How to set up a light indicator on Xiaomi Redmi Note 10 Pro: from basic functions to hidden chips

The light indicator on the Xiaomi Redmi Note 10 Pro is not just a decorative element, but a useful tool for alerting you about missed calls, messages and other events. The indicator doesn't flash, doesn't flash, doesn't light up the wrong color, or it's turned off by default. In this article, we'll look at all the ways you can set up the light. LED-The indicator is from standard parameters in MIUI Hidden functions through the engineering menu.

It is important to understand that the features of the indicator on the Redmi Note 10 Pro depends on the firmware version (MIUI 12/13/14) For example, in the global versions, some options may be limited, but in the Chinese versions, they may be expanded.

If you want to not only turn on the indicator, but also change its color for different applications, adjust the blinking frequency or even use it as a night light, read on. For those who like experiments, we will reveal the secrets of the engineering menu, where additional parameters are hidden.

1.Where is the light indicator on the Redmi Note 10 Pro and how it works

On the Xiaomi Redmi Note 10 Pro, the LED light is located at the top of the screen, next to the front camera. LED It was a separate element, here it is integrated into the display and uses the technology Always-On Display (AOD) display.

The indicator can operate in three modes:

• 🔴 Blinking – signals missed calls, SMS or notifications from apps (color depends on the type of event).
• 🟢 Constant – burns without blinking when charging or in the “Do Not Disturb” mode".
• 🔵 Dynamic – changes color and frequency depending on the application (for example, green for WhatsApp, blue for Telegram).

By default, the indicator is activated only for system notifications (calls, SMS), But you can also customize it for third-party messengers, but there's a caveat: some versions. MIUI (for example, MIUI 12.5 Global) The option is hidden in deep settings.

⚠️ Note: If the indicator does not work after updating the firmware, try resetting the Notifications app settings in the Settings menu → Annexes → Application management → Three points. → Reset settings.This often solves the problem without completely resetting the phone.

2. How to turn on the light indicator through standard settings MIUI

The easiest way to activate the indicator is through the notification menu.

1. Open Settings and go to Notifications and Status bar.
2. Tap on the item Notification Indicator (in some versions) MIUI It is called a light indicator or LED-indicator).
3. Activate the switch Show notification indicator.
4. In the Applications section, select messengers (such as WhatsApp, Telegram) for which you want to include alerts.
5. Adjust the indicator color and blinking frequency (not available in all versions) MIUI).

If the Notification Indicator is not on the menu, your firmware does not support this feature at the interface level, in which case you will have to use an engineering menu or third-party applications (we will discuss this below).

Check if the indicator is turned on in the notification settings

Make sure the screen is not active in the "Do Not Disturb" mode.

Send a test message to your phone from another device

Restart your smartphone if the indicator does not respond-->

On the Redmi Note. 10 Pro MIUI 13/14 And there's an option called Adaptive Indicator, which automatically adjusts the color to the app, like Viber's purple, Gmail's red, and you turn it on:

1. Go to Settings → Display → Additional.
2. Find the Adaptive Indicator and activate it.
3. In the list of applications, mark those for which you want to enable the function.

3. Configure the indicator through the engineering menu (hidden functions)

If you don't have the flexibility you need, you can use the engineering menu. MIUI, Be careful that incorrect changes can lead to malfunctions in the indicator!

To open the engineering menu:

1. Open the Phone app.
2. Enter the combination: ##3646633## (some versions of MIUI may require ##4636##).
3. Go to the Hardware Testing → Lights section.

Here you will see a few parameters:

After the changes, press Set and restart the phone. If the indicator started to work incorrectly (for example, it burns constantly or does not blink), return the default values:

LED Brightness: 100


LED Blink Rate: 1000




LED Color Mode: 0




LED Persistence: 1000

⚠️ Note: On some versions MIUI After changes to the engineering menu, the indicator may stop responding to notifications from messengers. In this case, reset the Notifications application settings (see the instructions in the first section).

