A modern digital console from a major carrier often becomes the central hub of home media, but managing two separate devices can be uncomfortable. The owner of a modern Xiaomi Mi TV or a budget model Redmi TV faces the need to use two remote controls, which significantly reduces the usability of viewing content. Fortunately, engineers have envisaged the possibility of integration, allowing Rostelecom to train the remote control of the TV.
Synchronization is based on the operation of an infrared port (IR) or Bluetooth connection, depending on the modification of your equipment. The correct configuration allows you to transmit volume, turn on and select the signal source directly through the console. In this guide, we will discuss all available pairing methods in detail, paying special attention to the nuances of working with the Android TV operating system, which is installed on Xiaomi TVs.
Successful execution of the procedure will save you from having to search for a second remote in the dark and allow you to enjoy movies with maximum comfort.It is worth noting that some older console models may have limitations on the number of codes to be memorized, so it is important to follow the algorithm of entering into programming mode. The key point is the exact match of the code base of the remote by Rostelecom with the IR receiver of a particular model of Xiaomi TV.
Preparation of equipment and compatibility check
Before you start any manipulations, you need to make sure that the hardware of both devices is working properly. First of all, check the power elements in the console remote control, as a weak battery charge can lead to failures in training mode. Also make sure that the Xiaomi TV is on and is in the line of sight of the IR port of the console Rostelecom.
There are two main types of operator remotes: classic infrared and modern Bluetooth models with voice control. For Mi TVs, Bluetooth versions are preferable, since they do not require line of sight and have advanced functionality. However, the method of setting the power and volume buttons often remains unified for both types of devices.
⚠️ Note: If the Rostelecom remote flashes the indicator when you press any buttons, but the TV does not respond, you may be in training mode, which was activated accidentally. OK or TV.
An important step is to determine the exact model of your TV, as code tables may vary for different years of release.Look for a sticker on the back of the device or go to the Settings menu → About the TV to know the full name of the model, which is information you might need when you manually select the code if the automatic mode doesn't work.
Automatic configuration through the system menu
The easiest way to pair is to use a built-in customizator that is activated when you first connect or through the system menu. Modern Wink and RTK consoles often offer automatic search for the right driver for the TV. To start the process, you need to simultaneously press the OK and 1 buttons (or 2, depending on the model) until the LED lights up with a constant light.
Once the programming mode is activated, a window may appear on the Xiaomi TV screen requesting confirmation of actions. The system will suggest checking the volume and turn on buttons. If the TV responds to test commands, you must save the configuration by pressing the corresponding button on the console. In the absence of a reaction, the procedure is repeated using an alternative code.
- 🔘 Press the button combination to enter training mode (usually OK + 1 OK + 2).
- 📺 Point the remote to the TV and wait for the settings menu to appear on the screen.
- ✅ Check the operation of each programmed button and confirm the preservation of the result.
In some cases, automatic search can take a few minutes, as the device consistently rummages through the code libraries. Do not interrupt the process and keep the remote pointing at the IR receiver of the TV. If 2-3 minutes later there is no result, it is possible that your Xiaomi model uses a non-standard protocol, and you will need manual data entry.
☑️ Checking before setting up
Manual code entry for Xiaomi TVs
If the automatic mode failed, you have to manually enter digital combinations. For Xiaomi and Redmi TVs, codes are often used from a range of brands that produce matrixes or other devices. OEM-The input process begins with activation of the programming mode, after which you need to quickly enter the four-digit code corresponding to the manufacturer.
Once the code is entered, Rostelecom's LED should flash to confirm that the command has been accepted. Immediately check the switch off and adjust the sound. If the TV doesn't respond, the procedure is repeated with the following code from the table. This method requires patience, but is often the only way to revive control on old or rare models.
| Brand/Series | Code 1 | Code 2 | Code 3 |
|---|---|---|---|
| Xiaomi / Mi | 0030 | 0259 | 1017 |
| Redmi TV | 0030 | 0810 | 1245 |
| Mi Box (Android) | 0030 | 0060 | 0178 |
| Common code | 9999 | 0000 | 1234 |
Note that codebases can be updated, and current combinations are sometimes published on the console manufacturer's website. If none of the standard codes fit, try using generic combinations for Android TV devices. In rare cases, code from Philips or Sharp TVs helps, since Xiaomi often uses their components.
