → Privacy → Advertising services.
You have to turn off the "Get personalized recommendations" switch, which is not going to take ads out of all apps, but it's going to reduce the number of ads and make them less intrusive, and you have to go through the system applications like "Security," "Downloads," "Music," "Themes."
In each of these applications, the settings (usually through a three-dot menu or gear) are “Receive recommendations,” which is a mandatory step for the clean operation of the system to turn off, and it is also recommended to disable the MSA (MIUI System Ads), although the system will ask for confirmation several times before turning off.
Hidden Advertising Settings
Desktop customization also plays a major role. Xiaomi Mi 10 allows you to use two styles: “Classic” (icons and widgets separately) and “No menu” (as in iOS). You can switch the mode with a long tap over the empty space on the desktop, selecting Settings in the lower right corner.
Camera and photography settings
The Xiaomi Mi 10 camera is equipped with a 108 MP main module. High-resolution mode must be activated to get the highest quality photos. In standard mode, the camera uses pixel binning, combining 9 pixels into one for better light-sensitive result, which is great for shooting in the afternoon and in low light.
However, if you want maximum detail for later printing or cropping, switch to 108 MP mode in the camera menu.It is worth remembering that this mode does not work HDR and night mode, and the file size can reach 30-40 MB.
- 📸 Night mode: Use a tripod for better results as shutter speeds can last a few seconds.
- 🎥 Video 8K: Available at 24 frames per second, but heats the device and fills up memory quickly.
- 🤳 Portrait: Adjust background blur level with a slider before shooting for more natural effect.
Remember video stabilization. In the camera settings, enable stabilization if it's available for the resolution you select, and it's critical for motion video, because optical stabilization (OIS) combined with software will give you the best results.
💡
Save your original photos in the Mi Cloud or Google Photos cloud with the Original setting to avoid losing 108MP quality when compressed.
Safety, battery and performance
Xiaomi Mi 10 has a powerful hardware stuffing, but for stable operation requires the right setup of power saving. Battery Saver system can be too aggressive, closing the background applications that you use all the time (messengers, mail, trackers).
To ensure that important notifications arrive on time, go to Settings → Battery and Performance → Application Activity Control. Find the programs you need (Telegram, WhatsApp, Viber) on the list and set background activity restriction to No Limits mode, which will prevent the process from being “killed” by the system.
You also need to set up the fingerprint scanner that's built into the screen, and even though it's optical and fast, for reliability, you'd better add the same fingerprint twice at different angles, which will increase the speed of unlocking in difficult conditions, such as when using protective glass.
⚠️ Warning: Don't use third-party memory cleaners and accelerators from Play Market.Based optimization MIUI It works more efficiently, and third-party applications can, on the contrary, reduce autonomy, constantly restarting system processes.
To extend the life of a lithium polymer battery, try to keep the charge in the range of 20-80%. the Optimized Charging feature in the battery settings helps control this process by learning your daily routine.
💡
Proper setting of application background activity is a key factor for timely notifications and stable operation of messengers on MIUI.