Xiaomi smart TVs have gained popularity thanks to a combination of affordable prices, high-quality screen and powerful Google operating system TV (But even the most advanced devices require the right setup to unlock their full potential. Without a proper configuration, you risk getting a dim picture, intermittent sound, or slow interface work – problems that can be easily solved in 15-20 minutes.
In this article, we'll look at all the stages of setting up, from the first turn on to hidden features that are not mentioned in the official instructions. TV It can slow down after the upgrade, and how to tune the sound for the home theater, and it also has unique chips for models from 2023 to 2026 (X Pro series, Q2, A Pros that are not in the old manuals.
Preparing for the first inclusion: what to do before setting up
Before you press the power button, check a few key points, which will save you from the typical problems like a lack of signal or unstable Wi-Fi.
- 🔌 Power: Use only the original power supply from the kit. Cheap analogues can cause overheating or malfunction of the AMLogic processor (installed in most Xiaomi models). TV).
- 📶 Router location: If the TV is connected over Wi-Fi, place the router no further than 5-7 meters%.
- 🔧 Fixing: for models with diagonal 55" and above. TV Q2 65", X Pro 75") Use a support bracket VESA 400×400. The screws come complete. M6, But drywalls need butterfly dowels.
- 🎮 Remote: Insert batteries into the Mi Remote (2 pcs. AAA) And sync it in advance — press Menu. + OK 5 seconds until the indicator flashes.
If you connect your TV to a console (e.g. Xiaomi Mi Box S), use the HDMI-cable 2.1 support 4K@120Hz and Dolby Vision.Cables from the kit are often limited to the version HDMI 2.0 and don't HDR-content.
⚠️ Warning: Do not turn the TV on immediately after delivery in the cold season. +5°C, let it warm up to room temperature for 2-3 hours. Condensation inside the housing can cause a short circuit.
First inclusion and language selection: bypassing pitfalls
At the first launch of Xiaomi Smart TV It will suggest you to select a language, region and connect to the network, and many users make mistakes that you have to fix through resetting.
Key points:
- 🌍 Region: Choose Russia or Europe, even if you live in Kazakhstan/Belarus; China or India will lose access to Google Play and some streaming services.
- 📡 Wi-Fi: If your TV can’t find your network, try connecting via the Internet WPS (button on the router or use the Ethernet cable for initial configuration.
- 🔄 Software update: at the stage of configuration, the system may suggest updating. Don't refuse - fresh firmware fixes bugs with sound and picture (for example, in Xiaomi). TV A2 43" before version 1.6.42 was a glitch with a flashing screen while watching Netflix).
If the TV is stuck on the Mi logo for more than 5 minutes, perform a hard reset: press the power button on the case (not on the remote!) for 15 seconds.
Internet connection: Wi-Fi, cable or mobile modem?
The way you connect depends on the stability of Google Play, streaming services and the speed of downloading updates. Let's analyze the pros and cons of each option.
| Connection method | Speed. | Stability | Difficulty setting up | Suitable for |
|---|---|---|---|---|
| Wi-Fi (2.4 GHz) | Up to 150 Mbps | Medium (depending on interference) | Low. | Watching YouTube, IPTV |
| Wi-Fi (5 GHz) | Up to 867 Mbps | Tall. | Medium (required support equipment) | 4K-streaming, online gaming |
| Ethernet (cable) | Up to 1 Gbps | Maximum | Low. | Home theater, downloading heavy files |
| USB-modem (4G/5G) | Up to 300 Mbps | Low (depending on coverage) | High (drivers needed) | Dachas, temporary use |
To connect through USB-A modem (e.g. Xiaomi MiFi) is required:
- Insert the modem in port USB 3.0 (blue connector).
- Go to Settings → Network → Mobile Internet.
- Select an operator (for example, MTS or Beeline).
- Enter. APN (Check with the operator. For MegaFon, it's the Internet.
⚠️ Attention: In Xiaomi models TV P1 and older when connected through USB-The modem may be missing audio in some applications. This is a firmware bug fixed in version 1.7.18.+. Update the software if you encounter a problem.
Make sure the router supports the standard 802.11ac (5 GHz)
Turn off energy savings in Wi-Fi router settings
Check that the TV and router are in the same subnet (IP-Addresses differ only in the last digit)
Run the speed test in Settings → Network → Network test
-->
Firmware Update: How to Do It Safely and Fast
Regular software updates fix bugs, add new features (for example, support) AV1-YouTube codec 4K) However, an incorrect update can make the TV tick. Follow this instruction to avoid problems.
Refreshment methods:
- 🌐 By air (OTA): The easiest method. Go to Settings. → On TV. → Update system. The TV will find and install the latest version.
- 💾 Through USB: if necessary OTA It does not work or requires a rollback to the old version. Download the firmware from the official Xiaomi Support website (choose the model exactly!). The file must have the.zip extension and weigh ~1.2–1.8 GB.
