Integrating the provider’s hardware with modern technology often raises questions among users, especially when it comes to popular brands like Xiaomi.The situation when you need to configure the remote with a Xiaomi TV is one of the most common in technical support, because the Mi TV ecosystem runs on the Android operating system, which requires a specific approach to managing external devices.
You don't need to be an engineer to do this, but knowing the exact digital combinations will speed up the process. Device synchronization allows you to control volume, signal sources and power from one universal controller. Below we will discuss in detail all the ways of pairing, current codes and nuances that are rarely talked about in official instructions.
Preparation of equipment before setting up
Before you start entering codes, you need to make sure that both devices are in good condition and ready for communication. Infrared port on the remote Rostelecom should be clean and batteries charged, as a weak signal often causes programming failures. Xiaomi TV should be on and in the waiting mode for the signal from the external remote.
Check that there are no obstacles between the remote and the receiver of the signal on the TV, since the IR waves travel in a straight line.
It is also important to determine your console model, as the configuration algorithms for RT-9010N devices and newer versions may differ.
- 🔋 Make sure that the remote has fresh type batteries. AA or AAA.
- 📺 Turn on the TV and wait for the Android operating system to load fully TV.
- 📡 Place the remote control Rostelecom at a distance 10-15 see from the bottom of the TV screen.
⚠️ Note: If you use a Bluetooth-enabled remote (voice-controlled models), the procedure may be different from setting up IR remotes that require line of sight.
Automatic setting of the remote by Rostelecom
Modern ISP remotes have automatic code selection, which makes life easier for the user, allowing the system to sort through the digital combinations itself until the TV responds to the command, and to start the process, you need to press the TV and OK buttons (or Setup, depending on the version of the remote firmware) simultaneously until the indicator blinks twice.
Once the programming mode is activated, the remote will start sending on/off signals to the TV. Once the Xiaomi screen goes out, you immediately press the OK button to save the result. If the automatic brute force has passed the desired code, the procedure can be repeated, but with manual adjustment or transition to manual method.
☑️ Checking before auto-tuning
Automated mode is convenient because it does not require memorizing complex sequences of actions.
However, in rare cases, the system may select incorrect code that will partially perform functions, such as adjusting the volume but not turning off the device.
Manual setting using codes
The most reliable way to ensure full compatibility of functions is to manually enter a specific manufacturer's code. For Xiaomi and Mi TVs, there are several standard combinations that are prescribed in the Rostelecom equipment database. To enter manually, press the TV button on the remote, holding it, and press the OK button, after which the indicator should light up.
Type one of the combinations shown in the table below. If the code is entered correctly, the indicator will blink, confirming the command. Then check the volume and power buttons. If the TV does not respond, repeat the procedure with the next combination from the list.
| Model TV | Code 1 | Code 2 | Code 3 |
|---|---|---|---|
| Xiaomi Mi TV | 1213 | 0260 | 1056 |
| Mi TV Stick | 2033 | 1199 | 0030 |
| Xiaomi Redmi TV | 0213 | 1213 | 3456 |
| Android Common Codes | 9999 | 0000 | 1111 |
What if no code is available?
The manual method takes longer, but gives the most predictable result.
Write the successful code on paper or in your phone’s notes so that if you replace the batteries, you don’t need to look for information again.
Configure via the console menu (for new models)
Owners of modern consoles Wink or Interactive 2.0 available more advanced way of setting through the software menu of the console itself. This method allows you not only to program the IR signals, but also to configure the buttons of quick access. To enter the configuration menu, click the Settings button (cogs) on the remote, then go to the System section and select the Setting remote.
The list that opens up is to find the manufacturer of your TV, Xiaomi, and it will offer you test checks: turn on, turn off, adjust the sound. If all tests are successful, save the configuration. This method is especially effective because it uses an updated codebase downloaded from the provider's server.
Digital configuration
The menu interface may vary depending on the version of your console software.
Make sure the console is connected to the internet to download current device profiles.
Addressing common problems
Even if all instructions are followed, there may be situations where the remote is not working correctly or refusing to execute certain commands. Often the problem lies in the conflict of infrared signals or the peculiarities of the Android TV operating system. For example, the TV may not turn off with the console if the corresponding function is not activated in the HDMI-CEC settings.
⚠️ Attention: If the remote is frequently malfunctioning, check if the IR receiver of the TV is closed with a decorative frame or sound panel.
If the Rostelecom remote stopped controlling the Xiaomi TV after the firmware update, try resetting the remote completely. Remove the batteries, press all the buttons for 10 seconds, insert the batteries back and repeat the programming procedure. It is also worth checking whether the TV has a Quick Start feature, which sometimes blocks external shutdown signals.
💡
Use your smartphone camera to check the IR emitter. Point the remote into the camera lens and press a button — you should see the purple glow of the diode on the screen.
Failures are often associated with the discharge of batteries, even if they seem new.
Make sure you are not too close to the TV during setup, the optimal distance is about a meter.
Using the Mi Remote app on your smartphone
Alternatively, or as an addition to the physical remote, you can use a smartphone. Many Xiaomi devices have an integrated IR port, which allows you to turn the phone into a universal remote. The Mi Remote app (or Remote) has ready-made profiles for Rostelecom consoles, which allows you to control both the TV and the console from one screen.
To set up, launch the app, select Add Device -> Prefix -> Rostelecom. Follow the instructions on the screen to check the signals, which is especially convenient if the main remote is lost or malfunctioning.
💡
Mi Remote allows you to control your TV even without an infrared port on your phone if both devices are connected to the same Wi-Fi network using Wi-Fi Direct technology.
The mobile application offers a more convenient text input to search for content.
The screen of the smartphone allows you to see more information about the reproduced content.