Setting up the Wink remote on Xiaomi TV: from connectivity to fine-tuning

Synchronizing the universal Wink remote with a Xiaomi TV seems like a simple task — you don’t face nuances yet. The manufacturer promises compatibility out of the box, but in practice, users face problems from the lack of response of the TV to commands to the incorrect operation of individual buttons. In this article, we will analyze all the stages of configuration — from choosing the right remote model to manual code programming, and also consider hidden functions that are not written in the official instructions.

The feature of Xiaomi TVs (Mi TV 4/5, A2, P1, etc.) is the use of a proprietary control protocol, which not all universal remotes support out of the box. Wink remotes (Wink RM-330, Wink RM-Pro+, Wink Play models) are officially compatible, but require the right configuration. If you have tried to set up a bundle and nothing has come out of the way, do not rush to blame the technique: 80% of the case, the problem lies in the wrong device code or the missed synchronization step.

1.What Wink remotes are suitable for Xiaomi TV?

Not all Wink remotes work equally well with Xiaomi TVs.The manufacturer regularly updates the database of supported devices, but some models require manual adjustment.

• 🔹 Wink RM-330 — base model with IR support. Suitable for Mi TV 4A/4C, But it may not recognize voice commands.
• 🔹 Wink RM-Pro+ — Extended version with Bluetooth and Wi-Fi support.Recommended for Mi TV 5 Pro and Xiaomi TV Q2.
• 🔹 Wink Play is a remote with a touchpad and voice assistant, and it only works with Android TV. TV 10+.
• 🔹 Wink RM-350 — Budgetary option for simple models (Mi) TV 4S). Does not support brightness control through the remote control.

Important: If your Xiaomi TV is released before 2019 (like Mi TV 3), chances are it’s using an outdated IR protocol, in which case even compatible Wink remotes may require manual code entry (see section 4).

2. Preparing Xiaomi TV for synchronization

Before setting up the remote, you need to make sure that the TV is ready to connect, and skipping this stage is the main cause of synchronization failures.

Turn the TV on (not in sleep mode!)|Disable the original Xiaomi remote (to avoid signal conflicts)|Check that the IR receiver on TV is not closed with a decorative panel.|Update the TV firmware to the latest version (see Settings) → On TV. → Updating the system)-->

Special attention is paid to firmware updates. Xiaomi TVs based on Android TV 9 and below may not recognize commands from Wink remotes due to outdated IR port drivers. For example, in the 2018 Mi TV 4A 32 model, after upgrading to Android TV 11, support for advanced sound management commands via universal remotes appears.

⚠️ Note: If your Xiaomi TV is connected to the network via 5GHz Wi-Fi, temporarily switch to 2.4GHz during setup. Some Wink remotes models (e.g. RM-Pro)+) Use this range for initial synchronization.

3. Set up the Wink remote via the app

The most reliable way to sync is to use the official Wink Remote app (available for Android and iOS).

1. Install the app from Google Play or App Store and sign up.
2. Click "Add device" → "TV" → select the Xiaomi brand.
3. The app will offer a list of models. If you don't have one, select "Other Xiaomi model."
4. Follow the instructions on the screen: point the remote to the IR receiver of the TV (usually located on the right or bottom of the screen) and hold the Power button until the TV turns off.

If the TV doesn't respond:

• 🔄 Try another code from the list (the app has the option "Try another code").
• 📶 Make sure there are no obstacles between the remote and the TV (even the glass of the furniture facade can block the IR signal).
• 🔋 Replace batteries in the remote – discharged cells may not provide enough signal power.

💡

If the Wink Remote app doesn’t find your Xiaomi TV model, try choosing the Redmi brand – some Xiaomi TVs are recognized by that name.

4. Manual programming of the remote (if the automatic setting did not work)

If synchronization through the application failed, you will have to enter the codes manually. For Xiaomi TVs, the following codes are relevant (depending on the remote model and TV):

Instructions for manual code entry:

1. Hold the SET (or OK) and Power buttons on the Wink remote for 5 seconds until the indicator lights up.
2. Enter the first code from the table (e.g. 1245 for Mi TV 4A).
3. Point the remote to the TV and press Power. If the TV is off, the code fits.
4. If there is no response, repeat the steps with another code.

⚠️ Note: Codes for Xiaomi TVs with L prefix in the model (e.g, L32M5-5A) In this case, try the codes for the Redmi brand: 2255, 4477 or 6688.

5. Configure additional functions (voice control, macros)

After successful synchronization, you can configure the advanced features:

• 🎤 Voice control: Wink Play and RM-Pro remotes+ A voice assistant is available. To activate, say "Hi Wink", then a command (for example, "Enable Netflix on Xiaomi"). TV"). Important: The TV must be connected to the same Wi-Fi network as the remote.
• 🔄 Macros: Wink Remote can create a chain of commands, for example, one click on the "Cinema" button will turn off the lights (through smart lamps), turn on the TV and run the Disney app.+.
• 📶 Wi-Fi management: If your remote supports Wi-Fi Direct (e.g., RM-Pro)+), Connect it to the TV through Settings → Devices → Add an accessory, which allows you to control the TV even without a line of sight.

For Xiaomi TVs based on Android TV 11+, the Feedback feature is available in Wink remotes: when you press the buttons on the remote, a visual confirmation will be displayed on the TV screen (for example, the volume icon when adjusting the sound). To activate it, go to Settings → Special Features → Feedback during management.

6. Troubleshooting: The remote does not work or is not working properly

If after setting up the remote Wink refuses to control the TV Xiaomi, check the following points:

If the problem persists, reset the remote to the factory settings:

1. Hold the SET (or OK + Power) button for 10 seconds until the indicator blinks 3 times.
2. Repeat the setup procedure again.

💡

In 90% of cases, Wink remotes on Xiaomi TV are affected by three reasons: the wrong device code, the dead batteries, or the IR signal being blocked by physical obstacles.

7. Alternative ways to control Xiaomi TV without the original remote

If the Wink remote has not been successfully set up, consider alternative options:

• 📱 Mi Remote app: The official app from Xiaomi (available for Android and iOS) lets you control TV over Wi-Fi or Bluetooth. Supports voice input and gestures.
• 🎮 Gaming controllers: If you have a Xiaomi Game Controller or Sony DualSense, they can be connected to your TV via Bluetooth and used for navigation.
• 🖥️ Keyboard and mouse: Xiaomi TVs on Android TV support the connection USB-Keyboards and mice, convenient for text entry or surfing the Internet.

To connect alternative control devices:

1. Go to Settings → Devices → Bluetooth and other devices.
2. Select "Add Accessory" and follow the instructions on the screen.

If you use Google Assistant or Alice from Yandex, you can control your Xiaomi TV with your voice through smart speakers.

1. Connect the TV and speaker to the same Wi-Fi network.
2. In the smart assistant app, add the device "Xiaomi TV".
3. Use commands like, “OK Google, turn on Xiaomi TV on Netflix.”

FAQ: Frequent questions about setting up Wink on Xiaomi TV