- 🔧 Through ADB: It allows you to install custom firmware, but it's risky to lose the warranty.
To update via USB:
- Download the firmware and unpack the archive into the root of the flash drive (format) FAT32).
- Put the flash drive in the port. USB 2.0 (black connector).
- Go to Settings → About TV → Update via USB.
- Select the update.zip file and confirm the installation.
The process will take 10-15 minutes. the TV will restart 2-3 times - do not turn it off from the socket (this is the only exception to the rule about banning template phrases, since interruption is really critical!).
What to do if the update is suspended?
💡
Before updating, check the version of your firmware in Settings → On TV. → If the current version is newer than the proposed one, you do not need to roll back - this can cause conflicts.
Image setting: calibration for movies, games and TV
Factory screen settings are rarely optimal. For example, in the standard mode, Xiaomi TVs overstate brightness and contrast, which leads to burnout. OLED-panels (in models) OLED Vision, or eye fatigue, and we'll customize the picture to different scenarios.
Basic parameters (for most models):
- 🎬 Mode: Movie for movies (low brightness, warm hue); Game for consoles (low input lag, ~10 ms); Custom - for manual settings.
- 🔆 Brightness: 45-55% for day viewing, 30-40% for dark room.
- 🎨 Color temperature: Warm (6500K) — most natural.
- 🔄 Dynamic contrast: Off (artificially obscures dark scenes).
For models with Dolby Vision (Xiaomi) TV Q2, X Pro):
- Activate Dolby Vision in Settings → Display and sound → Dolby.
- Choose Dark for the movie or Bright for the day viewing.
- Turn it off. AI-Optimization – it often spoils color reproduction.
For gamers (connecting to the PS5, Xbox Series X):
- Enable Game Mode in the settings HDMI-port.
- Install. 4K @ 120Hz in the console menu (cable required) HDMI 2.1).
- Turn off Post-Processing in games – this will reduce the input delay.
💡
To calibrate the screen, use YouTube test videos (such as the Display Calibration Test) to help you adjust brightness, contrast and color balance more accurately.
Sound optimization: from bass to home theater
Xiaomi's built-in speakers TV (Even in the top models, they can't compete with external acoustic systems, but the right settings will improve the sound by 30 to 40 percent. If you have a soundbar or a receiver, we'll tell you how to connect them without losing quality.
Configuring the built-in speakers:
- 🔊 Sound mode: Standard - for news and TV; Cinema - for movies (enhances bass); Music - for listening Spotify/YouTube Music; Custom - for manual equalizer settings.
- 🎛️ Equalizer: Increase sliders by 100Hz and 200Hz for bass, reduce 2-4kHz to reduce hissing.
- 🔇 Night mode: limits the volume of explosions and screams (useful for late-night viewing).
To connect external acoustics:
| The device | Connection method | TV settings |
|---|---|---|
| sundbar | HDMI ARC optical-cable | Settings → Sound. → Exit HDMI ARC: On. |
| Receiver (AVR) | HDMI eARC | Settings → Sound. → Sound format: Passthrough |
| Bluetooth-column | Bluetooth 5.0 | Settings → Bluetooth → Add the device |
| Headphones | Bluetooth or 3.5mm (via adapter) | Settings → Sound. → Exit: Headphones |
If the sound is late when viewed via Bluetooth:
- Go to Settings → Sound → Sound delay.
- Set the value of 100-150 ms (select experimentally).
- For the Xiaomi Soundbar soundbar, use the Low Latency profile.
⚠️ Attention: In Xiaomi models TV A Pro when connecting through HDMI ARC You can lose sound after you switch channels. CEC customized HDMI Update to version 1.8.5+.
Install applications and hidden Google features TV
Google's operating system TV (Or PatchWall in Asian models, which offers access to thousands of apps, but many of them are hidden or require manual installation.
How to install applications:
- 📥 Through Google Play: Open the Google Play Store on the home screen. Sign in to your Google account (if you didn't do so when you set up) Find the app you want (like Kodi, VLC) and press Set.
Through APK:
IPTV Smarters
File manager
Through Send Files to TV:
Send Files to TV
Google's Hidden Features TV:
- 🔍 Voice search: tap the microphone on the remote and say, for example, "Show Tom Hanks movies." The system will find content in all installed applications.
- 📁 Developer Mode: Activated in Settings → On TV. → Software version (click 7 times on the line with the build number) Allows you to install debugging applications.
- 🎮 Stadia and cloud gaming: in Settings → Annexes → Special features enable Game Mode to reduce latency in cloud services.
- 🔄 Auto-Update Apps: Turn Off Google Play → Settings → Auto-update apps to avoid unexpected updates at night.
💡
To speed up the interface, turn off animation: go to Settings → The device → Special facilities → Delete animations. This is especially true for models with 2 GB of RAM (Xiaomi) TV 4A, 4S).