What if the code doesn't fit?
Setting up Bluetooth remote with voice control
Owners of Rostelecom’s new voice-enabled consoles have the advantage of having a Bluetooth connection. For these devices, the setting of the TV buttons may be different from the classic IR setting. You first need to attach the console itself via Bluetooth, usually by pressing the Home and Back buttons simultaneously.
After a successful Bluetooth connection, the remote gets the ability to control the console interface, but the TV control buttons (volume, power) still require a separate setting via the IR port or CEC. In the settings menu of the consoles Settings → Remote and accessories, select the option to configure the TV buttons and follow the instructions on the screen.
The advantage of Bluetooth remotes is that you can control without direct vision. You can put the console behind the TV or in the closet, and the commands will run steadily. However, an infrared port is still necessary to transmit commands to turn on the TV, since most Xiaomi TVs do not support awakening via Bluetooth from third-party devices.
- 🔗 Perform pairing of the remote with the console via Bluetooth in the system menu.
- ⚙️ Go to the settings section of the TV control buttons.
- 📡 Make sure the remote's IR port is directed to the TV receiver for calibration.
⚠️ Note: When setting up the Bluetooth remote, make sure that there are no obstacles between the remote and the console at the time of pairing, otherwise the process may be interrupted at the stage of exchanging encryption keys.
Using the HDMI CEC function to manage
One of the most efficient controls is HDMI CEC (Consumer Electronics Control) technology, which allows you to transmit control commands over an HDMI cable, eliminating the need to program the remote's IR port, and if your Xiaomi TV and Rostelecom support this standard, you can control the volume and turn on one remote automatically.
To activate the function, you need to go to the settings of the Xiaomi TV and find the HDMI Control or CEC point, switching it to the On position. On the console, Rostelecom should also make sure that the HDMI control option is activated in the video output settings. After turning on these parameters, the console will begin to control the TV without additional training.
💡
The CEC function is often called differently: on Xiaomi it can be simply "HDMI Control" and on other devices it can be "Anynet+", "Simplink" or "Bravia Sync".
It is important to note that implementation CEC It can be unstable on some models. If you notice delays in reaction or spontaneously turn off devices, try turning off and reconnect the cable. HDMI Or replace it with a better, shielded version. CEC sensitive to the quality of the connection.
Addressing common problems and conflicts
During the setup process, users often encounter a situation where the remote starts executing commands chaotically or stops responding to certain buttons. This can be caused by a code conflict or a “sticking” of the training mode. Rostelecom often helps to reset the remote settings by removing the batteries for 10-15 seconds and then pressing all the buttons in the absence of power.
Another common problem is that you don't have full coverage of the IR range, and if you've programmed the volume, but it's controlled by jerks, maybe the frequency of the modulation doesn't match, and in this case, you should try reprogramming the button using a different code from the list, even if the previous one seems to be working partially.
If the Rostelecom remote controls the TV but doesn’t turn it off, check the power saving settings. Some Xiaomi models go into deep sleep, from which it is impossible to get out with the standard “Power” infrared signal. In such cases, setting macros or using smart home scenarios, if the ecosystem allows, helps.
- 🔄 Completely reset the remote by removing the batteries and pressing all buttons.
- 🔋 Replace your batteries with new ones, even if the old ones look like they’re working.
- 📶 Make sure there are no powerful sources of IR radiation between devices (e.g. incandescent lamps).
💡
The most common cause of problems is discharged batteries in the remote, which give enough current to operate LEDs, but not enough power for a stable IR signal.