4.Use of third-party applications for advanced customization

If built-in options MIUI You don't like it, you can install third-party utilities:

• 📱 Light Manager (Legacy) - allows you to assign unique colors and flashing modes for each application. MIUI, where there is no built-in indicator setting.
• 🎨 LED Blinker Notifications supports adaptive colors, frequency and duration of glow. There is a function "Night mode" so that the indicator does not interfere with sleep.
• 🔧 Notification Light Control is a simple tool to turn on/off the indicator without unnecessary functions.

To make these applications work properly, they need special permissions.

1. Open Settings → Applications → Application Management.
2. Find the installed utility (for example, Light Manager) and tap it.
3. Issue permissions: Notifications, Auto Start, Background work.
4. In the application settings, activate the option to Show over other windows (if any).

Please note: MIUI 14 Some applications may not work due to tightening security policies. In this case, try to roll back on the MIUI 13 or use ADB-commands for forced inclusion of the indicator.

💡

If after installing a third-party app, the indicator does not respond to notifications, try turning off battery optimization for it. → Battery → Battery Optimization, Find the App and Choose Without Limits

Frequent problems and their solutions

Even after setting it up correctly, the indicator can malfunction. Let's look at typical situations and how to fix them:

If none of these methods worked, try resetting your network settings:

1. Go to Settings. → SIM-maps and mobile networks.
2. Slip on Network Reset.
3. Confirm the action and restart the phone.

In 90% of cases, this solves problems with the indicator, as the failure can be associated with a conflict of network services and notification systems.

6. How to use the indicator as a night light or alarm

Few people know, but the light indicator on the Redmi Note 10 Pro can be programmed to perform non-standard tasks, such as making it a night light or alarm at low battery power.

You'll need MacroDroid (available on Google Play) to do this, and you can create automatic scripts with it:

• 🌙 Nightlight: The indicator is dim from 22:00 to 7:00 if the phone is connected to charging.
• ⚡ Charge alarm: The indicator flashes red when the battery level is below 15%.
• 🔔 Alarm alert: 10 minutes before the alarm clock, the indicator starts flashing green.

Example of macro settings for nightlight:

1. Open MacroDroid and create a new macro.
2. Select Time as the trigger. → Time range (specify 22:00-7:00).
3. Add a condition: Nutrition. → Connected to charging.
4. In actions, select Notifications. → Insert light indicator.
5. Adjust the color (such as warm white) and brightness (30–50%).
6. Save the macro and activate it.

To signal a low charge, use a battery level trigger → Below 15% and the effect of the Notice → Flashing indicator (red).

⚠️ Warning: Continuous use of the indicator in nightlight mode can reduce the life of the LED. To minimize the risk, set the minimum brightness (not higher than 50) and use the function for no longer than 8 hours in a row.

7. Alternative methods of notification if the indicator does not work

If the light indicator on your Redmi Note 10 Pro is permanently out of order or cannot be configured, there are alternative alert options:

• 📱 Always-On Display (AOD): Displays time, notifications and charge level on the screen off. → Display. → Always-On Display.
• 🔊 Sound cues: Set up unique tunes for different apps in Settings → Sounds and vibrations → Notification sounds.
• 💡 Screenlighting: Enable the option to Wake up in Settings → Display. → Lock and protect to keep the screen on fire when new notifications are made.
• 📳 Vibration: Set up unique vibration patterns for contacts → Select contact → Change. → Vibration.

If you prefer. AOD, Note that this feature consumes extra battery power (about 1-2% per hour) to reduce consumption:

• Set a shutdown timer (for example, from 23:00 to 7:00).
• Turn off notifications (leave only the time and date).
• Use dark topics because AMOLED-Redmi Note 10 Pro screen consumes less power when displaying black.

💡

Always-On Display is a good alternative to a light indicator, but remember that it reduces battery life. AOD only when charging or during important periods (e.g. while waiting for an urgent call).

FAQ: Frequently Asked Questions